Embedded Files
International Journal
International Journal
국제 학술지
1(1). Seung Jo Kim, and Nam Seo Goo, "Optimal Design of Laminated Composite Plates in a Fuzzy Environment," AIAA Jorunal, Vol. 32, No. 3, pp. 578-583, 1993.
1(1). Seung Jo Kim, and Nam Seo Goo, "Optimal Design of Laminated Composite Plates in a Fuzzy Environment," AIAA Jorunal, Vol. 32, No. 3, pp. 578-583, 1993.
2(2). Seung Jo Kim, Wie Dae Kim and Nam Seo Goo, "Identification of Nonlinear Membership Function for Failure of Sturctural Material and Its Application to Structural Optimization," International Journal for Fuzzy Sets and Systems, Vol. 66, pp. 15-25, 1994.
2(2). Seung Jo Kim, Wie Dae Kim and Nam Seo Goo, "Identification of Nonlinear Membership Function for Failure of Sturctural Material and Its Application to Structural Optimization," International Journal for Fuzzy Sets and Systems, Vol. 66, pp. 15-25, 1994.
3(3). Seung Jo Kim, Nam Seo Goo and Tae Won Kim, "The Effect of Curvature on the Dynamic Response and Impact- Induced Damage in Composite Laminates," Composite Science and Technology, Vol. 57, pp. 763-773, 1997.
3(3). Seung Jo Kim, Nam Seo Goo and Tae Won Kim, "The Effect of Curvature on the Dynamic Response and Impact- Induced Damage in Composite Laminates," Composite Science and Technology, Vol. 57, pp. 763-773, 1997.
4(4). Nam Seo Goo and Seung Jo Kim, "Dynamic Contact Analysis of Laminated Composite Plate Under Low-Velocity Impact," AIAA Journal, Vol. 35, No. 9, pp. 1518-1521, 1997.
4(4). Nam Seo Goo and Seung Jo Kim, "Dynamic Contact Analysis of Laminated Composite Plate Under Low-Velocity Impact," AIAA Journal, Vol. 35, No. 9, pp. 1518-1521, 1997.
5(5). Seung Jo Kim and Nam Seo Goo, "Dynamic Contact Responses of Laminated Composite Plates According to Impactor's Shape," Computers and Structures, Vol. 65, No. 1, pp. 83-90, 1997.
5(5). Seung Jo Kim and Nam Seo Goo, "Dynamic Contact Responses of Laminated Composite Plates According to Impactor's Shape," Computers and Structures, Vol. 65, No. 1, pp. 83-90, 1997.
6(6). Seung Jo Kim and Nam Seo Goo, "Analysis of Impact Response and Damage of Composite Panels by Finite Element Method," Key Engineering Materials, Vol. 141-143, pp. 695-712, 1998.
6(6). Seung Jo Kim and Nam Seo Goo, "Analysis of Impact Response and Damage of Composite Panels by Finite Element Method," Key Engineering Materials, Vol. 141-143, pp. 695-712, 1998.
7(7). Nam Seo Goo, Young-Doo Kwon, Cheol Kim and Kwang Joon Yoon, "Behaviors and Performance Evaluations of Lightweight Piezo-composite Curved Actuator," Journal of Intelligent Material System and Structures, Vol. 12, No. 9, pp. 639-646, 2001.9.
7(7). Nam Seo Goo, Young-Doo Kwon, Cheol Kim and Kwang Joon Yoon, "Behaviors and Performance Evaluations of Lightweight Piezo-composite Curved Actuator," Journal of Intelligent Material System and Structures, Vol. 12, No. 9, pp. 639-646, 2001.9.
8. Yongwoo Lee, Nam Seo Goo and Seyoung Im, "Application of Two-State M-Integral for Analysis of Adhesive Lap Joints," International Journal for Numerical Methods in Engineering, Vol. 52, pp. 903-920, 2001.11.
8. Yongwoo Lee, Nam Seo Goo and Seyoung Im, "Application of Two-State M-Integral for Analysis of Adhesive Lap Joints," International Journal for Numerical Methods in Engineering, Vol. 52, pp. 903-920, 2001.11.
9. Kwang Joon Yoon, Seokjun Shin, Hoon Cheol Park and Nam Seo Goo, "Design and Manufacturing of LIghtweight Piezo-composite Curved Actuator," Smart Materials and Structures, Vol. 11, pp. 163-168, 2002.2.
9. Kwang Joon Yoon, Seokjun Shin, Hoon Cheol Park and Nam Seo Goo, "Design and Manufacturing of LIghtweight Piezo-composite Curved Actuator," Smart Materials and Structures, Vol. 11, pp. 163-168, 2002.2.
10. Sangki Lee, Byung Chan Cho, Hoon Cheol Park, Kwang Joon Park, Nam Seo Goo, “Analysis of Multi-layered Actuators Using an Assumed Strain Solid Element,” Materials Chemistry and Physics, Vol. 75, pp. 174-177, 2002.4.
10. Sangki Lee, Byung Chan Cho, Hoon Cheol Park, Kwang Joon Park, Nam Seo Goo, “Analysis of Multi-layered Actuators Using an Assumed Strain Solid Element,” Materials Chemistry and Physics, Vol. 75, pp. 174-177, 2002.4.
11. Young Doo Kwon, Nam Seo Goo, Tae Hyeok Yun and J.K. Park, "Formula for Stiffness of Bolt-jointed Members with Sleeve and Its Applications," Journal of Structural Engineering, pp. 951-955, 2002.7.
11. Young Doo Kwon, Nam Seo Goo, Tae Hyeok Yun and J.K. Park, "Formula for Stiffness of Bolt-jointed Members with Sleeve and Its Applications," Journal of Structural Engineering, pp. 951-955, 2002.7.
12. Cheol Kim, Bum-Sik Park, and Nam Seo Goo, “Shape Changes by Coupled Bending and Twisting of Shape- Memory-Alloy-Embedded Composite Beams,” Smart Materials and Structures, Vol. 11, pp. 519-526, 2002.7.
12. Cheol Kim, Bum-Sik Park, and Nam Seo Goo, “Shape Changes by Coupled Bending and Twisting of Shape- Memory-Alloy-Embedded Composite Beams,” Smart Materials and Structures, Vol. 11, pp. 519-526, 2002.7.
13(8). Nam Seo Goo and Kwang Joon Yoon, “Analysis of LIPCA-C Actuators,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1959-1964, 2003.4.
13(8). Nam Seo Goo and Kwang Joon Yoon, “Analysis of LIPCA-C Actuators,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1959-1964, 2003.4.
14(9). Nam Seo Goo and Kyeongsik Woo, “Measurement and Prediction OF Effective Thermal Conductivity for Woven Fabric Composites,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1808-1813, 2003.4.
14(9). Nam Seo Goo and Kyeongsik Woo, “Measurement and Prediction OF Effective Thermal Conductivity for Woven Fabric Composites,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1808-1813, 2003.4.
15. Young Doo Kwon, Nam Seo Goo, and Tae Hyeok Yun, “Non-Conforming Solid Elements for the Analysis of Bending Deformation of Isotropic/Orthotropic Materials with the Smallest D.O.F.,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1863-1869, 2003.4.
15. Young Doo Kwon, Nam Seo Goo, and Tae Hyeok Yun, “Non-Conforming Solid Elements for the Analysis of Bending Deformation of Isotropic/Orthotropic Materials with the Smallest D.O.F.,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1863-1869, 2003.4.
16. Young Doo Kwon, Nam Seo Goo, and Bum Soo Lim, “Resolution of Defects in Degenerated Shell Elements through Modification of Gauss Integration,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1877-1883, 2003.4.
16. Young Doo Kwon, Nam Seo Goo, and Bum Soo Lim, “Resolution of Defects in Degenerated Shell Elements through Modification of Gauss Integration,” International J. of Modern Physics B, Vol. 17, Nos. 8 & 9, pp. 1877-1883, 2003.4.
17. Sangki Lee, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon, and Chang Min Cho, “A Nine-node Assumed Strain Shell Element for Analysis of Coupled Electro-mechanical System,” Smart Materials and Structures, Vol. 12, No. 3, pp. 355-362, 2003.6.
17. Sangki Lee, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon, and Chang Min Cho, “A Nine-node Assumed Strain Shell Element for Analysis of Coupled Electro-mechanical System,” Smart Materials and Structures, Vol. 12, No. 3, pp. 355-362, 2003.6.
18. Hoon Cheol Park, Nam Seo Goo, Kyung Jae Min, and Kwang Joon Yoon, “Three-Dimensional Cure Simulation of Composite Structure by the Finite Element Method,” Composite Structures, Vol. 62, pp. 51-57, 2003.10.
18. Hoon Cheol Park, Nam Seo Goo, Kyung Jae Min, and Kwang Joon Yoon, “Three-Dimensional Cure Simulation of Composite Structure by the Finite Element Method,” Composite Structures, Vol. 62, pp. 51-57, 2003.10.
