PAPERS

I. Peer Reviewed Journal Papers

Sang Min Lee, Sang-Youn Park, Un Bong Baek, Byoung-Ho Choi (2023) “Evaluation of the residual fatigue lifetime of a semi-elliptical crack of a Low-Alloy steel pressure vessel under High-Pressure gaseous hydrogen”, International Journal of Fatigue, Volume 176, 107875

Sang-Youn Park, Anudeep Mallarapu, Jaeyoung Lim, Shriram Santhanagopalan, Yongha Han, Byoung-Ho Choi (2023) “Observation and modeling of the thermal runaway of high-capacity pouch cells due to an internal short induced by an indenter ”, Journal of Energy Storage, Volume 72, 108518

Abdulla Almomani, Abdel-Hamid I. Mourad, Suleyman Deveci, Jung-Wook Wee and Byoung-Ho Choi (2023) “Recent advances in slow crack growth modeling of polyethylene materials”, Materials and Design, Volume 227, 111720

Jung-Wook Wee, Ilhyun Kim and Byoung-Ho Choi (2023) “Development of mechanochemical degradation induced slow crack growth model for high density polyethylene in cracked round bar specimen”, Journal of Mechanical Science and Technology 37 (2)719~726.

Hee Min Yang, Sunghwan Jo, Jun Ho Oh, Byoung-Ho Choi, Ju Yeon Woo and Chang-Soo Han (2022) “Strong and tough nacre-inspired graphene oxide composite with hierarchically similar structure”, ACS Nano, in press.

Sang Min Lee, Sang-Youn Park and Byoung-Ho Choi* (2022) “Application of Domain-adaptive Convolutional Variational Autoencoder for Stress-state Prediction”, Knowledge-Based Systems, 248, 108827.

Jung-Wook Wee, Alexander Chudnovsky and Byoung-Ho Choi* (2022) “Fundamental Modeling of Multiple Crack Initiation in Polymer Pipes under Oxidative Environment”, International Journal of Engineering Science, 176, 103686.

Jun-Young Yoon, Seung-Gu Kang, Dong-Hyeon Kim, Hyun-Tae Kim and Byoung-Ho Choi* (2022) “Design of the New Power Generation System with Energy Recovery for Railway Tracks”, Transactions of KSME C, 10(1), 1-8. (in Korean)

Byeong-Lyul Choi, Jae Kap Jung, Un Bong Baek and Byoung-Ho Choi* (2022) “Effect of Functional Fillers on Tribological Characteristics of Acrylonitrile Butadiene Rubber after High-Pressure Hydrogen Exposures”, Polymers, 14, 861.

Jung-Wook Wee, Min-Seok Choi, Hong-Chul Hyun, Ji-Hoon Hwang and Byoung-Ho Choi*(2021) “Observation and modeling of the effects of temperature and UV irradiance on weathering-induced degradation of PC/ABS blend”, International Journal of Precision Engineering and Manufacturing – Green Technology, in press.

Byunghyun Kang, Cheol Choi, Daeun Sung, Seongho Yoon* and Byoung-Ho Choi* (2021) “Experimental study on the factors affecting squeak noise occurrence in automotive suspension bushings”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Accepted.

Jungsub Lee, Sang Youn Park and Byoung-Ho Choi* (2021) “Evaluation of Fatigue Characteristics of Aluminum Alloys and Mechanical Components Using Extreme Value Statistics and C-specimens”, Metals, 11, 1915.

Sung Wook Moon, Jiae Seo, Ji-Hun Seo and Byoung-Ho Choi* (2021) “Scratch Properties of Clear Coat for Automotive Coating Com-prising Molecular Necklace Crosslinkers with Silane Functional Groups for Various Environmental Factors”, Polymers, 13, 3933.

Min-Seok Choi, Jin Hyoung Lee and Byoung-Ho Choi* (2021) “Mechanical and fracture properties of poly(ethylene terephthalate) with glycol/carbon nanotube nanocomposite films under accelerated weathering conditions”, Journal of Mechanical Science and Technology, 35(9). 3837-3845.

Gyeong-Beom Lee, Seung Hak Song, Myeong-Woo Lee, Yun-Jae Kim and Byoung-Ho Choi* (2021) “Characterization of physical and mechanical properties of Al2O3-doped ZnO (AZO) thin films deposited on transparent polyimide supports with various ALD process parameters”, Applied Surface Science, 535, 147731.

Seung Hak Song, In-Ha Lee, Seungpyo Lee and Byoung-Ho Choi* (2020) “A Study on Fatigue Characteristics of S55Cr Carbon Steels with Induction Surface Hardening for Automotive Ball Bearings”, Transactions of KSAE, 28(12), 891-896. (in Korean)

Bok-Lok Choi, Seong-Ki Hong and Byoung-Ho Choi* (2020) “Prediction of sealing performance of V-coupling of turbocharger housing using analytical and finite element analysis”, International Journal of Automotive Technology, 21, 1587-1595.

Junmo Koo, Sangmin Lee, Junmo Kim, Dong Hwan Kim, Byoung-Ho Choi, Taek-Soo Kim and Joon Hyung Shim* (2020) “Mechanical Properties of Free-standing Alumina Thin Film Prepared by Atomic Layer Deposition”, Scripta Materialia, 187, 256-261

Jung-Wook Wee, Sang-Youn Park and Byoung-Ho Choi* (2020) “Modeling and application of discontinuous slow crack growth behaviors of high-density polyethylene pipe with various geometries and loading conditions”, Engineering Fracture Mechanics, 236, 107205.

Seung Hak Song, Sung-Tae Hwang and Byoung-Ho Choi* (2020) ” Effect of zincone ratio on the reliability of aluminum-doped zinc oxide-zincone multilayer thin films grown on a flexible substrate using atomic/molecular layer deposition hybrid techniques”, Thin Solid Films, 706, 138082.

Jung-Wook Wee, Ilhyun Kim, Min-Seok Choi, Sang-Kyu Park, and Byoung-Ho Choi* (2020) “Characterization and modeling of slow crack growth behaviors of defective high-density polyethylene pipes using stiff-constant K specimen”, Polymer Testing, 86, 106499.

Sang-Youn Park, Jungsub Lee, Jong-Tae Heo, Gyeong Beom Lee, Hyun Hui Kim, Byoung-Ho Choi* (2020) “Assessment of fatigue lifetime and characterization of fatigue crack behavior of aluminum scroll compressor using C-specimen”, Applied Sciences, 10, 3226.

