How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a hard travel case that protects a pair of Beats-style wireless headphones and keeps the cables together, choose L LTGEM Case; if you need actual studio headphones for mixing, monitoring and critical listening, choose SAMSON SR850B. These two products share a category page but nothing else — one is empty storage, the other is the instrument itself.
• L LTGEM Case — biggest strength: a hard EVA shell with a soft lining, a smooth heavy-duty zipper and an internal mesh pocket, sized at 7.7 x 6.3 x 3.5 inches to hold folding Beats-style headphones plus cables and a charger.
• L LTGEM Case — biggest trade-off: it is a case only. No headphones are included, and it fits a specific list of compatible models rather than everything.
• SAMSON SR850B — biggest strength: genuine studio hardware — 50 mm dynamic drivers with rare earth magnets, a semi-open back for stereo imaging, 10 Hz to 30 kHz frequency response and 32 ohm impedance that plays nicely with interfaces, mixers, laptops and phones.
• SAMSON SR850B — biggest trade-off: it is wired only, has no noise cancelling, and the semi-open design leaks sound both ways — you hear the room and the room hears you.
• Buy the L LTGEM Case if you already own a compatible headphone and want to stop throwing it loose into a backpack.
• Buy the SAMSON SR850B if you need a headphone to actually listen and work with.
The L LTGEM Case is a protective shell, not a listening device. Its job is narrow and it does that job with a specific set of materials: a hard ethylene vinyl acetate exterior, a soft interior lining, and a waterproof, shockproof, dustproof and semi-waterproof construction according to the manufacturer's own feature list. In practice that means a dropped backpack, a spilled drink on a desk or a dusty shelf is a non-event for whatever is zipped inside. The 7.7 x 6.3 x 3.5 inch footprint is compact enough to slide into a carry-on or a larger bag, and the hand strap makes it easy to carry on its own.
Inside, the layout is what sells it for most people. There is a mesh pocket with enough room for a charging cable, a wall adapter or a small dongle, so your headphone and its accessories travel as one unit instead of scattering across a bag. The zipper is described as smooth and strong, opening wide so you can lift the headphone out without fighting the case. The pattern is a plain solid black with a music theme, which keeps it neutral rather than loud.
Compatibility is the part to read carefully before buying. L LTGEM lists this case for Beats Studio Pro, Solo 4, Studio 3, Solo 3, Picun B8, BERIBES, JLab JBuds Lux ANC, TOZO HT2, Wentronic Y01, Skullcandy Crusher Evo and Skullcandy Crusher ANC 2 wireless headphones. If your headphone is not on that list, do not assume it fits — the interior is molded around a folding over-ear shape and a 7.7 inch maximum compatible device size.
Who should skip it? Anyone who does not own a compatible headphone, and anyone expecting a case to improve sound. It cannot. It also is not a hard-shell flight case for large professional studio headphones — it is sized for the compact folding wireless models above. And note the manufacturer weighs it at roughly 0.19 kg, so it adds almost nothing to your bag. If you want the case, check the current price on Amazon with the button on this page, since case pricing moves around more than headphone pricing does.
The SAMSON SR850B is the opposite kind of purchase: a tool for people who make or examine audio rather than store it. The headline spec is the driver — a 50 mm dynamic driver with rare earth magnets. Big drivers move more air, and combined with a rated frequency response of 10 Hz to 30 kHz and 98 dB sensitivity, the SR850B is built to reproduce deep bass, clear mids and crisp highs without needing a headphone amp to get loud. At 32 ohm impedance it is easy to drive from an audio interface, a mixer, a laptop headphone jack or even a phone with the right adapter.
The semi-open back is the design decision that defines the listening experience. Unlike a closed-back headphone that seals you off, the SR850B lets air move through the cups. The practical result is a wider, more spacious soundstage and better stereo imaging — which is exactly why semi-open and open designs show up in mixing and monitoring work. You hear reverb tails and panning placements more naturally, and the sound feels less boxed into your skull. The trade-off is real and worth stating plainly: sound leaks out, and outside noise leaks in. On a loud train or in a shared office, that is a disadvantage. In a quiet room where you are checking a mix, it is an advantage.