19(10). Nam Seo Goo, Andi Haris, Hee Chul Hwang, Hoon Cheol Park, and Kwang Joon Yoon, “A Parametric Study to Determine the Behaviors of Lightweight Piezo-composite Curved Actuators in Micro Aerial Vehicle Applications,” Journal of Intelligent Material System and Structures, Vol. 15. No. 2, pp. 71-75, 2004.2.
19(10). Nam Seo Goo, Andi Haris, Hee Chul Hwang, Hoon Cheol Park, and Kwang Joon Yoon, “A Parametric Study to Determine the Behaviors of Lightweight Piezo-composite Curved Actuators in Micro Aerial Vehicle Applications,” Journal of Intelligent Material System and Structures, Vol. 15. No. 2, pp. 71-75, 2004.2.
20. Hoon Cheol Park, Jung Park, Nam Seo Goo, Kwang Joon Yoon, and Jae Hwa Lee, “Analysis of Low-Velocity Impact Impact on Composite Sandwich Panels using an Assumed Strain Solid Element,” Key Engineering Materials, Vols. 261-263, pp. 283-288, 2004.3.
20. Hoon Cheol Park, Jung Park, Nam Seo Goo, Kwang Joon Yoon, and Jae Hwa Lee, “Analysis of Low-Velocity Impact Impact on Composite Sandwich Panels using an Assumed Strain Solid Element,” Key Engineering Materials, Vols. 261-263, pp. 283-288, 2004.3.
21. Kwang Joon Yoon, Yong Bum Kim, Young Sung Kim, Je Dong Lee, Hoon Cheol Park, Nam Seo Goo, and Jae Hwa Lee, “Parametric Study on Compression Deformation Behavior of Conformal Load-bearing Smart Antenna Structure,” Key Engineering Materials, Vols. 261-263, pp. 663-668, 2004.3.
21. Kwang Joon Yoon, Yong Bum Kim, Young Sung Kim, Je Dong Lee, Hoon Cheol Park, Nam Seo Goo, and Jae Hwa Lee, “Parametric Study on Compression Deformation Behavior of Conformal Load-bearing Smart Antenna Structure,” Key Engineering Materials, Vols. 261-263, pp. 663-668, 2004.3.
22. Kwang Joon Yoon, Kyun Yeol Kim, Nam Seo Goo, Hoon Cheol Park, and J. R. Haw, “Actuator Performance Degradation of Piezo-Composite Actuator LIPCA under Cyclic Actuation,” Key Engineering Materials, Vols. 261-263, pp. 1331-1336, 2004.3.
22. Kwang Joon Yoon, Kyun Yeol Kim, Nam Seo Goo, Hoon Cheol Park, and J. R. Haw, “Actuator Performance Degradation of Piezo-Composite Actuator LIPCA under Cyclic Actuation,” Key Engineering Materials, Vols. 261-263, pp. 1331-1336, 2004.3.
23. Sangki Lee, Byung C. Cho, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Piezoelectric Actuator-Sensor Analysis using a Three-dimensional Assumed Strain Solid Element, ” Journal of Intelligent Material System and Structures, Vol. 15, pp. 329-338, 2004.5.
23. Sangki Lee, Byung C. Cho, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Piezoelectric Actuator-Sensor Analysis using a Three-dimensional Assumed Strain Solid Element, ” Journal of Intelligent Material System and Structures, Vol. 15, pp. 329-338, 2004.5.
24. Kwang Joon Yoon, Ki Hoon Park, Sangki Lee, Nam Seo Goo, and Hoon Cheol Park, “Analytical Design Model for a Piezo-Composite Unimorph Actuator and its Verification using Lightweight Piezo-Composite Curved Actuator,” Smart Materials and Structures, Vol. 13, pp. 459-467, 2004.6.
24. Kwang Joon Yoon, Ki Hoon Park, Sangki Lee, Nam Seo Goo, and Hoon Cheol Park, “Analytical Design Model for a Piezo-Composite Unimorph Actuator and its Verification using Lightweight Piezo-Composite Curved Actuator,” Smart Materials and Structures, Vol. 13, pp. 459-467, 2004.6.
25. Kyeongsik Woo and Nam Seo Goo,“Thermal Conductivity of Carbon-phenolic 8-harness Satin Weave Composites,” Composite Structures, Vol. 66, pp. 521-526, 2004.7.
25. Kyeongsik Woo and Nam Seo Goo,“Thermal Conductivity of Carbon-phenolic 8-harness Satin Weave Composites,” Composite Structures, Vol. 66, pp. 521-526, 2004.7.
26(11). Andi Haris, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon,“Modeling and Analysis for the Development of Lightweight Piezoceramic Composite Actuators (LIPCA),” Computational Materials Science, Vol. 30, pp. 474-481, 2004.8.
26(11). Andi Haris, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon,“Modeling and Analysis for the Development of Lightweight Piezoceramic Composite Actuators (LIPCA),” Computational Materials Science, Vol. 30, pp. 474-481, 2004.8.
27(12). Nam Seo Goo, Andi Haris, Hoon Cheol Park, Kwang Joon Yoon,“Validation of a Laminated Beam Model of LIPCA Piezoelectric Actuators,” Journal of Intelligent Material System and Structures, Vol. 16, pp. 189-195, 2005.3.
27(12). Nam Seo Goo, Andi Haris, Hoon Cheol Park, Kwang Joon Yoon,“Validation of a Laminated Beam Model of LIPCA Piezoelectric Actuators,” Journal of Intelligent Material System and Structures, Vol. 16, pp. 189-195, 2005.3.
28. Jae Whan Cho, Jeong Won Kim, Yong Chae Jung, and Nam Seo Goo, “Electroactive Shape-Memory Polyurethane Composites Incorporating Carbon Nanotubes,” Macromolecular Rapid Communications, Vol. 26, pp. 412-416, 2005.3.
28. Jae Whan Cho, Jeong Won Kim, Yong Chae Jung, and Nam Seo Goo, “Electroactive Shape-Memory Polyurethane Composites Incorporating Carbon Nanotubes,” Macromolecular Rapid Communications, Vol. 26, pp. 412-416, 2005.3.
29. K.Y. Kim, K.H. Park, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Performance Evaluation of Lightweight Piezo-composite Actuators,” Sensors and Actuators A - Physical, Vol. 120, pp. 123-129, 2005.4.
29. K.Y. Kim, K.H. Park, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Performance Evaluation of Lightweight Piezo-composite Actuators,” Sensors and Actuators A - Physical, Vol. 120, pp. 123-129, 2005.4.
30. Sahng Min, Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon,and Nam Seo Goo, “Design and Demonstration of a Biomimetic Wing Section using a Lightweight Piezo-composite Actuator (LIPCA),” Smart Materials and Structures, Vol. 14, pp. 496-503, 2005.5.
30. Sahng Min, Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon,and Nam Seo Goo, “Design and Demonstration of a Biomimetic Wing Section using a Lightweight Piezo-composite Actuator (LIPCA),” Smart Materials and Structures, Vol. 14, pp. 496-503, 2005.5.
31. Yanti Rachmadini, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo,“The Effect of Electro-mechanical Coupling Stiffness on the Through-the-Thickness Electric Potential Distribution of Piezoelectric Actuators,” Smart Materials and Structures, Vol. 14, pp. 754-758, 2005.9.
31. Yanti Rachmadini, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo,“The Effect of Electro-mechanical Coupling Stiffness on the Through-the-Thickness Electric Potential Distribution of Piezoelectric Actuators,” Smart Materials and Structures, Vol. 14, pp. 754-758, 2005.9.
32(13). Il Hyun Paik, Nam Seo Goo, Kwang Joon Yoon, Yong Chae Jung, Jae Whan Cho,“Electric Resistance Property of a Conducting Shape Memory Polyurethane Actuator,” Key Engineering Materials, Vol. 297-300, pp. 1539-1544, 2005.11.
32(13). Il Hyun Paik, Nam Seo Goo, Kwang Joon Yoon, Yong Chae Jung, Jae Whan Cho,“Electric Resistance Property of a Conducting Shape Memory Polyurethane Actuator,” Key Engineering Materials, Vol. 297-300, pp. 1539-1544, 2005.11.
33. Sang Ki Lee, Young Sung Kim, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, Yung Yu and Chahngmin Cho,“Performance analysis of a lightweight piezo-composite actuator considering the material non-linearity of an embedded PZT wafer,” Smart Materials and Structures, Vol. 14, pp. 1101-1106, 2005.11.
33. Sang Ki Lee, Young Sung Kim, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, Yung Yu and Chahngmin Cho,“Performance analysis of a lightweight piezo-composite actuator considering the material non-linearity of an embedded PZT wafer,” Smart Materials and Structures, Vol. 14, pp. 1101-1106, 2005.11.
34. Nanda Gopal Sahoo, Yong Chae Jung, Nam Seo Goo, and Jae Whan Cho, “Conducting Shape Memory Polyurethane-Polypyrrole Composites for an Electroactive Actuator,” Macromolecular Materials and Engineering, Vol. 290, pp. 1149 - 1155, 2005.11.