Jung-Wook Wee and Byoung-Ho Choi* (2020) “Stochastic study on effects of material and physical parameters on discontinuous slow crack growth behavior of HDPE using crack layer theory”, International Journal of Solids and Structures, 195, 13-27.

Jung-Wook Wee, Alexander Chudnovsky and Byoung-Ho Choi* (2020) “Discontinuous slow crack growth modeling of semi-elliptical surface crack in high density polyethylene using crack layer theory”, International Journal of Solids and Structures, 185-186, 65-77.

Jiae Seo, Sung Wook Moon, Heemin Kang, Byoung-Ho Choi, Ji-Hun Seo (2019) “Foldable and extremely scratch-resistant hard coating materials from molecular necklace-like cross-linkers”, ACS Applied Materials & Interfaces, 11(30), pp. 27306-27317.

Jeong-Moo Lee, Jong-Sin Moon⁠, Dongchul Shim⁠, Byoung-Ho Choi* (2019) “Effect of glass fiber distributions on the mechanical and fracture behaviors of injection-molded glass fiber-filled polypropylene with 2-Hole Tension specimens”, Composites Science and Technology, 170, pp. 190-199.

Jong-Sin Moon and Byoung-Ho Choi* (2018) “Modeling and validation of the effects of processing parameters on the dimensional stability of an injection-molded polypropylene plate”, Journal of Mechanical Science and Technology, 32(12), pp. 1-8.

Myung Hyun Kim, Sung Han Kim, Byung Sun Kim, Jung-Wook Wee and Byoung-Ho Choi* (2018) “Characterization of injection-molded high-strength/high-stiffness thermoplastic hybrid materials containing thermotropic liquid crystal polymer (LCP), polyphenylene sulfide (PPS) with carbon fibers”, Composite Science and Technology, 168, pp. 272-278.

Jung-Wook Wee, Min-Seok Choi, Hong-Chul Hyun, Ji-Hoon Hwang and Byoung-Ho Choi* (2018) “Effect of Weathering-Induced Degradation on the Fracture and Fatigue Characteristics of Injection-Molded Polypropylene/Talc Composites”, International Journal of Fatigue, 117, pp. 111-120.

Hyun Soo Park, Il-Hyun Kim and Byoung-Ho Choi* (2018) “Variation of Fracture Characteristics of Hydroxyl-Terminated Polybutadiene(HTPB)-Based Solid Propellants under Thermal Aging”, Transactions of KSME, 42(5), pp. 477-484. (in Korean)

Changhoon Lee, Byunghyun Kang, Byoung-Ho Choi*, Jongho Lee and Kwanghee Lee (2017) “Observation and Characterization of Squeak Noises of Polymeric Materials for Automotive Interior Parts Under Field-Degradation”, Transactions of KSAE, 25(2), pp. 257-265. (in Korean)

Seung Hak Song, Myoung Youb Lee, Gyeong Beom Lee, and Byoung-Ho Choi* (2017) "Characterization of Al2O3 and ZnO multilayer thin films deposited by low temperature thermal atomic layer deposition on transparent polyimide."JVST A - Vacuum, Surfaces, and Films Vol. 35 No. 1 :

Jung-Wook Wee, and Byoung-Ho Choi. "Impact of material and physical parameters of the crack layer theory on slow crack growth behavior of high density polyethylene." Engineering Fracture Mechanics 175 (2017): 101-114.

Suk Won Park, Kiho Bae, Jun Woo Kim, Gyeong Beom Lee, Byoung-Ho Choi, Min Hwan Lee and Joon Hyung Shim (2016) “Chemical Protection of Polycarbonate Surfaces by Atomic Layer Deposition of Alumina with Oxygen Plasma Pretreatment”, Advanced Materials Interface, 3, 1600340.

Jung-Wook Wee, and Byoung-Ho Choi. "Prediction of discontinuous fatigue crack growth in high density polyethylene based on the crack layer theory with variable crack layer parameters." International Journal of Fatigue 92 (2016): 304-312.

Hye Yoon Lee, Young Geon Cho, Ji Young You, Byoung Ho Choi, Joon Yub Kim, Che-Wei Wu, Feng-Yu Chiang and Hoon Yub Kim* (2016) “Traction injury of the recurrent laryngeal nerve: Results of continuous intraoperative neuromonitoring in a swine model”, Head & Neck, 38(4), pp. 582-588.

Bok-Lok Choi and Byoung-Ho Choi* (2016) "Inealstic stress analysis and failure prediction of turbine housing under engine motoring test", Proceedings of the Institution of Mechanical Engineers Part D – Journal of Automobile Engineering, 230(6), pp. 855-863.

Jung-Wook Wee, and Byoung-Ho Choi. "Modeling of axisymmetric slow crack growth of high-density polyethylene with circular notched bar specimen using crack layer theory." International Journal of Solids and Structures 97 (2016): 189-199.

Jung-Wook Wee and Byoung-Ho Choi. (2015) “Modeling of stress corrosion crack growth and lifetime of pipe grade high density polyethylene by using crack layer theory”, Transaction of the KPVP, 11(2), pp. 45-50. (in Korean)

Sang-Youn Park, Jung-Sub Lee, Byoung-Ho Choi, Seung Ki Moon and ll-Hyuck Ahn (2015) “Modeling and Observation of Compressive Behaviors of Closed Cellular Structures using Central Voronoi Tessellation Concepts”, International Journal of Precision Engineering and Manufacturing, 16(12), pp. 2459-2465.

Bok-Lok Choi and Byoung-Ho Choi. (2015) "Numerical method for optimizing design variables of carbon-fiber-reinforced epoxy composite coil springs", Composites : part B, 82, pp 42-49.

Jung-Wook Wee, Yongjian Zhao, Byoung-Ho Choi* (2015) "Observation and modeling of environmental stress cracking behaviors of high crystalline polypropylene due to scent oils", Polymer Testing, 48, pp. 206-214

Jung-Wook Wee, Sang-Yoon Park, Byoung-Ho Choi* (2015) "Observation and understanding of scratch behaviors of glass fiber reinforced polycarbonate plates with various packing pressures during the injection molding process", Tribology International, 90, pp. 491-501

Byunghyun Kang, Sung-wook Moon, Jaeyoung Lim and Byoung-Ho Choi* (2015) "Observation and simulations of an impact on the automotive windshield using the time-dependent dynamic failure criterion", Proceedings of the Institution of Mechanical Engineering Part D-Journal of Automobile Engineering, 229(7), pp. 866

JM Lee, JS Moon, H Lee and Byung-Ho Choi* (2015) "Investigation of fatigue and mechanical properties of the pipe grade poly(vinyl chloride) using recycled scraps", Express Polymer Letters, 9(4), pp. 362

