Things you need to know about setup of S9 ASIC miner
S9 ASIC miner is the current top miner on the market. For the S9 1275 watt of power requires depending on the power available, there are different options you have either you can use 110v PSUs such as gold rated 1000 watt PSU and a 650 watt PSU to power the miner. Connect PSUs to the S9 using PCIe cable connections. If it is once connected then you will connect an Ethernet cable to the miner itself. Visit and take the help S9 ASIC miner to know more about ASIC mining.
Next step is to turn on your PSU and the miner will be power up from there. Then you need to get on a computer or mobile device that is connected to the same network as the miner. Enter miners IP address. This will take you to the first screen to login to the miner. When you log in you will find the username and the password and after the login, you will able to see system overview. You can also change the password, for that you need to go Admin tab. If you are looking to add information to the mining pool you want to mine, visit Miner configuration tab. If you want to know more about S9 ASIC miner then take help from us.
When you save all settings you will able to start mining in your pool. To show hash rate on your pool it will take a couple of minutes to up to an hour. After all, you need to go on Miner status page and it will help you to show how your miner is performing. If you also go to the Bitcoin mining pool you can also see your status. Now you are mining Bitcoin. Take the help of S9 ASIC miner and have full information about this.