34. Nanda Gopal Sahoo, Yong Chae Jung, Nam Seo Goo, and Jae Whan Cho, “Conducting Shape Memory Polyurethane-Polypyrrole Composites for an Electroactive Actuator,” Macromolecular Materials and Engineering, Vol. 290, pp. 1149 - 1155, 2005.11.
35(14). Nam Seo Goo, Kwang Joon Yoon, Seok Heo,“Structural Analysis of Tape-wrapped Structures,” Computational Materials Science, Vol. 34, pp. 369-376, 2005.12.
35(14). Nam Seo Goo, Kwang Joon Yoon, Seok Heo,“Structural Analysis of Tape-wrapped Structures,” Computational Materials Science, Vol. 34, pp. 369-376, 2005.12.
36(15). Arief Suhariyono, Jong Hyun Kim, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon,“Design of Precision Balance and Aerodynamic Characteristic Measurement System for Micro Aerial Vehicles,” Aerospace Science and Technology, Vol. 10, pp. 92-99, 2006.3.
36(15). Arief Suhariyono, Jong Hyun Kim, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon,“Design of Precision Balance and Aerodynamic Characteristic Measurement System for Micro Aerial Vehicles,” Aerospace Science and Technology, Vol. 10, pp. 92-99, 2006.3.
37(16). Gyou Beom Kim, Nam Seo Goo, Kwang Joon Yoon, Hoon Cheol Park, and Yung H. Yu,“Design, Fabrication, and Performance Test of a Rotary-wing Micro Aerial Vehicle,” Journal of Aircraft, Vol.43, No. 2, pp. 564-566, 2006.3.
37(16). Gyou Beom Kim, Nam Seo Goo, Kwang Joon Yoon, Hoon Cheol Park, and Yung H. Yu,“Design, Fabrication, and Performance Test of a Rotary-wing Micro Aerial Vehicle,” Journal of Aircraft, Vol.43, No. 2, pp. 564-566, 2006.3.
38(17). Nam Seo Goo, Hoon Cheol Park, and Kwang Joon Yoon,“Conceptual Design, Thrust Test, and Finite Element Analysis of a Tip-jet Rotor using a Small Turbo-jet Engine,” Key Engineering Materials, Vol. 306-308, pp. 541-546, 2006.5.
38(17). Nam Seo Goo, Hoon Cheol Park, and Kwang Joon Yoon,“Conceptual Design, Thrust Test, and Finite Element Analysis of a Tip-jet Rotor using a Small Turbo-jet Engine,” Key Engineering Materials, Vol. 306-308, pp. 541-546, 2006.5.
39. Yudi Heryawan, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon, and Yung Hwan Byun,“Structural Design, Manufacturing, and Wind Tunnel Test of a Small Expandable Wing,” Key Engineering Materials, Vol. 306-308, pp. 1157-1162, 2006.5.
39. Yudi Heryawan, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon, and Yung Hwan Byun,“Structural Design, Manufacturing, and Wind Tunnel Test of a Small Expandable Wing,” Key Engineering Materials, Vol. 306-308, pp. 1157-1162, 2006.5.
40. Moh. Syaifuddin, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Design and Test of Flapping Device Mimicking Insect Flight,” Key Engineering Materials, Vol. 306-308, pp. 1163-1168, 2006.5.
40. Moh. Syaifuddin, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Design and Test of Flapping Device Mimicking Insect Flight,” Key Engineering Materials, Vol. 306-308, pp. 1163-1168, 2006.5.
41. K.J. Yoon, J. D. Lee, K.B. Kim, H. C. Park, and N. S. Goo,“Design and Manufacturing of IDEAL with Stacked Ceramic Layers and Inter-digitated Electrodes,” Key Engineering Materials, Vol. 306-308, pp. 1175-1180, 2006.5.
41. K.J. Yoon, J. D. Lee, K.B. Kim, H. C. Park, and N. S. Goo,“Design and Manufacturing of IDEAL with Stacked Ceramic Layers and Inter-digitated Electrodes,” Key Engineering Materials, Vol. 306-308, pp. 1175-1180, 2006.5.
42. Hery Setiawan, Kwang Joon Yoon, Hoon Cheol Park, and Nam Seo Goo,“Power Consumption of Piezo-composite Actuator at Resonance Frequency,” Key Engineering Materials, Vol. 306-308, pp. 1181-1186, 2006.5.
42. Hery Setiawan, Kwang Joon Yoon, Hoon Cheol Park, and Nam Seo Goo,“Power Consumption of Piezo-composite Actuator at Resonance Frequency,” Key Engineering Materials, Vol. 306-308, pp. 1181-1186, 2006.5.
43. Moh Syaifuddin, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Design and evaluation of LIPCA-actuated flapping device,” Smart Materials and Structures, Vol. 15, pp. 1225-1230, 2006.8.
43. Moh Syaifuddin, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Design and evaluation of LIPCA-actuated flapping device,” Smart Materials and Structures, Vol. 15, pp. 1225-1230, 2006.8.
44. June Sung Joe, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Compressive Deformation Analysis of Smart Skin Structure Embedded with Round Shape Antenna,” Key Engineering Materials, Vol. 321-323, pp. 963-967, 2006.10.
44. June Sung Joe, Hoon Cheol Park, Kwang Joon Yoon, and Nam Seo Goo,“Compressive Deformation Analysis of Smart Skin Structure Embedded with Round Shape Antenna,” Key Engineering Materials, Vol. 321-323, pp. 963-967, 2006.10.
45(18). Il Hyun Paik, Nam Seo Goo, Yong Chae Jung, and Jae Whan Cho, “Development and Application of Conducting Shape Memory Polyurethane Actuators,” Smart Materials and Structures, Vol. 15, pp. 1476-1482, 2006.10.
45(18). Il Hyun Paik, Nam Seo Goo, Yong Chae Jung, and Jae Whan Cho, “Development and Application of Conducting Shape Memory Polyurethane Actuators,” Smart Materials and Structures, Vol. 15, pp. 1476-1482, 2006.10.
46(19). Thanh-Tung Nguyen, and Nam Seo Goo,“A novel PDMS valveless micropump with a circular lightweight piezo-composite actuator,” Key Engineering Materials, Vol. 326-328, pp. 245-248, 2006.11.
46(19). Thanh-Tung Nguyen, and Nam Seo Goo,“A novel PDMS valveless micropump with a circular lightweight piezo-composite actuator,” Key Engineering Materials, Vol. 326-328, pp. 245-248, 2006.11.
47. Sung-Choong Woo, and Nam Seo Goo,“Characterization of the fracture process of a plate-type piezoelectric composite actuator under a bending load by acoustic emission monitoring,” Key Engineering Materials, Vol. 326-328, pp. 693-696, 2006.11.
47. Sung-Choong Woo, and Nam Seo Goo,“Characterization of the fracture process of a plate-type piezoelectric composite actuator under a bending load by acoustic emission monitoring,” Key Engineering Materials, Vol. 326-328, pp. 693-696, 2006.11.
48. Sung-Choong Woo, and Nam Seo Goo,“Bending characteristics of plate-type piezoelectric composite actuators according to applied electric fields and drive frequencies,” Key Engineering Materials, Vol. 326-328, pp. 1701-1704, 2006.11.
48. Sung-Choong Woo, and Nam Seo Goo,“Bending characteristics of plate-type piezoelectric composite actuators according to applied electric fields and drive frequencies,” Key Engineering Materials, Vol. 326-328, pp. 1701-1704, 2006.11.
49. Tedy Wiguna, Seok Heo, Hoon Cheol Park, and Nam Seo Goo,“Mechanical Design of Biomimetic Fish Robot Using LIPCA as Artificial Muscle,” Key Engineering Materials, Vol. 326-328, pp. 1443-1446, 2006.11.
49. Tedy Wiguna, Seok Heo, Hoon Cheol Park, and Nam Seo Goo,“Mechanical Design of Biomimetic Fish Robot Using LIPCA as Artificial Muscle,” Key Engineering Materials, Vol. 326-328, pp. 1443-1446, 2006.11.
50. Quoc Viet Nguyen, Nam Seo Goo, and Hoon Cheol Park,“Behavior of LIghtweight Piezoceramic Composite Actuator under Compressive Load,” Key Engineering Materials, Vol. 326-328, pp. 1403-1406, 2006.11.
50. Quoc Viet Nguyen, Nam Seo Goo, and Hoon Cheol Park,“Behavior of LIghtweight Piezoceramic Composite Actuator under Compressive Load,” Key Engineering Materials, Vol. 326-328, pp. 1403-1406, 2006.11.
51(20). Sung-Choong Woo and Nam Seo Goo*,“Prediction of Actuating Displacement in a Piezoelectric Composite Actuator with a Thin Sandwiched PZT Plate by a Finite Element Simulation,” Journal of Mechanical Science and Technology, Vol. 21, pp. 478-487, 2007.3.