Gyeong Beom Lee, Gwon Deok Han, Joon Hyung Shim and Byoung-Ho Choi* (2015) "Characterization of ZnO film grown on polycarbonate by atomic layer deposition at low temperature", Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 33(1), pp 01A134

Jihun An, Chulhong Kim, Byoung-Ho Choi* and Jeong-Moo Lee (2014) "Characterization of Acrylonitrile-Butadiene-Styrene (ABS) Copolymer Blends With Foreign Polymers Using Fracture Mechanism Maps", Polymer Engineering & Science, 54(12), pp. 2791

Jihun An, Byung-Hyun Kang, Byoung-Ho Choi*, Hyoung-Jun Kim (2014) "Observation and evaluation of scratch characteristics of injection-molded poly(methylmethacrylate) toughened by acrylic rubbers" , Tribology International, 77, pp. 32-42

Gyeong Beom Lee, Seung Hak Song, Sung Wook Moon, Jun Woo Kim, Joon Hyung Shim, Byoung-Ho Choi and Young Moo Heo (2014) “Improvement in mechanical and barrier properties of polyethylene blown films using atomic layer deposition”, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 32(1), pp.01A126

Ilhyun Kim, Yongjian Zhao, Byoung-Ho Choi*, Ji Mi Lee, Ki-Soo Lee and Jeong-Moo Lee (2013) “Numerical Analysis of Asymmetric Fatigue Crack Growth Behaviors of Circular Notched Bar Specimen Resulting from Various Geometric Misalignments”, Engineering Fracture Mechanics, 108, pp. 50-64

Yongjian Zhao, Byoung-Ho Choi* and Alexander Chudnovsky (2013) “Characterization of the fatigue crack behavior of pipe grade polyethylene using circular notched specimens”, International Journal of Fatigue, 51, pp. 26-35

Jong-Sin Moon, Jeong-Moo Lee, Shi-Ho Lee and Byoung-Ho Choi* (2013) “Effect of Process Conditions on the Dart Impact Properties of Thin-Wall Injection-Molded Polycarbonate Plates”, Journal of Applied polymer science, 127(3), pp. 1466-1474

Gyeong Beom Lee, Kyung Sik Son, Suk Won Park, Joon Hyung Shim and Byoung-Ho Choi* (2013) “Low-temperature atomic layer deposition of Al2O3 on blown polyethylene films with plasma-treated surfaces”, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 31, pp. 01A129

Byoung-Ho Choi*, Hoang T. Pham, Zhenwen Zhou, Alexander Chudnovsky, Shaofu Wu (2012) “Investigation of the deformation and failure mechanism of organo-montmorillonite filled PP?TPO nanocomposites under uniaxial tension”, Composites: Part B, 43, pp. 3182-3191

Seong-Ho Jeon, Chin-Hun Chung, Heon-Mo Kim, Won-Hee Han, Eui-Il Chung and Byoung-Ho Choi* (2012) “Characterization of an Injection-Moulded Car Audio Chassis made of Polycarbonate/ Acrylonitrile-butadiene-styrene (PC/ABS)-Based Composite using Metal-Coated Carbon Fibers”, Proceedings of the Institution of Mechanical Engineers Part D - Journal of Automobile Engineering, 226, pp. 881-894

Wan No Yoon, Myung Soo Kang, Nam Kun Jung, Jun Sung Kim and Byoung-Ho Choi* (2012) “Failure Analysis of the Defect-Induced Blade Damage of a Compressor in the Gas Turbine of a Cogeneration Plant”, International Journal of Precision Engineering and Manufacturing, 13(5), pp. 717-722

Ki-Jeong Seo, Jeong-Moo Lee and Byoung-Ho Choi* (2012) “Investigation of the Effect of the Roughness Induced Crack Closure on the Fatigue Crack Propagation Behavior of Hot-rolled Steels under Mixed-mode Loading Conditions”, Materials Transactions, 53, pp. 264-269

Seong-Ho Jeon, Woo Chun Choi, Tae Hong Park, Heon-Mo Kim, Eui-Il Chung, Chi-Kyung Baek, Ki-Jeong Seo and Byoung-Ho Choi*. (2012) “Development of a New Light-weight Car Audio Using Polycarbonate/acrylonitrile-butadiene-styrene Copolymer Based Hybrid Composite Material”, International Journal of Precision Engineering and Manufacturing, 13, pp. 85-96

Bong-Chul Kim, Hyung-Jun Kim, Byoung-Ho Choi* and Ho-Sang Lee. (2011) “An Experimental Study of the Scratch Properties of Poly(methyl methacrylate) as a Function of the Concentration of Added Slip Agent”, Tribology International, 44, pp. 2035-2041

Byoung-Ho Choi*, Alexander Chudnovsky and Kalyan Sehanobish. (2011) “Modeling of Failure Mechanisms Using the True Stress-Strain Response of Polymeric Foam Materials”, Proceedia Engineering, 10, pp. 1613-1618

Seong Ho Jeon, Heon Mo Kim, Tae-Hong Park, Byoung-Ho Choi* and Woo Chun Choi. (2011) “Development of Polycarbonate/acrylonitrile-butadiene-styrene Copolymer Based Composites with Functional Fillers for Car Audio Chassis”, Materials & Design, 32, pp. 1306-1314

Byoung-Ho Choi* and Alexander Chudnovsky. (2011) “Variation of the Fatigue Lifetime with the Initial Notch Geometry of Circular Notched Bar Specimens”, Key Engineering Materials, 167, pp. 127-134

Byoung-Ho Choi* and Alexander Chudnovsky. (2011) “Observation and Modeling of Stress Corrosion Cracking in High Pressure Gas Pipe Steel”, Metallurgical and Materials Transactions A, accepted to publication.

Byoung-Ho Choi*, Mehmet Demirors, Rajen M. Patel, A. Willem deGroot, Kenneth W. Anderson, Victor Juarez. (2010) “Evaluation of the Tear Properties of Polyethylene Blown Films using the Essential Work of Fracture Concept”, Polymer, 51, pp. 2732-2739.

Ki-Jeong Seo, Byoung-Ho Choi*, Jeong-Moo Lee and Seung-Man Shin. (2010) “Investigation of the Mixed-Mode Fatigue Crack Growth of a Hot Rolled Steel Plate with a Circular Microdefect”, International Journal of Fatigue, 32, pp. 1190-1199

Byoung-Ho Choi*, Jeffrey Weinhold, David Reuschle, Mridula Kapur. (2009) “Modeling of the Fracture Mechanism of HDPE Subjected to Environmental Stress Crack Resistance (ESCR) Test”, Polymer Engineering and Science, 49(11), pp. 2085-2091.

