We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-09 · 8 min read · Independent comparison
If you want a plug-and-play stereo speaker set for your desk or laptop with a private headphone jack and no software to install, choose LENRUE Computer Speakers; if you need a compact in-ear monitor amplifier that takes a stereo XLR/TRS source and drives your own headphones, choose Nexilunual P2.
These two are not really rivals in the usual sense. One is a pair of powered desktop speakers. The other is a personal headphone amp built for in-ear monitors. What they share is the stereo thread: both deal in two-channel audio, and both end up feeding sound to your ears. If you are shopping for a gym setup and want a stereo signal you can actually monitor while you train, that distinction matters. Let me break down where each one wins.
• LENRUE Computer Speakers — biggest strength: True stereo speaker pair with 10W total output, a 3.5mm headphone jack, rotary volume knob, touch-controlled lights, and USB-C to USB adapter for plug-and-play across Windows, Chrome OS, Linux and UNIX.
• LENRUE Computer Speakers — biggest trade-off: It is corded electric only, so it is tethered to a USB port for power and an AUX jack for audio — no battery, no portability.
• Nexilunual P2 — biggest strength: A dedicated in-ear monitor amplifier with XLR/TRS input, 3.5mm output, a stereo/mono switch and a DIP switch for tuning — it drives your existing headphones rather than making sound itself.
• Nexilunual P2 — biggest trade-off: It produces no sound on its own. Without a source and a set of in-ear monitors or headphones, it does nothing.
• Who each is for: LENRUE for anyone who wants stereo sound straight out of a laptop or desktop with a private-listening option; Nexilunual P2 for someone who already owns in-ear monitors and wants a small stereo amp to feed them.
The LENRUE set is a stereo desktop speaker pair, and it is honest about what that means. Two channels, 10 watts total, driven by 5×2W drivers, with a surround-sound presentation that spreads audio across your desk rather than firing it at one point. The 360° stereo framing suggests the sound is meant to fill a small room or a workstation, not to be surgically aimed. For a monitor, a laptop, a PC or a desktop tower, that is exactly the right behavior.
What I like about the design is how much of it is about removing friction. The USB-C to USB adapter means no drivers — you plug in, you power on, you have audio. The rotary knob gives you physical volume control instead of hunting through software sliders. There is a headphone output jack, which is the feature that ties this most directly to the stereo-headphones angle: you can run the speakers for casual listening and then plug in headphones for privacy without touching a single setting. Late-night classes, meetings, movies, YouTube surfing — that jack is the difference between bothering the household and not.
The lights are a genuine design choice, not an afterthought. A touch button cycles them on and off, and a separate light control lets you kill them entirely if you would rather work in the dark without a glow. The cable between the two speakers runs 37 inches, which is enough to sit them on either side of a monitor. Physically they are modest — about 6.89 inches tall, 3.55 inches deep, 3.07 inches wide, 1.3 pounds, plastic enclosure — so they fit under a monitor riser or beside a laptop without drama.
Nexilunual P2: Who It's For
The Nexilunual P2 is a different category entirely, and I want to be straight about that so nobody buys the wrong thing. This is an in-ear monitor amplifier. It does not contain speakers. It takes an input — XLR or TRS — and outputs to a 3.5mm jack, and it amplifies whatever you plug into it. If you own a set of in-ear monitors or headphones, this is the box that makes them easier to drive from a pro-audio source. If you do not own any, this product has nothing to give you.
The feature set is aimed squarely at monitoring work. The stereo/mono switch matters more than it looks: in a monitoring context you sometimes need to check how a mix collapses to a single channel, and flipping that on the unit is faster than re-routing anything. The DIP switch gives you a small amount of configuration at the hardware level, which is the kind of thing people who work with IEMs tend to appreciate. The seven-color breathing light is cosmetic, but it is a nice touch on a dark stage or a dim desk.