51(20). Sung-Choong Woo and Nam Seo Goo*,“Prediction of Actuating Displacement in a Piezoelectric Composite Actuator with a Thin Sandwiched PZT Plate by a Finite Element Simulation,” Journal of Mechanical Science and Technology, Vol. 21, pp. 478-487, 2007.3.
52. Sung-Choong Woo* and Nam Seo Goo,“Analysis of the Bending Fracture Process for Piezoelectric Composite Actuators using Dominant Frequency Bands by Acoustic Emission,” Composites Science and Technology, Vol. 67, pp. 1499-1508, 2007.3.
52. Sung-Choong Woo* and Nam Seo Goo,“Analysis of the Bending Fracture Process for Piezoelectric Composite Actuators using Dominant Frequency Bands by Acoustic Emission,” Composites Science and Technology, Vol. 67, pp. 1499-1508, 2007.3.
53(21). Sung-Choong Woo, Ki Hoon Park, and Nam Seo Goo*, “Influences of Dome Height and Stored Elastic Energy on the Actuating Performance of a Plate-type Piezoelectric Composite Actuator,” Sensors and Actuators A - Physical, Vol. 137, pp. 110-119, 2007.6.
53(21). Sung-Choong Woo, Ki Hoon Park, and Nam Seo Goo*, “Influences of Dome Height and Stored Elastic Energy on the Actuating Performance of a Plate-type Piezoelectric Composite Actuator,” Sensors and Actuators A - Physical, Vol. 137, pp. 110-119, 2007.6.
54(22). Landong Martua, Seok Heo, and Nam Seo Goo, “Application of a LIPCA for the Structural Vibration Suppression of an Aluminum Cantilever Beam with a Tip Mass,” Journal of Mechanical Science and Technology, Vol.21, No. 6, pp. 919-923, 2007.6.
54(22). Landong Martua, Seok Heo, and Nam Seo Goo, “Application of a LIPCA for the Structural Vibration Suppression of an Aluminum Cantilever Beam with a Tip Mass,” Journal of Mechanical Science and Technology, Vol.21, No. 6, pp. 919-923, 2007.6.
55. Anh Kim Tran, K. J. Yoon and Nam Seo Goo, “Actuation Performance Improvement of Lightweight Piezo-Composite Actuator with an Inter Digitated Electrode Actuation Layer,” Journal of the Korean Physical Society, Vol. 51, pp. S16-S21, 2007.7.
55. Anh Kim Tran, K. J. Yoon and Nam Seo Goo, “Actuation Performance Improvement of Lightweight Piezo-Composite Actuator with an Inter Digitated Electrode Actuation Layer,” Journal of the Korean Physical Society, Vol. 51, pp. S16-S21, 2007.7.
56. Quoc Viet Nguyen, Hoon Cheol Park, and Nam Seo Goo, “Performance Analysis of a Piezoceramic Unimorph Actuator under Compressive Mechanical Load and Electric Field,” Journal of the Korean Physical Society, Vol. 51, pp. S56-S61, 2007.7.
56. Quoc Viet Nguyen, Hoon Cheol Park, and Nam Seo Goo, “Performance Analysis of a Piezoceramic Unimorph Actuator under Compressive Mechanical Load and Electric Field,” Journal of the Korean Physical Society, Vol. 51, pp. S56-S61, 2007.7.
57(23). Sung-Choong Woo* and Nam Seo Goo*, “Identification of Failure Mechanisms in a Smart Composite Actuator with a Thin Sandwiched PZT Plate based on Waveform and Primary Frequency Analyses,” Smart Materials and Structures, Vol. 16, pp. 1460-1470, 2007.8.
57(23). Sung-Choong Woo* and Nam Seo Goo*, “Identification of Failure Mechanisms in a Smart Composite Actuator with a Thin Sandwiched PZT Plate based on Waveform and Primary Frequency Analyses,” Smart Materials and Structures, Vol. 16, pp. 1460-1470, 2007.8.
58(24). Nam Seo Goo, Il Hyun Paik, and Kwang Joon Yoon, “The Durability of a Conducting Shape Memory Polyurethane Actuator,” Smart Materials and Structures, Vol. 16, pp. N23-N26, 2007.8.
58(24). Nam Seo Goo, Il Hyun Paik, and Kwang Joon Yoon, “The Durability of a Conducting Shape Memory Polyurethane Actuator,” Smart Materials and Structures, Vol. 16, pp. N23-N26, 2007.8.
59. Seok Heo, Tedy Wiguna, Hoon Cheol Park, and Nam Seo Goo, “Effect of an Artificial Caudal Fin on the Performance of a Biomimetic Fish Robot Propelled by Piezoelectric Actuators,” Journal of Bionic Engineering, Vol. 4, No. 3, pp. 151-158, 2007.9.
59. Seok Heo, Tedy Wiguna, Hoon Cheol Park, and Nam Seo Goo, “Effect of an Artificial Caudal Fin on the Performance of a Biomimetic Fish Robot Propelled by Piezoelectric Actuators,” Journal of Bionic Engineering, Vol. 4, No. 3, pp. 151-158, 2007.9.
60(25). Arief Suhariyono, Nam Seo Goo, and Hoon Cheol Park, “Use of Lightweight Piezo-composite Actuators to Suppress the Active Vibration of an Aluminum Beam,” Journal of Intelligent Material System and Structures, Vol. 19, No. 1, pp. 101-112, 2008.1.
60(25). Arief Suhariyono, Nam Seo Goo, and Hoon Cheol Park, “Use of Lightweight Piezo-composite Actuators to Suppress the Active Vibration of an Aluminum Beam,” Journal of Intelligent Material System and Structures, Vol. 19, No. 1, pp. 101-112, 2008.1.
61(26). Thanh Tung Nguyen, Nam Seo Goo, Vinh Khanh Nguyen, Youngtai Yoo, and Seungbae Park, “Design, Fabrication, and Experimental Characterization of a Flap Valve IPMC Micropump with a Flexibly Supported Diaphragm,” Sensors and Actuators A - Physical, Vol.141, pp. 640-648, 2008.2.
61(26). Thanh Tung Nguyen, Nam Seo Goo, Vinh Khanh Nguyen, Youngtai Yoo, and Seungbae Park, “Design, Fabrication, and Experimental Characterization of a Flap Valve IPMC Micropump with a Flexibly Supported Diaphragm,” Sensors and Actuators A - Physical, Vol.141, pp. 640-648, 2008.2.
62(27). Thanh Tung Nguyen, My Pham, and Nam Seo Goo, “Development of a Peristaltic Micropump for Bio-medical Applications based on mini LIPCA,” Journal of Bionic Engineering, Vol. 5, No. 2, pp. 135-141, 2008.6.
62(27). Thanh Tung Nguyen, My Pham, and Nam Seo Goo, “Development of a Peristaltic Micropump for Bio-medical Applications based on mini LIPCA,” Journal of Bionic Engineering, Vol. 5, No. 2, pp. 135-141, 2008.6.
63. Sung-Choong Woo* and Nam Seo Goo, “Structural Integrity and Failure Mechanisms of a Smart Piezoelectric Actuator under a Cyclic Bending Mode,” Smart Materials and Structures, Vol. 17, 045025 (11pp), 2008.8.
63. Sung-Choong Woo* and Nam Seo Goo, “Structural Integrity and Failure Mechanisms of a Smart Piezoelectric Actuator under a Cyclic Bending Mode,” Smart Materials and Structures, Vol. 17, 045025 (11pp), 2008.8.
64. Anh Kim Tran, Nam Seo Goo, and Kwang Joon Yoon, “Actuation Performance Analysis of Piezo-composite Unimorph Actuator with d33 Actuation Mechanism of Piezo-electric Ceramic Layer,” Journal of Electroceramics, Vol. 20, pp. 259-264, 2008.8.
64. Anh Kim Tran, Nam Seo Goo, and Kwang Joon Yoon, “Actuation Performance Analysis of Piezo-composite Unimorph Actuator with d33 Actuation Mechanism of Piezo-electric Ceramic Layer,” Journal of Electroceramics, Vol. 20, pp. 259-264, 2008.8.
65. VIET-QUOC NGUYEN, M. SYAIFUDDIN, Hoon Cheol PARK, Do Young BYUN, Nam Seo Goo, and Kwang Joon Yoon, “Characteristics of an Insect-mimicking Flapping System Actuated by a Unimorph Piezoceramic Actuator,” Journal of Intelligent Material System and Structures, Vol. 19, pp. 1185-1193, 2008.10.
65. VIET-QUOC NGUYEN, M. SYAIFUDDIN, Hoon Cheol PARK, Do Young BYUN, Nam Seo Goo, and Kwang Joon Yoon, “Characteristics of an Insect-mimicking Flapping System Actuated by a Unimorph Piezoceramic Actuator,” Journal of Intelligent Material System and Structures, Vol. 19, pp. 1185-1193, 2008.10.