Jeong-Moo Lee, Byoung-Ho Choi*, Jong-Shin Moon and Eon-Seok Lee. (2009) “Determination of the Tear Properties of Thermoplastic Polyester Elastomers (TPEEs) Using Essential Work of Fracture (EWF) Test Method”, Polymer Testing, 28, pp. 854-865.

Jeong-Moo Lee and Byoung-Ho Choi*. (2009) “Experimental Observation and Modeling of the Retardation of Fatigue Crack Propagation under the Combination of a Mixed-mode Single Overload”, International Journal of Fatigue, 31, pp. 1848-1857.

Byoung-Ho Choi*, Werner Balika, Alexander Chudnovsky, Gerald Pinter and Reinhold W. Lang. (2009) “Lifetime Prediction of the Fatigue Crack Growth of High Density Polyethylene Using Crack Layer Theory”, Polymer Engineering and Science, 49(7), pp. 1421-1428.

Byoung-Ho Choi*, Michael Cassiday and Pat Jimenez (2009). “Improvement of the Test Procedure of Environmental Stress Cracking Resistance (ESCR) Test of High Density Polyethylene”, Experimental Techniques, 33(4), pp. 43-51.

Byoung-Ho Choi*, Alexander Chudnovsky, Rajesh Paradkar, William Michie, Zhenwen Zhou and Pak-Meng Cham (2009). “Experimental and Theoretical Investigation of Stress Corrosion Crack (SCC) Growth of Polyethylene Pipes”, Polymer Degradation and Stability, 94, pp. 859-867.

Byoung-Ho Choi*, Alexander Chudnovsky and Kalyan Sehanobish (2007). “Stress Corrosion Cracking in Plastic Pipes: Observation and Modeling”, International Journal of Fracture, 145, pp. 81-88.

Byoung-Ho Choi* and Alexander Chudnovsky (2007). “Development and Application of Slow Crack Propagation of Polyethylene Based on Crack Layer Theory”, Key Engineering Materials, 345-346, pp. 489-492.

Byoung-Ho Choi*, Dong-Ho Joo and Sam-Hong Song (2007). “Application of Finite Element Analysis for the Prediction of the Fatigue Lifetime of Spot Welds with Triple SPCC Plates”, Key Engineering Materials, 345-346, pp. 1453-1456.

Byoung-Ho Choi*, Dong-Ho Joo and Sam-Hong Song (2007). “Observation and Prediction of Fatigue Behavior of Spot Welded Joints with Triple Thin Steel Plates Under Tensile-Shear Loading”, International Journal of Fatigue, 29(4), pp. 620-627.

Byoung-Ho Choi* and Sam-Hong Song (2005). “Prediction of Fatigue Limit of Induction Surface Hardened 1.05Cr-0.23Mo Steel Alloy Using Statistics with Extreme Values”, Journal of Materials Science, 40, pp. 5427-5433.

Byoung-Ho Choi*, Wen Zhou, Alexander Chudnovsky, Salvatore Stivala, Kalyan Sehanobish and Clive Bosnyak (2005). “Formation of Microcrack Network in Engineering Thermoplastic Resulting from Chemical Degradation”, International Journal of Solids and Structures, 42, pp. 681-695.

Sam-Hong Song and Byoung-Ho Choi* (2004) “Fatigue Strength Variation by Crack Initiation Origin of Surface Hardened Cr-Mo Steel Alloy”, Journal of Material Science, 39(1), pp. 335-338.

Sam-Hong Song and Byoung-Ho Choi* (2004) “Fatigue Characteristics and Fatigue Limit Prediction of the Induction Case Hardened Cr-Mo Steel”, Materials Science and Engineering, 361, pp. 15-22.

Byoung-Ho Choi* and Alexander Chudnovsky (2002), “Stress Corrosion Crack Growth in Pipe Grade Steels in Near Neutral pH Environment”, International Journal of Fracture, 116(3), pp. L43-L48..

Sam-Hong Song and Byoung-Ho Choi* (2001). “A Study on the Effect of Plastic Zone on the Fatigue Crack Propagation Behavior between Two Fatigue Cracks”, Experimental Mechanics, 41(3), pp. 225-231 (Invited). Also published In: Sam-Hong Song, Jun-Soo Bae and Byoung-Ho Choi (1998). “Crack propagation Behavior based on the Characteristic of the Interaction between Two Fatigue Cracks”, KSME International Journal, 12(2), pp. 191-198

Sam-Hong Song and Byoung-Ho Choi (2001). “A Study on the Characteristics and the Prediction of the Fatigue Strength of the Induction Surface Hardened Steel”, Transactions of Korean Society of Precision Engineering, 18(9), pp. 122-130. (written in Korean)

Sam-Hong Song, Byoung-Ho Choi and Jun-Soo Bae (2001). “An Experimental Study on the Fatigue Behavior and Stress Interaction of Arbitrarily Located Defects(II)”, Transactions of Korean Society of Precision Engineering, 18(1), pp. 201-212 (written in Korean)

Sam-Hong Song, Byoung-Ho Choi and Jun-Soo Bae (2000). “An Experimental Study on the Fatigue Behavior and Stress Interaction of Arbitrarily Located Defects(I)”, Transactions of Korean Society for Mechanical Engineers, 24(5), pp. 1288-1296. (written in Korean)

Sam-Hong Song, Jin-Ho Choi, Ki-Seok Kim and Byoung-Ho Choi* (1998). “Prediction Mod el for Crack Retardation Behavior Under Single Overload”, Transactions of the KSME, 22(10), pp. 1806-1812. (written in Korean)

II. International/Domestic Conference Papers (2005 - present)

102

Jung-Wook Wee and Byoung-Ho Choi* (2016) "Simulation of Fatigue Crack Growth of HDPE using Crack Layer Theory; Efect of Loading Frequency", SPE/ANTEC, U.S.A

101

Jung-Wook Wee and Byoung-Ho Choi* (2016) "Parametric study of the crack growth behavior of high density polyethylene under the combination of mechanical and oxidative degradations " Proceedings of ECF 21, Italy

100

Jung-Wook Wee and Byoung-Ho Choi* (2016) "Construction and Evaluation of Green's Function for Stress Intensity Factor and Crack Openness of Annular Notch Specimens" Proceedings of KSME Spring Conference 2016 korea