Comfort is clearly a priority in the design. The SR850B is an over-ear headphone with velour ear cushions and a self-adjusting headband, which together spread pressure instead of clamping down on one spot. Velour breathes better than pleather over a long session, and the self-adjusting band means you are not fiddling with a slider every time you put them on. For anyone doing multi-hour work — tracking, editing, or just a long listening session — that matters more than most spec sheets admit.
Included in the box is the headphone itself with a 3.5 mm plug and a 1/4 inch gold-plated adapter, so it works with both consumer jacks and the larger outputs found on interfaces and mixers. Samson backs it with a 2 year manufacturer warranty. What it does not have: no Bluetooth, no active noise cancelling, no microphone mentioned. This is a wired, passive headphone. If wireless freedom is non-negotiable, this is not your product.
• Best for protecting a headphone you already own → L LTGEM Case. It is the only one of the two that is a case at all.
• Best for actual studio work → SAMSON SR850B. 50 mm drivers, semi-open imaging and a 10 Hz–30 kHz range are studio-relevant specs; a zipper is not.
• Best for travel with a folding wireless headphone → L LTGEM Case. The hand strap, compact 7.7 x 6.3 x 3.5 inch body and mesh accessory pocket are built for movement.
• Best for long listening sessions → SAMSON SR850B. Velour cushions and a self-adjusting headband are designed to reduce fatigue over hours.
• Best for quiet-room critical listening → SAMSON SR850B. The semi-open back widens the soundstage, which is the point of the design.
• Best for noisy environments → neither, honestly. The SR850B leaks and lets noise in; the L LTGEM Case makes no sound at all.
• Best for cable and accessory organization → L LTGEM Case. The internal mesh pocket is the feature that keeps chargers and adapters from vanishing.
• Best for plug-and-play with lots of gear → SAMSON SR850B. 32 ohm impedance plus a 3.5 mm plug and 1/4 inch gold-plated adapter covers interfaces, mixers, laptops and mobile devices.
If you asked me to pick one, I would buy the SAMSON SR850B — but only because a headphone is a thing you use and a case is a thing you store. In my opinion the SR850B gives you far more for the money in terms of what it actually does: real drivers, real imaging, real comfort for long sessions, and a warranty behind it. The L LTGEM Case is a sensible, well-organized purchase if you already own one of the compatible Beats-family headphones and keep losing the cable. It is just a different category of product. Buy the case to protect a headphone; buy the SR850B to hear one.
how to connect studio headphones
The SAMSON SR850B is a wired headphone, so connection is physical, not wireless. Plug the 3.5 mm jack into a laptop, phone or interface, or slide on the included 1/4 inch gold-plated adapter for a mixer or audio interface output. There is no pairing step and no battery to charge.
how to test studio headphones
Play material you know extremely well and listen for balance across the range — the SR850B is rated 10 Hz to 30 kHz, so check that bass is deep without smothering the mids and that highs stay crisp. Then check channel placement: a semi-open design like this one should place instruments clearly left, right and center. Finally, wear them for an extended period to judge the velour cushions and self-adjusting headband.
how to bluetooth studio headphones
You cannot add Bluetooth to the SR850B — it has no wireless connectivity and no noise cancelling. If you want wireless, you need a separate Bluetooth transmitter paired with a wired headphone, or a different headphone entirely. The L LTGEM Case, for the record, is a case and has no electronics either.
does the L LTGEM Case come with headphones
No. The listing is explicit that it is the case only — the headphone and accessories are not included. It is a hard EVA shell with a soft lining, a mesh accessory pocket and a hand strap, sized at 7.7 x 6.3 x 3.5 inches for the compatible Beats-style models it lists.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: EARLA TEC Replacement Audio Cable vs L LTGEM Headphones Case Bag, L LTGEM Case vs wocdwocd Cute Cartoon: Headphones for Travel, CozyPhones Toddler Headphones vs L LTGEM Headphone Headset Case