66(28). Nam Seo Goo, Van Phuoc Phan, and Kwang Joon Yoon, “Actuation Displacement Performance Change of Prestressed Piezoelectric Actuators Attached to a Flat Surface,” Smart Materials and Structures, Vol. 18, 037003 (5pp), 2009.3.
66(28). Nam Seo Goo, Van Phuoc Phan, and Kwang Joon Yoon, “Actuation Displacement Performance Change of Prestressed Piezoelectric Actuators Attached to a Flat Surface,” Smart Materials and Structures, Vol. 18, 037003 (5pp), 2009.3.
67(29). Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Vibration Suppression of a Flexible Robot Manipulator with a Lightweight Piezo-composite Actuator,” International Journal of Control, Automation, and System, Vol. 7, No.2, pp. 243-251, 2009.4.
67(29). Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Vibration Suppression of a Flexible Robot Manipulator with a Lightweight Piezo-composite Actuator,” International Journal of Control, Automation, and System, Vol. 7, No.2, pp. 243-251, 2009.4.
68. Quang Sang Nguyen, Seok Heo, Hoon Cheol Park, Nam Seo Goo, Taesam Kang, and Kwang Joon Yoon, “A Fish Robot Driven by Piezoceramic Actuators and a Miniatured Power Supply,” International Journal of Control, Automation, and System, Vol. 7, No.2, pp. 267-272, 2009.4.
68. Quang Sang Nguyen, Seok Heo, Hoon Cheol Park, Nam Seo Goo, Taesam Kang, and Kwang Joon Yoon, “A Fish Robot Driven by Piezoceramic Actuators and a Miniatured Power Supply,” International Journal of Control, Automation, and System, Vol. 7, No.2, pp. 267-272, 2009.4.
69. Tedy Wiguna, Seok Heo, Hoon Cheol Park, and Nam Seo Goo, “Design and Experimental Parametric Study of a Fish Robot Actuated by Piezoelectric Actuators,” Journal of Intelligent Material System and Structures, Vol. 20, No. 6, pp. 751-758, 2009.4.
69. Tedy Wiguna, Seok Heo, Hoon Cheol Park, and Nam Seo Goo, “Design and Experimental Parametric Study of a Fish Robot Actuated by Piezoelectric Actuators,” Journal of Intelligent Material System and Structures, Vol. 20, No. 6, pp. 751-758, 2009.4.
70(30). Sung-Choong Woo and Nam Seo Goo*, “Effect of Electric Cyclic Loading on Fatigue Cracking of a Bending Piezoelectric Hybrid Composite Actuator,” Composites Science and Technology, Vol. 69, pp. 1764-1771, 2009.9.
70(30). Sung-Choong Woo and Nam Seo Goo*, “Effect of Electric Cyclic Loading on Fatigue Cracking of a Bending Piezoelectric Hybrid Composite Actuator,” Composites Science and Technology, Vol. 69, pp. 1764-1771, 2009.9.
71(31). Dong-Ho Ha, Van Phuoc Phan, Nam Seo Goo, and Cheol Heui Han, “Three-dimensional Electro-fluid-structural Interaction Simulation for Pumping Performance Evaluation of a Valveless Micropump,”Smart Materials and Structures, Vol. 18, 104015 (8pp), 2009.10.
71(31). Dong-Ho Ha, Van Phuoc Phan, Nam Seo Goo, and Cheol Heui Han, “Three-dimensional Electro-fluid-structural Interaction Simulation for Pumping Performance Evaluation of a Valveless Micropump,”Smart Materials and Structures, Vol. 18, 104015 (8pp), 2009.10.
72(32). Sung Choong Woo* and Nam Seo Goo*, “The Relationship between Electromechanical Cyclic Loading and the Performance Degradation of a Smart Bending Piezoelectric Actuator,”Smart Materials and Structures, Vol. 18, 104021 (10pp), 2009.10.
72(32). Sung Choong Woo* and Nam Seo Goo*, “The Relationship between Electromechanical Cyclic Loading and the Performance Degradation of a Smart Bending Piezoelectric Actuator,”Smart Materials and Structures, Vol. 18, 104021 (10pp), 2009.10.
73(33). Tailie Jin, Nam Seo Goo, Sung-Choong Woo, and Hoon Cheol Park, “Use of a Digital Image Correlation Technique for Measuring the Material Properties of Beetle Wing,” Journal of Bionic Engineering, Vol. 6, No. 3, pp. 224-231, 2009.12.
73(33). Tailie Jin, Nam Seo Goo, Sung-Choong Woo, and Hoon Cheol Park, “Use of a Digital Image Correlation Technique for Measuring the Material Properties of Beetle Wing,” Journal of Bionic Engineering, Vol. 6, No. 3, pp. 224-231, 2009.12.
74. Jang-Woo Lee, Ji-Hye Kim, Nam Seo Goo, Jae Yeol Lee, and Young-Tai Yoo, “Ion-Conductive Poly(vinyl alcohol)-Based IPMCs,” Journal of Bionic Engineering, Vol. 7, No. 1, pp. 19-28, 2010.3.
74. Jang-Woo Lee, Ji-Hye Kim, Nam Seo Goo, Jae Yeol Lee, and Young-Tai Yoo, “Ion-Conductive Poly(vinyl alcohol)-Based IPMCs,” Journal of Bionic Engineering, Vol. 7, No. 1, pp. 19-28, 2010.3.
75. Sung-Choong Woo and Nam Seo Goo, “Monitoring of Failure Mechanisms in a Composite Bending Actuator during Cyclic Loading by Acoustic Emission,” International Journal of Modern Physics B, Vol. 24, No. 15&16, pp. 2339-2344, 2010.6.
75. Sung-Choong Woo and Nam Seo Goo, “Monitoring of Failure Mechanisms in a Composite Bending Actuator during Cyclic Loading by Acoustic Emission,” International Journal of Modern Physics B, Vol. 24, No. 15&16, pp. 2339-2344, 2010.6.
76(34). Do-Soon Hwang, Tailie Jin and Nam Seo Goo, “An Optical Method for the Elastic Modulus Measurement of Bio-structures,” International Journal of Modern Physics B, Vol. 24, No. 15&16, pp. 2651-2656, 2010.6.
76(34). Do-Soon Hwang, Tailie Jin and Nam Seo Goo, “An Optical Method for the Elastic Modulus Measurement of Bio-structures,” International Journal of Modern Physics B, Vol. 24, No. 15&16, pp. 2651-2656, 2010.6.
77. Quoc Viet Nguyen， Quang Tri Truong，Hoon Cheol Park ，Nam Seo Goo，and Doyoung Byun, “Measurement of Force Produced by an Insect-Mimicking Flapping-Wing System,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S94-S102, 2010.9.
77. Quoc Viet Nguyen， Quang Tri Truong，Hoon Cheol Park ，Nam Seo Goo，and Doyoung Byun, “Measurement of Force Produced by an Insect-Mimicking Flapping-Wing System,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S94-S102, 2010.9.
78. Prasetiyo Radius Bhayu， Quoc-Viet Nguyen，Hoon Cheol Park， Nam Seo Goo，and Doyoung Byun, “Artificial Cambered-Wing for a Beetle-Mimicking Flapper,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S130-S136, 2010.9.
78. Prasetiyo Radius Bhayu， Quoc-Viet Nguyen，Hoon Cheol Park， Nam Seo Goo，and Doyoung Byun, “Artificial Cambered-Wing for a Beetle-Mimicking Flapper,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S130-S136, 2010.9.
79(35). Tailie Jin, Nam Seo Goo, and Hoon Cheol Park, “Finite Element Modeling of a Beetle Wing,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S145-S149, 2010.9.
79(35). Tailie Jin, Nam Seo Goo, and Hoon Cheol Park, “Finite Element Modeling of a Beetle Wing,” Journal of Bionic Engineering, Vol. 7, Suppl., pp. S145-S149, 2010.9.
80(36). Ngoc San Ha and Nam Seo Goo, “Propulsion Modeling and Analysis of a Biomimetic Swimmer,” Journal of Bionic Engineering, Vol. 7, No. 3, pp. 259-266, 2010.9.
80(36). Ngoc San Ha and Nam Seo Goo, “Propulsion Modeling and Analysis of a Biomimetic Swimmer,” Journal of Bionic Engineering, Vol. 7, No. 3, pp. 259-266, 2010.9.
81(37). Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezocomposite Generating Element in Energy Harvesting,” Journal of Intelligent Material System and Structures, Vol. 21, No. 14, pp. 1427-1436, 2010.9.
81(37). Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezocomposite Generating Element in Energy Harvesting,” Journal of Intelligent Material System and Structures, Vol. 21, No. 14, pp. 1427-1436, 2010.9.
82(38). Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezocomposite Generating Element for Harvesting Wind Energy in an Urban Region,” Aircraft Engineering and Aerospace Technology, Vol. 82, No. 6, pp. 376-381, 2010.12.
82(38). Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezocomposite Generating Element for Harvesting Wind Energy in an Urban Region,” Aircraft Engineering and Aerospace Technology, Vol. 82, No. 6, pp. 376-381, 2010.12.