Seung Hak Song, GyeongBeom Lee, Myungwoo Lee and Byoung-Ho Choi* (2016) "Surface Characterization of Multi-Layer Al2O3 / ZnO Thin Film Deposited on Transparent Polyimide Film Using Atomic Layer Deposition", ALD2016/American Vacuum Society, Ireland

Byung-hyun Kang, Changhun Lee and Byoung-Ho Choi* (2016) "Evaluation of Squeak Noise due to the Surface Degradation of Automobile Polymeric Materials", Proceedings of The 6th East Aasia Mechanical&Aerospace Engineering Conference, Taiwan

Il-Hyun Kim, Yongjian Zhao and Byoung-Ho Choi* (2016) "Development of Lab-Scale Rapid Crack Propagation(RCP) Test for Pressurized Plastic Pipes", Proceedings of The 6th East Aasia Mechanical&Aerospace Engineering Conference, Taiwan

GyeongBeom Lee, Myungwoo Lee, Yun-Jae Kim and Byoung-Ho Choi* (2015) "A Investigation of Adhesion and Mechanical Property of AZO Electrode Deposited on Transparent Polyimide Using ALD Process", Proceedings of KSME Fall Conference 2015 Korea

Seung Hak Song, In-Ha Lee and Byoung-Ho Choi* (2015) "Effect fo the Internal Inclusions on Fatigue Characteristics of Induction Surface Hardened S55CR Steel", Proceedings of KSME Fall Conference 2015 Korea

Byung-hyun Kang and Byoung-Ho Choi* (2015) "Numerical Analysis of Various Equivalences of an Individual Surface Crack with Periodically Distributed Surface Cracks", CRACK PATHS 2015 (CP 2015), Italy

MyoungYub Lee, GyeongBeom Lee, JoonHyung Shim and Byoung-Ho Choi* (2015) "Evaluation of Physical and Mechanical Properties of Al2O3 Thin Film Deposited on Transparent Polyimide Film by ALD at Low Temperature", ALD 2015, U.S.A

Sang-Youn Park, Byoung-Ho Choi*, Seung Ki Moon and Il-Hyuk Ahn (2015) "Modeling and Observation of Compressive Behaviors of Anisotropic Aluminum Cellular Structures Based on the Voronoi Tessellation Concept", ICM 2015, Germany

Sung-Wook Moon, Byoung-Hyun Kang, Im-Jae Young and Byoung-Ho Choi* (2015) "Observation of the Lab-Scale Windeshield Impact Test and Simulation using the Time Dependent Dynamic Failure Criterion", SAE 2015 World Congress & Exhibition, U.S.A

Sang-Youn Park and Byoung-Ho Choi* (2015) "Finite Element analysis of the compressive behavior of 2-D alumunum foam using Voronoi cells" Proceedings of KSME Spring Conference 2015, Korea

In-Ha Lee, Seung Hak Song and Byoung-Ho Choi* (2015) "Evaluation of the fatigue lifetime of S55CR bearing steels based on the calibration of rotary bending fatigue tester" Proceedings of KSME Spring Conference 2015, Korea

Byung-hyun Kang, Changhun Lee and Byoung-Ho Choi* (2015) "Variation of BSR Characteristics Based on Surface Properties and Deformation Behaviors Due to Degradation of Polymeric Materials", Proceedings of KSNVE Spring Conference 2015, Korea

Jung-Sub Lee, Byunghyun kang, Jungmoo Lee and Byoung-Ho Choi* (2015) "Quantative Evaluation of Scratch Bahavior Transition due to Thermal Degradation and Injection Direction of Thermoplastic Polyolefin (TPO)" Proceedings of KSME Spring Conference 2015, Korea

GyeongBeom Lee, KyungHwan Yoon, Byoung-Ho Choi* and SungHee Lee (2015) "A Study of Birefringence Distribution in Injection Molded Parts with Conformal Cooling Channel", ANTEC 2015, U.S.A

Sang-Youn Park and Byoung-Ho Choi* (2014) "Finite Element Analysis of the Compressive Behavior of 2-D Isotropic Aluminum Foam Using Voronoi Cells", Proceedings of KSME Fall Conference 2014, Korea

Sung-Wook Moon, Byoung-Ho Choi*, Byoung-Hyun Kang and Im-Jae Young (2014) "Dynamic Fracture Behavior of Windshield by IDI Test", Proceedings of KSPE Spring Conference 2014 Korea

Jung-Wook Wee, Sang-Yoon Park and Byoung-Ho Choi* (2014) "Effect of Glass Fiber Reinforcements on the Scratch Behavior of Injection Molded Glass Fiber Reinforced Polycarbonate Plate", Proceedings of KSME Spring Conference 2014, Korea

Seung Hak Song, Byoung-Ho Choi* and Seungpyo Lee (2014) "Prediction of the Variation of Fatigue Limit of Indiction Surface Hardened Steel Alloys with Surface Defects", Proceedings of KSME Fall Conference 2014, Korea

GyeongBeom Lee, Byoung-Ho Choi*, Gwon Deok Han and Joon Hyung Shim (2014) "Characterization of ZnO Film Deposited on Polycarbonate by ALD Process", Proceedings of KSPE Spring Conference 2014, Korea

Byoung-Ho Choi*, Jung-Wook Wii and Won-Hee Han (2014) "Parametric Study of the Hydrogen Diffusion in Carbon Steels Under Fatigue Loading Conditions Using Green`s Function", APCFS/SIF-2014 International Congress, Australia

Jung-Wook Wii, Yongjian Zhao and Byoung-Ho Choi* (2014) "Environmental Stress Cracking Behavior of High Crystalline Polypropylene in Different Surface Active Agents Using Modified Notched Constant Load Test", APCFS/SIF-2014 International Congress, Australia

Byung-hyun Kang, Jung-eun Moon, Ki-jung Seo, Byoung-Ho Choi*(2014) “Numerical Simulation of Tubular Steel Columns Assembled with Spot welds and Adhesives under Axial and Bending Impact Loads ”, XIV Pan-American Congress of Applied Mechanics, Chile

Byoung-Ho Choi*, Jung-Wook Wii, Sang-Youn Park(2014) “Effect of glass fiber reinforcements on the scratch behavior of injection molded glass fiber reinforced polycarbonate plate ”, Proceedings of KSME Spring Conference 2014, Korea

Ji-Hun Ahn, Byoung-Ho Choi*(2014) “Evaluation of Dynamic Failure Characteristics of Polymeric Materials Using an Instrumented Scratch Test ”, Proceedings of KSME Spring Conference 2014, Korea

Byoung-Ho Choi, A. Willem deGroot, Mehmet Demirors, Rajen Patel(2013) “Separation of Tear Energy of Polyethylene Blown Films Using Essential Work of Energy ”, SPE/International Polyolefins Conference 2013, U.S.A