Build-wise, the sheet is thin: white, in-ear fit type, one unit in the box, a one-year warranty. There is no weight, no dimensions, no output power figure, no battery listed. So I will not pretend to know how hard it drives a load or how long it runs — those numbers are not published, and I am not going to invent them. What I can say is that the P2 is a focused tool. It is not a consumer gadget that happens to do audio; it is a piece of monitoring gear.
Who should buy it: someone with in-ear monitors who needs a small stereo amp with XLR/TRS in and 3.5mm out, plus a mono check. Who should skip it: anyone who wants to hear music out loud, anyone without headphones to plug in, and anyone expecting a self-contained listening device. In my opinion, this is a specialist purchase, and it should be treated like one.
• Best for hearing sound out loud → LENRUE Computer Speakers. The P2 cannot make noise without a connected headphone or IEM.
• Best for private stereo listening at a desk → LENRUE Computer Speakers. The 3.5mm headphone jack is built in and noiseless by design.
• Best for driving in-ear monitors from a pro source → Nexilunual P2. XLR/TRS input with a 3.5mm output is exactly that job.
• Best for a stereo/mono monitoring check → Nexilunual P2. The switch is on the unit, which is where you want it.
• Best for setup simplicity → LENRUE Computer Speakers. USB-C to USB adapter, no drivers, plug and play.
• Best for a gym or training setup → depends on your chain. For a gym you want either light speakers you can leave at home and a headphone jack for private sessions, or a compact amp like the P2 feeding in-ear monitors. Neither is a wearable, so if you are hunting for the best sports earbuds for gym, neither of these is that product — the P2 is the piece that would sit between your source and those earbuds.
• Best for a fixed desktop or laptop station → LENRUE Computer Speakers. Corded USB power and AUX audio suit a permanent spot.
• Best for headphone-first listeners who already own gear → Nexilunual P2. It assumes you have the headphones; it just makes them easier to feed.
If you are the sort of shopper comparing over ear headphones for gym and a small amp to drive them, the P2 is the relevant half of this pair. If you are looking for the best sweat resistant sleep headphones for gym sessions and a way to keep audio off the room, the LENRUE headphone jack covers the privacy half at the desk. Different jobs, same stereo theme.
For most people reading a comparison like this, I would buy the LENRUE Computer Speakers. It is the complete product: it makes stereo sound, it plugs into almost anything without drivers, it has physical volume control, and the headphone jack gives you a private mode without extra hardware. For a gym-focused buyer who already owns in-ear monitors and wants a compact amp to drive them, I would buy the Nexilunual P2 instead — but only if you understand it is a link in the chain, not the whole chain. In my opinion, if you need sound out of the box, LENRUE is the pick; if you need to amplify headphones you already own, P2 is the pick.
FAQ
how to wireless headphones work
how to connect wireless headphones
You normally pair them once, then they reconnect automatically when both devices are on and in range. That process does not apply to these two products, because both are wired. The LENRUE connects via USB for power plus an AUX plug for audio, and the P2 connects your source to its XLR/TRS input and your headphones to its 3.5mm output.
how to use wireless headphones
You charge them, pair them, and wear them — no cable to the source. If you are comparing that experience to what is on this page, note the trade: the LENRUE gives you a corded stereo desk setup with a headphone jack for privacy, and the P2 gives you a corded amp for in-ear monitors. Both are wired by design, and both trade portability for a stable, driver-free connection.
how to connect wireless headphones to a laptop
On a laptop you would enable Bluetooth and pair from the sound settings. These products skip that entirely. The LENRUE ships with a USB-C to USB adapter so it works on laptops without any driver installation, and the P2 needs a cable from your audio source into its XLR or TRS input. If you want zero pairing hassle, the wired route is the simpler one — and if price is the deciding factor, check the current price on Amazon for either.
• 4Gamers Panther Gaming Headset vs Koiiko One Ear Headset
• LC-dolida Sleep Headphones vs Fisher Pro Active Noise
• keephifi KZ EDX Pro vs CVJ Jemine IEM: High Impedance Studio
• Sennheiser CX Plus In-Ear vs Corsair Void v2
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.