83. Ki Hoon Park, Bum Soo Yoon, Ngoc Trung Nguyen, Nam Seo Goo, Tae Sam Kang, and Kwang Joon Yoon “Piezo-composite actuated control surface system for flying vehicle,” Aircraft Engineering and Aerospace Technology, Vol. 82, No. 6, pp. 376-381, 2010.12.
83. Ki Hoon Park, Bum Soo Yoon, Ngoc Trung Nguyen, Nam Seo Goo, Tae Sam Kang, and Kwang Joon Yoon “Piezo-composite actuated control surface system for flying vehicle,” Aircraft Engineering and Aerospace Technology, Vol. 82, No. 6, pp. 376-381, 2010.12.
84. Patar Ebenezer Sitorus, Hoon Cheol Park, Doyoung Byun, Nam Seo Goo, Cheol Heui Han, “The Role of Elytra in Beetle Flight: I. Generation of Quasi-Static Aerodynamic Forces,” Journal of Bionic Engineering, Vol. 7, No. 4, pp. 354-363, 2010.12.
84. Patar Ebenezer Sitorus, Hoon Cheol Park, Doyoung Byun, Nam Seo Goo, Cheol Heui Han, “The Role of Elytra in Beetle Flight: I. Generation of Quasi-Static Aerodynamic Forces,” Journal of Bionic Engineering, Vol. 7, No. 4, pp. 354-363, 2010.12.
85(39). Ngoc San Ha, Nam Seo Goo, and Hyeon Kyu Yoon, “Development of a Propulsion System for a Biomimetic Thruster,” Chinese Science Bulletin, Vol. 56, No. 4-5, pp. 432-438, 2011.2. (교내)
85(39). Ngoc San Ha, Nam Seo Goo, and Hyeon Kyu Yoon, “Development of a Propulsion System for a Biomimetic Thruster,” Chinese Science Bulletin, Vol. 56, No. 4-5, pp. 432-438, 2011.2. (교내)
86(40). My Pham and Nam Seo Goo, “Development of a Peristaltic Micropump with Lightweight Piezo-Composite Actuator Memebrane Valves," International Journal of Aeronautical and Space Sciences, Vol. 12, No. 1, pp. 69-77, 2011.3.
86(40). My Pham and Nam Seo Goo, “Development of a Peristaltic Micropump with Lightweight Piezo-Composite Actuator Memebrane Valves," International Journal of Aeronautical and Space Sciences, Vol. 12, No. 1, pp. 69-77, 2011.3.
87. Q T Truong, Q V Nguyen, V T Truong, H C Park, D Y Byun, and N S Goo, “A modified blade element theory for estimation of forces generated by a beetle-mimicking flapping wing system,” Bioinspiration & Biomimetics, Vol. 6 (2011) 036008 (11pp), 2011.9.
87. Q T Truong, Q V Nguyen, V T Truong, H C Park, D Y Byun, and N S Goo, “A modified blade element theory for estimation of forces generated by a beetle-mimicking flapping wing system,” Bioinspiration & Biomimetics, Vol. 6 (2011) 036008 (11pp), 2011.9.
88(41). N S Ha, T L Jin, N S Goo and H C Park, “Anisotropy and non-homogeneity of an Allomyrina Dichotoma beetle hind wing membrane,” Bioinspiration & Biomimetics, Vol. 6 (2011) 046003 (15pp), 2011.12.
88(41). N S Ha, T L Jin, N S Goo and H C Park, “Anisotropy and non-homogeneity of an Allomyrina Dichotoma beetle hind wing membrane,” Bioinspiration & Biomimetics, Vol. 6 (2011) 046003 (15pp), 2011.12.
89(42). Tailie Jin and Nam Seo Goo, “Thermal Strain Measurement of a Double Ring Structure Using Digital Image Correlation Method,” International Journal of Modern Physics B, Vol. 25, No. 31, pp. 4269-4272, 2011.12.
89(42). Tailie Jin and Nam Seo Goo, “Thermal Strain Measurement of a Double Ring Structure Using Digital Image Correlation Method,” International Journal of Modern Physics B, Vol. 25, No. 31, pp. 4269-4272, 2011.12.
90(43). Hung Truyen Luong and Nam Seo Goo, “Use of a Magnetic Force Exciter to Vibrate a Piezocomposite Generating Element in a small-Scale Windmill,” Smart Materials and Structures, Vol. 21, No 2, 025017 (9pp), 2012.2.
90(43). Hung Truyen Luong and Nam Seo Goo, “Use of a Magnetic Force Exciter to Vibrate a Piezocomposite Generating Element in a small-Scale Windmill,” Smart Materials and Structures, Vol. 21, No 2, 025017 (9pp), 2012.2.
91. Jin Hwan Ko, Jihoon Kim, Jongin Hong, Yonghoon Yoo, Youngjong Lee, Tai Lie Jin, Hoon Cheol Park, Nam Seo Goo, and Doyoung Byun, “Micro/nanofabrication for a realistic beetle wing with a superhydrophobic surface,” Bioinspiration & Biomimetics, Vol. 7 (2012) 016011 (8pp), 2012.3.
91. Jin Hwan Ko, Jihoon Kim, Jongin Hong, Yonghoon Yoo, Youngjong Lee, Tai Lie Jin, Hoon Cheol Park, Nam Seo Goo, and Doyoung Byun, “Micro/nanofabrication for a realistic beetle wing with a superhydrophobic surface,” Bioinspiration & Biomimetics, Vol. 7 (2012) 016011 (8pp), 2012.3.
92(44). Van Phuoc Phan, Nam Seo Goo, Kwang Joon Yoon, and Do-Soon Hwang, “Lookup Table Control Method for Vibration Suppression of a Flexible Manipulator with Optimization of the Minimum Settling Time and Energy Consumption,” Asian Journal of Control, Vol. 14, No. 3, pp. 693-706, 2012.5.
92(44). Van Phuoc Phan, Nam Seo Goo, Kwang Joon Yoon, and Do-Soon Hwang, “Lookup Table Control Method for Vibration Suppression of a Flexible Manipulator with Optimization of the Minimum Settling Time and Energy Consumption,” Asian Journal of Control, Vol. 14, No. 3, pp. 693-706, 2012.5.
93(45). N.S. Ha, Q.V. Nguyen, N.S. Goo, and H.C. Park, “Static and Dynamic Characteristics of an Artificial Wing Mimicking an Allomyrina Dichotoma Beetle’s Hind Wing for Flapping-Wing Micro Air Vehicles,” Experimental Mechanics, Vol. 52, No.9, pp. 1535-1549, 2012.11.
93(45). N.S. Ha, Q.V. Nguyen, N.S. Goo, and H.C. Park, “Static and Dynamic Characteristics of an Artificial Wing Mimicking an Allomyrina Dichotoma Beetle’s Hind Wing for Flapping-Wing Micro Air Vehicles,” Experimental Mechanics, Vol. 52, No.9, pp. 1535-1549, 2012.11.
94. Hoang Vu Phan, Quoc Viet Nguyen, Quang Tri Truong, Tien Van Truong, Hoon Cheol Park, Nam Seo Goo, Doyoung Byun, and Min Jun Kim, “Stable Vertical Takeoff of an Insect-Mimicking Flapping-Wing System Without Guide Implementing Inherent Pitching Stability,” Journal of Bionic Engineering, Vol. 9, No.4, pp. 391-401, 2012.12.
94. Hoang Vu Phan, Quoc Viet Nguyen, Quang Tri Truong, Tien Van Truong, Hoon Cheol Park, Nam Seo Goo, Doyoung Byun, and Min Jun Kim, “Stable Vertical Takeoff of an Insect-Mimicking Flapping-Wing System Without Guide Implementing Inherent Pitching Stability,” Journal of Bionic Engineering, Vol. 9, No.4, pp. 391-401, 2012.12.
95. Jinkyo F. Choo, Dong-Ho Ha, Nam Seo Goo, and Won Seo Jang, “Preliminary Tests for a Multi-Functional Bridge Bearing with Built-In Piezoelectric Material,” Advanced Science Letters, Vol. 19, No. 1, pp. 37-41, 2013. 1.
95. Jinkyo F. Choo, Dong-Ho Ha, Nam Seo Goo, and Won Seo Jang, “Preliminary Tests for a Multi-Functional Bridge Bearing with Built-In Piezoelectric Material,” Advanced Science Letters, Vol. 19, No. 1, pp. 37-41, 2013. 1.
96(46). Ngoc San Ha, Tailie Jin, and Nam Seo Goo, “Modal analysis of an artificial wing mimicking an Allomyrina dichotoma beetle’s hind wing for flapping-wing micro airvehicles by noncontact measurement techniques,” Optics and Lasers in Engineering, Vol. 51, No. 5, pp. 560-570, 2013. 5.
96(46). Ngoc San Ha, Tailie Jin, and Nam Seo Goo, “Modal analysis of an artificial wing mimicking an Allomyrina dichotoma beetle’s hind wing for flapping-wing micro airvehicles by noncontact measurement techniques,” Optics and Lasers in Engineering, Vol. 51, No. 5, pp. 560-570, 2013. 5.