Seong Ho Jeon, Byoung-Ho Choi, Chin Hun Chung and Il-Eui Jung(2013) “Development of PC/ABS/NCF Composite for a Lightweight Car Audio Chassis ”, SPE/Eurotec 2013, France

Byoung-Ho Choi*(2013) “Long-Term Durability Assessment of Polymeric Pipes Based On Fracture Mechanics ”, SPE/Asiatec 2013, Korea

Jihun An, Byoung-Ho Choi, Chulhong Kim, Jeong-Moo Lee(2013) “CHARACTERIZATION OF ACRYLONITRILE BUTADIENE STYRENE BLENDS WITH SECANDARY POLYMERS USING FRACTURE MECHANISM MAPS ”, SPE/ANTEC 2013, U.S.A

Byoung-Ho Choi*, Ilhyun Kim, Yongjian Zhao, Ji Mi Lee, Alexander Chudnovsky(2013) “Observation and Analysis of Fatigue Crack Growth in Circular Notched Polyethylene Specimens ”, ICF 13, China

Jihun An, Byung-Hyun Kang, Byoung-Ho Choi*, Hyoung-Jun Kim(2013) “Observation and Evaluation of Scratch Damage Characteristics of Injection Molded, Rubber Toughened Poly(methylmethacrylate) ”, ASME Congress 2013, U.S.A

Gyeong Beom Lee, Seung Hak Song, Sung Wook Moon, Joon Hyung Shim, Byoung-Ho Choi*(2013) “Improvement of Mechanical and Barrier Properties of Polyethylene Blown Films using ALD Process ”, ALD 2013, U.S.A

Ji-Mi Lee, Byoung-Ho Choi*, Yongjian Zhao(2013) “Investigation of fatigue crack behaviors of pipe grade polyethylene using circular notched bar specimen with combined misalignment ”, Proceedings of KSPE Spring Conference 2013, Korea

Won-Hee Han, Byoung-Ho Choi* Jong-Soo Lee(2013) “Improvement of the Dispersion of Functionalized Carbon Nanotubes for the Development of the Reverse Osmosis Membrane ”, Proceedings of KSME Fall Conference 2013, Korea

Byoung-Ho Choi*, Jung-Wook Wii, Sang-Youn Park(2013) “Quantitative Evaluation of the Scratch Characteristics of Injection Molded Polycarbonate Plate with Variable Holding Pressures ”, Proceedings of KSME Fall Conference 2013, Korea

Ji-Mi Lee, Byoung-Ho Choi*(2013) “Crack growth behavior simulation of polyethylene ”, Proceedings of KSME Fall Conference 2013, Korea

Byoung-Hyun Kang, Jung-eun Moon, Ki-jung Seo, Byoung-Ho Choi*(2013) “Impact Simulation of Tubular Steel Columns with Spot Welds and Adhesives using Surface Based Cohesive Behavior ”, Proceedings of KSME Fall Conference 2013, Korea

Byoung-Hyun Kang, Sung-Wook Moon, Im-Jae Young, Byoung-Ho Choi*(2013) “Parametric study of the impact simulation of Automotive Windshield ”, Proceedings of KSME Fall Conference 2013 2013, Korea

Yongjian Zhao, Byoung-Ho Choi*, Jae-Hyuck Noh(2013) “The study about the light-weight of the radiation protection apron of human-body friendliness ”, Proceedings of KSME Fall Conference 2013, Korea

Ji-Hoon Ahn, Byoung-Ho Choi*, Byoung-Hyun Kang(2013) “Transition of Scratch Behavior as Characterization Change of Polymer Materials ”, Proceedings of KSME Spring Conference 2013, Korea

I. Kim, Y.J. Zhao, B.-H. Choi*, J. M. Lee (2012) “EFFECT OF INITIAL GEOMETRIC MISALIGNMENTS OF THE CIRCULAR NOTCHED BAR SPECIMEN ON THE FATIGUE CRACK GROWTH BEHAVIOR ”, CP 2012, Italia

J. H. AN, C. H. KIM, B. H. CHOI(2012) “IDENTIFICATION OF COMMONLY MISPROCESSED ACRYLOITRILE-BUTADIENE-STYRENE(ABS) BLENDS FOR CONSUMER ELECTRONIC PRODUCTS ”, APCFS-MM 2012, Korea

Byoung-Ho Choi*, Alexander Chudnovsky, Kalyan Sehanobish(2012) “Observation and Analysis of Defromation and Failure Mechanisms of Oriented Polymeric Foam Materials ”, SPE/ANTEC 2012, U.S.A

Il-Hyun Kim, Byoung-Ho Choi*(2012) “EVALUATION OF FRACTURE CHARACTERISTICS OF POLYETHYLENE BLOWN FILMS USING THE ESSENTIAL WORK OF FRACTURE (EWF) WITH VARIABLE FILM ORIENTATIONS ”, SPE/ANTEC 2012, U.S.A

Gyeong Beom Lee, Byoung-Ho Choi, Joon Hyung Shim(2012) “Atomic Layer Deposition of Al2O3 Films on Polyethylene Blown Film ”, ALD 2012, Germany

Il-Hyun Kim, Byoung-Ho Choi*, Ji-Hong Kim, Yongjian Zhao,Ji-Mi Lee, Jung-Moo Lee(2012) “Effect of the Pre-torsion of the Circular Notched Bar (CNB) Specimen of Polyethylene on the Fatigue Crack Behavior ”, Proceedings of KSPE Spring Conference 2012, Korea

Gyeong-Beom Lee,, Byoung-Ho Choi*, Hee-Suck Noh(2012) “A quantitative evaluation of the scratch behavior of polycarbonate composites filled with glass fibers ”, Proceedings of KSPE Spring Conference 2012, Korea

Ji-Hoon Ahn,?Byoung-Ho Choi*, Byoung-Hyun Kang, Hyoung-Joon Kim(2012) “Quantitative Evaluation of the Scratch Behavior of Polymethlymethacrylate/rubber blends ”, Proceedings of KSPE Fall Conference 2012, Korea

Sung-Wook Moon, Gyeong-Beom Lee,Byoung-Ho Choi*, Joon-Hyung Shim(2012) “Surface Characteristics of Transparent Polymer with Al2O3 Thin Film by Atomic Layer Deposition ”, Proceedings of KSPE Fall Conference 2012, Korea

