LAMP 4PPM에서 새로운 "연구원 및 대학원생"을 모집합니다.
received the M.S degrees in Dept. of Chemistry Education and the Ph. D. degrees in Printed Electronics from Sunchon National University, Korea, in 2009 and 2014, respectively. In 2018, he was an Assistant Professor at the Institute of Innovative Research, Tokyo Institute of Technology, Japan. Currently, he is a Research Professor in Quantum Biophysics at Sungkyunkwan University, Korea. He focused on printed sensors, organic transistors, TFT simulation, and electrochemistry.
isinu7@skku.edu
Dr. Hye-jin PARK received her M.S. and Ph.D. degrees in Department of Printed Electronics Engineering from Sunchon National University, Suncheon, South Korea, in 2012 and 2019, respectively. Dr. Park’s research interests including flexible, large area and low-cost electronic devices based on printed electronics technology, such as, the ink materials and process development of fully R2R gravure printed TFT device and their display and sensor applications. Her past work primarily concentrated on developing fully R2R gravure printed TFT active matrix for large area digital signage and R2R gravure printed NFC tags as a platform for RF e-sensor based smart packaging.
hyejinpark@skku.edu
Received the B.S. degree in Dept. of Engineering in Electronics and Communication from Kantipur City College (KCC), Purbanchal University, Nepal in 2011. In February 2023, he completed doctorate degree in Intelligent Precision Healthcare from Sungkyunkwan University, South Korea. His current research field includes realization of a Sustainable High-Throughput Foundry utilizing Roll-to-Roll gravure printing to fabricate printed processors and microcontrollers on flexible substrate.
sajjanprj@gmail.com
Recevied his M.Sc in Printed Electronics Engineering from Sunchon National University (2019), South Korea. In 2015 he received his undergraduate degree in Electronic and Communication Engineering. At present, he is a graduate student for integrated (master &PhD) in Biophysics, Sungkyunkwan University, South Korea. He is focused on the development and design of printed devices and interfacing printed sensors on flexible substrates. He past works mostly focuses on schematic and PCB designs for embedded systems, communication protocol like RS-485, SDI, RS-232, 4-20 mA loop, GSM and Iridium communication link. And his current interest is focused in NFC applications.
kieran.shrestha@gmail.com
received a bachelor’s degree in electronics and communication engineering from Kathmandu Engineering College (KEC), Tribhuvan University, Nepal. Currently, he is a graduate student for integrated (master &PhD) in Biophysics, Sungkyunkwan University, South Korea. His current research focused on making Rectifier to harvest the wireless DC power from the NFC signal of smartphones for biosensors.
sagarman38@gmail.com
Recevied her M.Sc in Chemistry from Qilu University of Technology (2023), China. At present, she is a PhD student in IPHC, Sungkyunkwan University, South Korea. Her current research focused on Electrothermal PCR – Cyclic Voltammetry Tags.
zhangmeng301@gmail.com
received the B.S. degree in Dept. of Chemical Engineering from Sunchon National University, Suncheon, South Korea, in 2019. Currently, she is a graduate student for integrated (master &PhD) in Biophysics, Sungkyunkwan University, South Korea. Her current research focused on ink formulation for R2R, printed RFID tags, and TFT.
parky0503@naver.com
Received the B.S. degrees in Dept. of Chemical Engineering, from Sunchon National University, Suncheon, South Korea, in 2020. At present, she is a graduate student for integrated (master &PhD) in Biophysics, Sungkyunkwan University, South Korea. Her current research focused on development of ultra-fast and high-throughput PCR platform using photothermal conversion effect, electrochemical-based bacteria detection sensor.
tjdfud2371@naver.com
My field of research primarily centers on exosomes and its applications in regenerative medicine, immunology, and cancer. My objective is to be able to diagnose and treat diseases non-invasively, while being effective and cost friendly. I hope to provide the patient an alternative to traditional medical procedures and treatments, and enhance their quality of life through innovative exosomal techniques.
gabrielamf@g.skku.edu
Received the B.S degree in department of General medicine and surgery From RWANDA,university of RWANDA .
At present,I am graduate student for integrated ( Master &PHD) in Intelligent precision Healthcare convergence ,Sungkyunkwan university, South Korea.
My current research field includes restore aging with young mitochondria transplantation.
mercianne15@gmail.com
Received the B.S. degree in Dept. of Chemical Engineering from TonDucThang University (TDT), Vietnam, in 2019. At present, he is an integrated (Master & Ph.D.) in Intelligent precision Healthcare convergence, Sungkyunkwan university, South Korea.
His current research focused on R2R Printed TFT active Matrix and TFT based sensor.
xple95@gmail.com
Recieved a M.S degree in industrial engineering from Sungkyunkwan university, korea in 2022
Currently, she is a Phd candidate at the Dept. Of intelligent precision healthcare convergance at Sungkyunkwan university
Her research is focused on printed electronics, Artificial intelligence and Data analyssis
anood.shakil@g.skku.edu
Received the B.S. degrees in Dept. of Physics, from Kyungpook National University.
wnstjd8253@naver.com
Breif Introduction: I completed my master's in chemistry from Vellore Institute of Technology (VIT), India. Currently, I am pursuing my PhD degree in chemical engineering from Sungkyunkwan University.
My current work focuses on printable electronics using Roll to Roll printing technology. My research is focused on semiconducting ink formulation, enabling printing of high performance Transistors.
rbenieljones@gmail.com
Received a bachelor’s degree in Mechanics of Automobile Engineering from Industrial Technical Institute (ITI),Cambodia,in2022.
At present, I am graduate student integrated (Master&Ph.D.) in Intelligent precision Healthcare convergence, Sungkyunkwan university, South Korea.
My current research focused on Inkjet printing.
sumdebora22@gmail.com
I received my Bachelor's degree in Electronics and Communication Engineering from Kathmandu Engineering College (KEC), Tribhuvan University, Nepal, in 2022. Currently, I am pursuing a Master's degree in Intelligent Precision Healthcare Convergence at Sungkyunkwan University, South Korea. My research focuses on the design and development of flexible electronics, particularly in NFC and TFTs, exploring roll-to-roll printing to create high-performance devices for real-time health monitoring and other applications.
Sharmapradipt@gmail.com
I hold a Bachelor's degree in Electronics and Communication Engineering from Kathmandu Engineering College (KEC), graduating in 2021. Currently, I am pursuing a Master's degree in Intelligent Precision Healthcare Convergence (IPHC) at Sungkyunkwan University (SKKU), Suwon, Korea.
ishwor@skku.edu