97(47). Hung Truyen Luong and Nam Seo Goo, “Performance of multiple energy harvesting elements in a small-scale windmills,” International Journal of Intelligent Unmanned Systems, Vol. 1, No. 3, pp. 215-227, 2013. 7.
97(47). Hung Truyen Luong and Nam Seo Goo, “Performance of multiple energy harvesting elements in a small-scale windmills,” International Journal of Intelligent Unmanned Systems, Vol. 1, No. 3, pp. 215-227, 2013. 7.
98(48). Ngoc San Ha, Quang Tri Truong, Nam Seo Goo, and Hoon Cheol Park, “Relationship between wingbeat frequency and resonant frequency of the wing in insects,” Bioinspiration & Biomimetics, Vol. 8, 046008(12pp), 2013.10.
98(48). Ngoc San Ha, Quang Tri Truong, Nam Seo Goo, and Hoon Cheol Park, “Relationship between wingbeat frequency and resonant frequency of the wing in insects,” Bioinspiration & Biomimetics, Vol. 8, 046008(12pp), 2013.10.
99(49). Ngoc San Ha, Quang Tri Truong, Nam Seo Goo, and Hoon Cheol Park, “Biomechanical properties of insect wings: The stress stiffening effects on the asymmetric bending of the Allomyrina dichotoma beetle’s hind wing,” PLoS One, Vol. 8, issue 12, e80689, pp. 1-10, 2013.12
99(49). Ngoc San Ha, Quang Tri Truong, Nam Seo Goo, and Hoon Cheol Park, “Biomechanical properties of insect wings: The stress stiffening effects on the asymmetric bending of the Allomyrina dichotoma beetle’s hind wing,” PLoS One, Vol. 8, issue 12, e80689, pp. 1-10, 2013.12
100(50). Van Lai Pham, Jun Zhao, Nam Seo Goo, Jae Hyuk Lim, Do-Soon Hwang, and Jung Sun Park, “Landing Stability Simulation of a 1/6 Lunar Module with Aluminum Honeycomb Dampers,” International Journal of Aeronautical and Space Science, Vol. 14, No. 4, pp. 356-368, 2013. 12.
100(50). Van Lai Pham, Jun Zhao, Nam Seo Goo, Jae Hyuk Lim, Do-Soon Hwang, and Jung Sun Park, “Landing Stability Simulation of a 1/6 Lunar Module with Aluminum Honeycomb Dampers,” International Journal of Aeronautical and Space Science, Vol. 14, No. 4, pp. 356-368, 2013. 12.
101(51). Jun Zhao, Nam Seo Goo, and Dong-Ho Ha, “Design and performance evaluation of a d33-mode piezocomposite electricity generating element,” Journal of Mechanical Science and Technology, Vol. 28, No. 1, pp. 15-23, 2014. 1.
101(51). Jun Zhao, Nam Seo Goo, and Dong-Ho Ha, “Design and performance evaluation of a d33-mode piezocomposite electricity generating element,” Journal of Mechanical Science and Technology, Vol. 28, No. 1, pp. 15-23, 2014. 1.
102(52). T. L. Jin, N. S. Ha, and N. S. Goo, “A study of the thermal buckling behavior of a circular aluminum plate using the digital image correlation technique and finite element analysis,” Thin-Walled Structures, Vol. 77, pp. 187-197, 2014.4. (DIC)
102(52). T. L. Jin, N. S. Ha, and N. S. Goo, “A study of the thermal buckling behavior of a circular aluminum plate using the digital image correlation technique and finite element analysis,” Thin-Walled Structures, Vol. 77, pp. 187-197, 2014.4. (DIC)
103(53). Ngoc San Ha, Quang Tri Truong, Hoang Vu Phan, Hoon Cheol Park, and Nam Seo Goo, “Structural Characteristics of Allomyrina Dichotoma Beetle's Hind Wings for Flapping Wing Micro Vehicle,” Journal of Bionic Engineering, Vol. 11, No.2, pp. 226-235, 2014.4.
103(53). Ngoc San Ha, Quang Tri Truong, Hoang Vu Phan, Hoon Cheol Park, and Nam Seo Goo, “Structural Characteristics of Allomyrina Dichotoma Beetle's Hind Wings for Flapping Wing Micro Vehicle,” Journal of Bionic Engineering, Vol. 11, No.2, pp. 226-235, 2014.4.
104(54). JinKyo F. Choo, Van Lai Pham, and Nam Seo Goo, “Design of a d33-mode piezocomposite electricity generating element and its application to bridge monitoring,” Journal of Central South University, Vol. 21, No.7, pp. 2572-2578, 2014.7.
104(54). JinKyo F. Choo, Van Lai Pham, and Nam Seo Goo, “Design of a d33-mode piezocomposite electricity generating element and its application to bridge monitoring,” Journal of Central South University, Vol. 21, No.7, pp. 2572-2578, 2014.7.
105. Jin Ho Cho, Nam Seo Goo, Zhefeng Xuan, Ki Won Yoon, and Han Seo Ko, “Study of flow distribution inside integrated hybrid actuator,” Journal of Mechanical Science and Technology, Vol. 28, No. 9, pp. 3583-3588, 2014. 9.
105. Jin Ho Cho, Nam Seo Goo, Zhefeng Xuan, Ki Won Yoon, and Han Seo Ko, “Study of flow distribution inside integrated hybrid actuator,” Journal of Mechanical Science and Technology, Vol. 28, No. 9, pp. 3583-3588, 2014. 9.
106(55). Van-Lai Pham, Ngoc San Ha, Nam Seo Goo, JinKyo F. Choo, “Effects of cyclic impacts on the performance of a piezo-composite electricity generating element in a d33 mode energy harvesting ,” Journal of Nanoscience and Nanotechnology, Vol. 14, No. 10, pp. 7410-7418, 2014.10.
106(55). Van-Lai Pham, Ngoc San Ha, Nam Seo Goo, JinKyo F. Choo, “Effects of cyclic impacts on the performance of a piezo-composite electricity generating element in a d33 mode energy harvesting ,” Journal of Nanoscience and Nanotechnology, Vol. 14, No. 10, pp. 7410-7418, 2014.10.
107(56). Zhefeng Xuan, Tailie Jin, Ngoc SanHa, Nam Seo Goo, Tae Heun Kim, ByungWoon Bae, Han Seo Ko, and KiWon Yoon, “Performance of piezo-stacks for a piezoelectric hybrid actuator by experiments,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 18, pp. 2212-2220, 2014.12.
107(56). Zhefeng Xuan, Tailie Jin, Ngoc SanHa, Nam Seo Goo, Tae Heun Kim, ByungWoon Bae, Han Seo Ko, and KiWon Yoon, “Performance of piezo-stacks for a piezoelectric hybrid actuator by experiments,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 18, pp. 2212-2220, 2014.12.
108(57). Tailie Jin, Ngoc San Ha, Nam Seo Goo, and Ho Chan Jeon, “Thermal buckling measurement of a laminated composite plate under a uniform temperature distribution using the digital image correlation method,” Composite Structures, Vol. 123, pp. 420-429, 2015.5.
108(57). Tailie Jin, Ngoc San Ha, Nam Seo Goo, and Ho Chan Jeon, “Thermal buckling measurement of a laminated composite plate under a uniform temperature distribution using the digital image correlation method,” Composite Structures, Vol. 123, pp. 420-429, 2015.5.
109(58). Ngoc San Ha, Hoang My Vang, and Nam Seo Goo, “Modal analysis using digital image correlation technique: An application to artificial wing mimicking beetle’s hind wing,” Experimental Mechanics, Vol. 55, No. 5, pp. 989-998, 2015.6.
109(58). Ngoc San Ha, Hoang My Vang, and Nam Seo Goo, “Modal analysis using digital image correlation technique: An application to artificial wing mimicking beetle’s hind wing,” Experimental Mechanics, Vol. 55, No. 5, pp. 989-998, 2015.6.
110(59). Xiao Long Jin, Ngoc San Ha, Yong Zhe Li, Nam Seo Goo, Jangmi Woo, Han Seo Ko, Tae Heun Kim, and Chang Seop Lee, “Experimental Study on the Performance of a Bidirectional Hybrid Piezoelectri-Hydraulic Actuator,” International Journal of Aeronautical and Space Sciences, Vol. 16, No. 4, pp. 520-528, 2015. 12.
110(59). Xiao Long Jin, Ngoc San Ha, Yong Zhe Li, Nam Seo Goo, Jangmi Woo, Han Seo Ko, Tae Heun Kim, and Chang Seop Lee, “Experimental Study on the Performance of a Bidirectional Hybrid Piezoelectri-Hydraulic Actuator,” International Journal of Aeronautical and Space Sciences, Vol. 16, No. 4, pp. 520-528, 2015. 12.