Byoung-Ho Choi*, Alexander Chudnovsky(2012) “Understanding of the Strain Softening Behavior of High Crystalline Impact Copolymer Under Uniaxial Tension ”, Proceedings of Polymer Society of Korea Spring Conference 2012, Korea

Byoung-Ho Choi*, Gyeong-Beom Lee, Byoung-Sun Kim, Youn-Suck Bae(2012) “Development of polymer based on Liquid Crystal Polymer ”, Proceedings of ADD Conference 2012, Korea

Gyeong Beom Lee, Byoung-Ho Choi*, Joon-Hyung Shim(2012) “Al₂O₃ Deposited on Modified Polymer Surface Using the Atomic Layer Deposition in Low Temperature ”, Proceedings of KSME Fall Conference 2012, Korea

Gyeong Beom Lee, Kyung Sik Son, Suk Won Park, Joon Hyung Shim and Byoung Ho Choi*(2012) “APPLICATION OF THE PLASMA SURFACE MODIFICATION FOR UNIFORM AL2O3 FILMS GROWN BY ATOMIC LAYER DEPOSITION ON POLYETHYLENE BLOWN FILM ”, 222ND ECS MEETING, U.S.A

Yongjian Zhao, Byoung-Ho Choi*, Ki-Soo Lee(2012) “Evaluation of Fatigue Crack Behaviors of Pipe-Grade High-density Polyethylene Using Circular Notched Specimens ”, Proceedings of KSME Fall Conference 2012, Korea

Ilhyun Kim, Youngjian Zhao and Byoung-Ho Choi*(2011) “EFFECT OF MISALIGHMENTS OF A POLYETHYLENE CIRCULAR NOTECHED BAR SPECIMEN ON THE ASSYMETRIC FATIGUE CRACK GROWTH BAHAVIOR ”, SPE/Eurotec 2011, Spain

Byoung-Ho Choi*, Alexander Chudnovsky, Zhenwen Zhou, Kalyan Sehanobish(2011) “Chemical Degradation Driven Cracking in PE Pipes ”, SPE/Eurotec 2011, Spain

I. Kim, Y. Zhao, B.H. Choi*, J.M. Lee , W.H. Han(2011) “Variation the fatigue crack propagation behavior of pipe grade polyethylene with misaligned circular notched specimen ”, SPE/AsiaTEC 2011, Japan

I. Kim, Y. Zhao, B.H. Choi*, J.M. Lee , W.H. Han*(2011) “Variation the fatigue crack propagation behavior of pipe grade polyethylene with misaligned circular notched specimen ”, SPE/AsiaTEC 2011, Japan

B. C. Kim, H. J. Kim, H. S. Lee, B. H. Choi*(2011) “INVESTIGATION OF SCRATCH PROPERTIES OF POLY(METHYL METHACRYLATE) WITH VARIABLE SCRATCH TIP DIAMETERS ”, SPE/ANTEC 2011, Japan

Byoung-Ho Choi, Alexander Chudnovsky, Hoang Pham(2011) “Observation and Modeling of the Tensile Behavior of Rubber Toughened Polypropylene ”, SPE/ANTEC 2011, U.S.A

Byoung-Ho Choi, A. Willem deGroot, Rajen Patel, Mehmet Demirors and Kenneth Anderson(2011) “Investigation of Tear Properties of Polyethylene Blown and Compression Molded Films ”, SPE/ANTEC 2011, U.S.A

Byoung-Ho Choi*, Alexander Chudnovsky, Kalyan Sehanobish(2011) “Modeling of Polymeric Foam Deformation Using the True Stress-Strain Relaytions ”, ICM 11, Italia

Yongjian Zhao, Il-Hyun Kim, Won-Hee Han, Byoung-Ho Choi*, Jung-Moo Lee(2011) “Effect of the mis-alignment of the circular notched bar (CNB) specimen of polyethylene on the fatigue behavior ”, Proceedings of KSPE Spring Conference 2011, Korea

Sung-Ho Jeon, Won-Hee Han, Jin -Hun Jung, Hun-Mo Kim, Byoung-Ho Choi*(2011) “Characterization and injection molding analysis of PC/ABS/NF composite for car audio chassis ”, Proceedings of KSPE Spring Conference 2011, Korea

Won-Hee Han, Byoung-Ho Choi*, Jung-Moo Lee(2011) “A Study on the Deformation Behavior of Anisotropic Foam under Compression Load using 2-D Voronoi Cell ”, Proceedings of KSPE Spring Conference 2011, Korea

Il-Hyun Kim, Byoung-Ho Choi*(2011) “Evaluation of Fracture Characteristics of Polyethylene Blown Films Using the Essential Work of Fracture(EWF) with Variable Film Orientations ”, Proceedings of KSPE Fall Conference 2011, Korea

Won-Hee Han, Byoung-Ho Choi*(2011) “A study on the deformation behavior of aluminum foam under compression load using 3-D voronoi cell ”, Proceedings of KSPE Fall Conference 2011, Korea

Byoung-Ho Choi*, Rajen Patel, A. Willem deGroot, Mehmet Demirors, Kenneth Anderson(2010) “Variation of Tear Properties of PE Blown Films by Haze Bands ”, SPE/ANTEC 2010, U.S.A.

Yongjian Zhao, Byoung-Ho Choi*(2010) “Evaluation of the crack initiation characteristics of pipe grade polyethylene under fatigue loads ”, SPE/ANTEC 2010, U.S.A.

Alexander Chudnovsky, Byoung-Ho Choi*(2010) “MICROMECHANICAL MODELING OF MECANICAL BEHAVIOR OF IMPACT MODIFIED POLYPROPYLENE ”, PACAM XI, Brasil.

Alexander Chudnovsky, Byoung-Ho Choi*(2010) “CRACK INITIATION IN HIGH DENSITY POLYETHYLENE PIPE RESULTING FROM CHEMICAL DEGRADATION ”, PACAM XI, Brasil.

Hyoung-Joon Kim, Bong-Chul Kim, Byoung-Ho Choi*, Ho-Sang Lee (2010) “Charaterization of scratch properties of PMMA with variable contents of the slip agent ”, Proceedings of KSPE Spring Conference 2010, Korea.

Yongjian Zhao, Il-Hyun Kim, Byoung-Ho Choi*, Jung-Moo Lee (2010) “Crack propagation behavior and fracture life analysis by change the shape of initial notch of Circular Notched Bar (CNB) Specimen”, Proceedings of KSPE Spring Conference 2010, Korea.

Byoung-Ho Choi*, Alexander Chudnovsky (2010) “Modeling and Prediction of the Slow Crack Growth of Polymeric Materials Using the Crack Layer Theory”, Proceedings of Polymer Society of Korea Fall Conference 2010, Korea.

