Carbon-negative chemistry fails in practice for a specific reason: the catalysts that are efficient are not selective, and the catalysts that are selective are not durable or easy to engineer. Inorganic catalysts harvest energy well and can be tuned freely, but require high temperature, high pressure, large overpotentials, or extreme pH — conditions that make them impractical to deploy where waste carbon actually is. Biological catalysts operate under mild conditions with near-single-product selectivity, but cannot capture energy efficiently on their own.
The LIMES Lab @ Sungkyunkwan University treats these as complementary failures, and the interface between the two classes of catalyst as the central engineering problem. We couple semiconductor and microporous materials directly to microbial and enzymatic catalysts, then design the reactors that let those living materials run on real waste streams under ambient conditions.
By integrating materials chemistry, electrochemistry, microbiology, and reactor engineering, we take a multidisciplinary approach centered on three thrusts.
Photoelectrochemical CO₂ reduction is limited by the voltage sunlight can supply, and inorganic catalysts consume most of that budget in overpotential. We interface silicon nanowire photoelectrodes directly with CO₂-fixing microorganisms, which operate at far lower overpotential and produce multicarbon products with near-single-product selectivity. Pairing the CO₂-reducing photocathode with glycerol oxidation instead of oxygen evolution lowers the thermodynamic burden enough for the full device to run bias-free.
We are extending this approach beyond purified CO₂ feedstocks to dissolved inorganic carbon in seawater — an abundant, largely untapped carbon source that conventional inorganic catalysts cannot access directly, but that salt-tolerant biological catalysts can.
Photochemical diode device architecture. From Kim et al., Nature Catalysis 7, 977-986 (2024).
Hybrid catalytic systems succeed or fail at the boundary between the two catalysts. Electrons must cross it efficiently, the two catalysts must survive each other's operating conditions, and reactive intermediates must transfer without escaping or poisoning either side.
We treat that boundary as the primary design object rather than an afterthought: engineering nanostructured surfaces for cell attachment and charge transfer, quantifying interfacial charge-transfer resistance and biofilm behavior electrochemically, and designing chemical environments where a mineral catalyst and a protein catalyst coexist without deactivating one another.
Dual pathways of electron transfer at S.ovata/Si interface
A hybrid catalyst that works in a vial does not work in a reactor by default. Gas-phase substrates, aqueous biological catalysts, and solid inorganic catalysts each want a different phase, and forcing them into one compartment is what kills real systems. In our tandem system for methane valorization, separating an inorganic catalyst and an enzyme across a hydrophobic–hydrophilic support both protects the inorganic catalyst from deactivation and raises productivity 18-fold — the same principle we are now applying to CO₂ conversion systems. We test on unpurified waste streams, since a system that requires clean feedstock has not solved the problem it claims to solve.
Q1. Can the same biohybrid CO2 conversion strategy reach beyond purified gas feedstocks to dissolved carbon in seawater and industrial effluent?
Q2. How do we design an interface that lets a semiconductor and a living cell exchange electrons efficiently, and keeps doing so for a thousand hours?
Q3. Can two catalysts that need different environments share one reactor? An enzyme works in water, but mixing it with a zeolite in one pot deactivates the zeolite. We design reactors that give each catalyst its own phase while keeping them coupled as one system.