How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-17 · 7 min read · Independent comparison
• Linsoul 7Hz (Zero:2) biggest strength: A 10mm dual-cavity dynamic driver with a PU+metal composite diaphragm, tuned for balanced tonality with roughly 3dB more bass than the original Zero — punchy but still controlled.
• Linsoul 7Hz biggest trade-off: It's an in-ear design with only passive noise cancellation, and the fit depends entirely on getting a good seal in your ear canal.
• FiiO /JadeAudio JT1 biggest strength: A 50mm dynamic driver with N52 magnets and a PEK+PU+aluminum foil composite diaphragm, in a closed over-ear shell that isolates sound and reinforces bass.
• FiiO /JadeAudio JT1 biggest trade-off: It's a full over-ear headphone with no active noise cancellation, so it's bulkier and less pocketable than an IEM.
• Who each is for: Pick the 7Hz if you want a compact, cable-swappable IEM for music on the move. Pick the JT1 if you want an over-ear headphone for desk work, recording, editing or gaming.
The Zero:2 is the second generation of the 7Hz and Crinacle collaboration, and the design brief is easy to read from the specs. It uses a 10mm dual-cavity dynamic driver with an upgraded PU+metal composite diaphragm, which the brand says moves faster and more responsively than the previous version. The result, on paper, is harder-hitting bass without losing crispness in the midrange and treble. The frequency range runs from 10Hz to 20kHz, so the claimed extension at both ends is generous for a single dynamic driver.
The tuning story matters here. The original Zero was known for tonal balance, but that balance also meant a tamer low end. The Zero:2 keeps the same overall signature and adds roughly 3dB in the low frequencies. In practice, that means basslines have more weight and impact while vocals and instruments should still sit in a sensible place in the mix. If you found the first Zero a little polite, this is the version aimed at you. It's still a single dynamic driver, so expect the coherence that comes with one driver handling the whole range rather than a multi-driver crossover.
Who should buy it: commuters, students and gamers who want a small, light IEM they can drop in a pocket, and anyone who values an easy-to-drive wired connection and a replaceable cable. Who should skip it: anyone who dislikes in-ear fit, wants over-ear comfort for long sessions, or needs serious isolation — the noise control here is passive only, so it depends on the tip seal, not electronics.
FiiO /JadeAudio JT1: Who It's For
The JT1 is a different animal entirely. It's an over-ear, closed-back headphone built around a 50mm high-performance dynamic driver with a diaphragm made from a PEK+PU+aluminum foil multi-layer high-molecular composite. That layering is the interesting part: the aluminum foil adds stiffness for accurate high-frequency response, while the polymer layers keep it flexible enough to move cleanly. FiiO pairs it with high-performance N52 magnets and a high-tension CCAW voice coil, a combination aimed at fast transient response, low distortion and a natural, accurate tone.
FiiO describes the sound as combining low-frequency volume with high resolution and a wide, accurate sound field, and says it suits pop, vocal and folk material. The closed cavity design is the mechanical reason the bass gets reinforced: sealing the cup around your ear traps low-frequency energy and blocks some outside noise at the same time. That's a meaningful difference from an open design if you work near a fan, a laptop or a noisy room.
Driving it is not a problem. Impedance is 32Ω, which the brand says is easy to power even from a low-power front end — a phone, a laptop jack or a basic dongle should be enough to get usable volume. The 3.5mm wired connection keeps things simple. The headband is adjustable and stretchable, and the ear cushions are soft and padded with memory foam and fabric, so you can angle the cups to sit the way you want.
Side-by-Side: Which Should You Choose?
• Best for bass weight and impact → Linsoul 7Hz. The Zero:2 adds about 3dB of low end over the original Zero, and the dual-cavity driver is built around harder-hitting bass.
• Best for soundstage and "big" presentation → FiiO /JadeAudio JT1. A 50mm driver in a closed over-ear cup is simply a larger acoustic space than a 10mm IEM.
• Best for portability → Linsoul 7Hz. In-ear, small, and easy to pocket between commutes.
• Best for long desk sessions → FiiO /JadeAudio JT1. Adjustable headband, memory foam and fabric cushions, over-ear comfort rather than an in-canal seal.
• Best for calls and gaming out of the box → FiiO /JadeAudio JT1. It ships with an inline microphone cable for voice communication and music control.
• Best for cable longevity and swapping → Linsoul 7Hz. The removable OFC silver-plated coaxial cable is replaceable if it fails.
• Best for isolation without electronics → FiiO /JadeAudio JT1. The closed-cavity over-ear design blocks more outside sound than a passive in-ear seal.
• Best for easy drive from a phone or laptop → Both. The JT1 is 32Ω, and the Zero:2 is a single dynamic IEM, so neither demands serious amplification.
• Best for plugging into a modern phone with a mic → Linsoul 7Hz. There's a Type-C mic variant, which sidesteps the headphone jack problem entirely.
In my opinion, the FiiO /JadeAudio JT1 is the one I'd buy if I could only own one of these. The 50mm driver, the closed over-ear design, the 32Ω impedance and the bundled inline mic cable make it the more versatile tool: music, monitoring, calls and gaming all work without adding accessories. I'd point you to the Linsoul 7Hz Zero:2 instead if your priority is a compact, balanced-then-bass-boosted IEM you can carry everywhere and re-cable if needed. Neither is objectively better — they solve different problems. Check the current price on Amazon before you commit, since the value case shifts with whatever each one costs today.
FAQ
It ships with an inline microphone cable that FiiO says supports calls, music control and gaming communication, alongside a detachable dual TRS cable. You can choose which cable to use depending on whether you need a mic.
Probably not. The JT1's impedance is 32Ω and FiiO states it performs well even from a low-power front end. The Zero:2 is a single dynamic IEM, so a phone or laptop jack is generally enough.
I'd take the Linsoul 7Hz Zero:2 for commuting because it's an in-ear design you can pocket. The JT1 is an over-ear headphone with no noise cancellation, so it's better suited to a desk than a train.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.