Won-Hee Han, Byoung-Ho Choi* (2010) “Parametric Study of the Hydrogen Diffusion to Carbon Steels under Fatigue Loading Conditions Using the Green’s Function”, Proceedings of KSME Spring Conference 2010, Korea.

Byoung-Ho Choi*, Alexander Chudnovsky (2010) “Fundamental Understanding of Stress Corrosion Cracking (SCC) in Various Materials”, 9th International Conference on Fracture and Damage Mechanics, Japan.

Byoung-Ho Choi, Rajen Patel, A. Willem deGroot, Mehmet Demirors and Kenneth Anderson. (2010) “Variation of Tear Properties of Polyethylene Blown Films due to Haze Bands”, Proceedings of ANTEC 2010, Orlando,FL,U.S.A.,May16-20.

Byoung-Ho Choi and Yongjian Zhao. (2010) “Evaluation of the Crack Initiation Characteristics of Pipe Grade Polyethylene under Fatigue Loads”, Proceedings of ANTEC 2010, Orlando,FL,U.S.A.,May16-20.

Alexander Chudnovsky and Byoung-Ho Choi (2010). “Crack Initiation in High Density Polyethylene Pipe Resulting from Chemical Degradation”, Proceedings of the 11th PACAM, Foz do Iguassu, Brazil, January 4-8.

Byoung-Ho Choi and Alexander Chudnovsky (2010). “Micromechanical Modeling of Mechanical Behavior of Impact Modified Polypropylene”, Proceedings of the 11th PACAM, Foz do Iguassu, Brazil, January 4-8.

Byoung-Ho Choi, Rajen Patel, A. Willem deGroot, Mehmet Demirors, Lizhi Liu, and Kenneth Anderson (2009). “Investigation of the Tear Property of Polyethylene Blown Films at Variable Angles”, Proceedings of ANTEC 2009, Chicago, IL, U.S.A., June 22-24.

Jeongmoo Lee, Byoung-Ho Choi, Jongsin Moon and Eonseok Lee (2008). “A Study on Fracture Behavior of Materials for CVJ Boots by EWF Method”, Proceedings of KSAE 2008 Annual Conference, Daejeon, Korea, November 19-21, pp. 2829-2834.

Kijeong Seo, Byoungho Choi and Jeongmoo Lee (2008). “Assessment of Interactions between Mode-mixity and Defects by Using FEA”, Proceedings of KSAE 2008 Annual Conference, Daejeon, Korea, November 19-21.

Byoung-Ho Choi and Alexander Chudnovsky (2008). “Modeling of the Propagation of Stress Corrosion Cracking”, Proceedings of KSAE 2008 Annual Conference, Daejeon, Korea., November 12-14.

Yongjian Zhao, Kijeong Seo, Byoung-Ho Choi and Jeongmoo Lee (2008). “Analysis of Stress Intensity Factors of a Non-Homogeneous Material with a Single Inclusion using LEFM”, Proceedings of KSPE Fall 2008 Conference, Daejeon, Korea., November 12-14.

Byoung-Ho Choi, Zenwen Zhou and Alexander Chudnovsky (2008). “Modeling of Stress Corrosion Cracking in Plastic Pipes”, Proceedings of Pipelines 2008, Atlanta, GA, U.S.A., July 22-27.

Byoung-Ho Choi, Rajesh Paradkar, Pak-Meng Cham, William Michie, Zhenwen Zhou and Alexander Chudnovsky (2008). “SEM and FTIR Analysis of PE Pipe Fracture in Accelerated Test Conditions”, Proceedings of ANTEC 2008, Milwaukee, WI, U.S.A., May 4-8.

Lizhi Liu, Mehmet Demirors, Rajen Patel, Byoung-Ho Choi and Ken Anderson (2008). “Fundamental Understanding of the Relationship between Tear Property and Orientation/Crystal Morphology”, Proceedings of ANTEC 2008, Milwaukee, WI, U.S.A., May 4-8.

Byoung-Ho Choi and Alexander Chudnovsky (2008). “Evaluation of Mechano-Chemical Degradation Induced Stresses of Polyolefin Pipes”, Proceedings of KSME Spring Conference 2008, Cheongju, Korea, May 29-30.

Jeongmoo Lee, Byoung-Ho Choi, Jongsin Moon, Sunho Bang, Chikyoung Baek and Eonseok Lee (2008) “Determination of Plane Stress Fracture Toughness on TPE by the Essential Work of Fracture (EWF) method”, Proceedings of KSAE Spring Conference 2008, Seoul, April 22-23.

Byoung-Ho Choi, Alexander Chudnovsky and Kalyan Sehanobish (2007). “Effect of Inclusion Size and Location on PE Pipe Lifetime”, Proceedings of ANTEC 2007, Cincinnati, OH, U.S.A.

Byoung-Ho Choi, Jeff Weinhold, David Reuschle and Mridula Kapur (2007). “Investigation of Fracture Mechanism of HDPE Subjected to Environmental Stress”, Proceedings of ANTEC 2007, Cincinnati, OH, U.S.A.

Byoung-Ho Choi, Hoang Pham, Richard Fibiger, Alexander Chudnovsky (2006). “Mechanical Characteristics and Fractographic Analysis of Nanocomposites”, Proceedings of ANTEC 2006, Charlotte, NC, U.S.A.

Byoung-Ho Choi, Alexander Chudnovsky and Zhenwen Zhou (2006). “Understanding of the Failure Mechanism of Stress Corrosion Cracking by SEM Analysis”, Proceedings of ANTEC 2006, Charlotte, NC, U.S.A.

Zhenwen Zhou, Byoung-Ho Choi and Alexander Chudnovsky (2006)/ “Crack Initiation in Pipe Grade Polyethylene”, Proceedings of ANTEC 2006, Charlotte, U.S.A.

Byoung-Ho Choi, Alexander Chudnovsky and Kalyan Sehanobish (2005). “Observation and Modeling of Stress Corrosion Cracking In Plastic Pipes”, Proceedings of ANTEC 2005, Boston, MA, U.S.A.

Byoung-Ho Choi, Zhenwen Zhou, Alexander Chudnovsky and Kalyan Sehanobish (2005). “Stress Corrosion Crack Growth in Engineering Plastics”, Proceedings of ICF XI, Turin, Italy.

Byoung-Ho Choi, Zhenwen Zhou, Alexander Chudnovsky and Kalyan Sehanobish (2005). “Crack Initiation in Engineering Thermoplastics Resulting from Chemical, Proceedings of ICF XI, Turin, Italy.