111(60). Tailie Jin, S.H. Lee, and Nam Seo Goo, “Thermal stress measurement of a double ring structure using digital image correlation method,” Experimental Techniques, Vol. 40, No. 1, pp. 195-205, 2016.2.
111(60). Tailie Jin, S.H. Lee, and Nam Seo Goo, “Thermal stress measurement of a double ring structure using digital image correlation method,” Experimental Techniques, Vol. 40, No. 1, pp. 195-205, 2016.2.
112. Jangmi Woo, Nam Seo Goo, Yong Zhe Li, Seung-Hwan Kang, and Han Seo Ko, “A study on flow distribution for integrated hybrid actuator by analysis of reed valve,” Journal of Mechanical Science and Technology, Vol. 30, No. 5, pp. 2069-2074, 2016. 5.
112. Jangmi Woo, Nam Seo Goo, Yong Zhe Li, Seung-Hwan Kang, and Han Seo Ko, “A study on flow distribution for integrated hybrid actuator by analysis of reed valve,” Journal of Mechanical Science and Technology, Vol. 30, No. 5, pp. 2069-2074, 2016. 5.
113(61). Vinh Tung Le, Ngoc San Ha, Tailie Jin, Nam Seo Goo, and Jae Young Kim, “Thermal interaction of a circular plate-ring structure using digital image correlation technique and infrared heating system,” Journal of Mechanical Science and Technology, Vol. 30, No. 9, pp. 4363-4372, 2016. 9.
113(61). Vinh Tung Le, Ngoc San Ha, Tailie Jin, Nam Seo Goo, and Jae Young Kim, “Thermal interaction of a circular plate-ring structure using digital image correlation technique and infrared heating system,” Journal of Mechanical Science and Technology, Vol. 30, No. 9, pp. 4363-4372, 2016. 9.
114(62). Ngoc San Ha, Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Thermal strain measurement of Austin stainless steel (SS304) during a heating-cooling process,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 2, pp. 215-221, 2017.6.
114(62). Ngoc San Ha, Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Thermal strain measurement of Austin stainless steel (SS304) during a heating-cooling process,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 2, pp. 215-221, 2017.6.
115(63). Ngoc San Ha, Vinh Tung Le, and Nam Seo Goo, “Investigation of fracture properties of a piezoelectric stack actuator using the digital image correlation technique,” International Journal of Fatigue, Vol. 101, No. 1, pp. 106-111, 2017.8.
115(63). Ngoc San Ha, Vinh Tung Le, and Nam Seo Goo, “Investigation of fracture properties of a piezoelectric stack actuator using the digital image correlation technique,” International Journal of Fatigue, Vol. 101, No. 1, pp. 106-111, 2017.8.
116(64). Ngoc San Ha, Thanh Duc Dao,Nam Seo Goo, Jae Kwak and Soonwan Jung, “Adhesion Strength Characterization for Different Frame Materials of Handheld Products,” Journal of Mechanical Science and Technology, Vol. 31, No. 10, pp. 4795-4804, 2017.10.
116(64). Ngoc San Ha, Thanh Duc Dao,Nam Seo Goo, Jae Kwak and Soonwan Jung, “Adhesion Strength Characterization for Different Frame Materials of Handheld Products,” Journal of Mechanical Science and Technology, Vol. 31, No. 10, pp. 4795-4804, 2017.10.
117(65). Yongzhe Li, Vinh Tung Le, Nam Seo Goo, Tae Heun Kim, and Chang Seop Lee, “High Actuation Force of Piezoelectric Hybrid Actuator with Multiple Piezoelectric Pump Design,” Journal of Intelligent Material Systems and Structures, Vol. 28, No. 18, pp. 2557-2571, 2017.11.
117(65). Yongzhe Li, Vinh Tung Le, Nam Seo Goo, Tae Heun Kim, and Chang Seop Lee, “High Actuation Force of Piezoelectric Hybrid Actuator with Multiple Piezoelectric Pump Design,” Journal of Intelligent Material Systems and Structures, Vol. 28, No. 18, pp. 2557-2571, 2017.11.
118(66). Ngoc San Ha, Vinh Tung Le, and Nam Seo Goo, “Investigation of punch resistance of the Allomyrira dichtoloma beetle forewing,” Journal of Bionic Engineering, Vol. 15, No. 1, pp. 57-68, 2018.1 (2018 Highly Cited Research Paper, as of 01 July 2021, 16 times cited)
118(66). Ngoc San Ha, Vinh Tung Le, and Nam Seo Goo, “Investigation of punch resistance of the Allomyrira dichtoloma beetle forewing,” Journal of Bionic Engineering, Vol. 15, No. 1, pp. 57-68, 2018.1 (2018 Highly Cited Research Paper, as of 01 July 2021, 16 times cited)
119(67). Thanh Duc Dao, Ngoc San Ha, Nam Seo Goo, and Woong Ryeol Yu, “Design, Fabrication, and Bending Test of Shape Memory Polymer Composite Hinges for Space Deployable Structures,” Journal of Intelligent Material Systems and Structures, Vol. 29, No. 8, pp. 1560-1574, 2018.5
119(67). Thanh Duc Dao, Ngoc San Ha, Nam Seo Goo, and Woong Ryeol Yu, “Design, Fabrication, and Bending Test of Shape Memory Polymer Composite Hinges for Space Deployable Structures,” Journal of Intelligent Material Systems and Structures, Vol. 29, No. 8, pp. 1560-1574, 2018.5
120. Yongsan An, Jinsu Kim, Nam Seo Goo, Yeontae Kim, Jong Kyoo Park and and Woong Ryeol Yu, “Quantitative evaluation of the three-dimensional deployment behavior of a shape memory polymer antenna,” Smart Materials and Structures, Vol. 27, No. 10, 105007 (13pp), 2018.9
120. Yongsan An, Jinsu Kim, Nam Seo Goo, Yeontae Kim, Jong Kyoo Park and and Woong Ryeol Yu, “Quantitative evaluation of the three-dimensional deployment behavior of a shape memory polymer antenna,” Smart Materials and Structures, Vol. 27, No. 10, 105007 (13pp), 2018.9
121(68). Thanh Duc Dao, Nam Seo Goo, and Woong Ryeol Yu, “Blocking Force Measurement of Shape Memory Polymer Composite Hinges For Space Deployable Structures,” Journal of Intelligent Material Systems and Structures, Vol. 29, No. 18, pp. 3367-3678, 2018.11
121(68). Thanh Duc Dao, Nam Seo Goo, and Woong Ryeol Yu, “Blocking Force Measurement of Shape Memory Polymer Composite Hinges For Space Deployable Structures,” Journal of Intelligent Material Systems and Structures, Vol. 29, No. 18, pp. 3367-3678, 2018.11
122. Seok Bin Hong, Joon Hyeok Jang, Haedong Park, Jin-Gyun Kim, Nam Seo Goo and Woong-Ryeol Yu, “Three-dimensional constitutive model of woven fabric-reinforced shape memory polymer composites considering thermal residual stress,” Smart Materials and Structures, Vol. 28, No. 3, 035023 (20pp), 2019.3
122. Seok Bin Hong, Joon Hyeok Jang, Haedong Park, Jin-Gyun Kim, Nam Seo Goo and Woong-Ryeol Yu, “Three-dimensional constitutive model of woven fabric-reinforced shape memory polymer composites considering thermal residual stress,” Smart Materials and Structures, Vol. 28, No. 3, 035023 (20pp), 2019.3
123(69). Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Experimental investigation on thermal contact resistance of alumina fibrous insulation material with Ti-6Al-4V alloy at high temperature and its effective thermal conductivity,” Heat and Mass Transfer, Vol. 55, No. 6, pp. 1705-1721, 2019.6
123(69). Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Experimental investigation on thermal contact resistance of alumina fibrous insulation material with Ti-6Al-4V alloy at high temperature and its effective thermal conductivity,” Heat and Mass Transfer, Vol. 55, No. 6, pp. 1705-1721, 2019.6
124(70). Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Thermo-Mechanical Behavior of a Super-Alloy Thermal Protection System under Aerodynamic Heating,” Journal of Spacecarft and Rockets, Vol. 56, No. 5, pp. 1432-1448, 2019.9
124(70). Vinh Tung Le, Nam Seo Goo, and Jae Young Kim, “Thermo-Mechanical Behavior of a Super-Alloy Thermal Protection System under Aerodynamic Heating,” Journal of Spacecarft and Rockets, Vol. 56, No. 5, pp. 1432-1448, 2019.9
125(71). Van Luong Le, Vinh Tung Le, and Nam Seo Goo, “Deployment performance of shape memory polymer composite hinges at low temperature,” Journal of Intelligent Material Systems and Structures, Vol. 30, No. 17, pp. 2625-2638, 2019.10
125(71). Van Luong Le, Vinh Tung Le, and Nam Seo Goo, “Deployment performance of shape memory polymer composite hinges at low temperature,” Journal of Intelligent Material Systems and Structures, Vol. 30, No. 17, pp. 2625-2638, 2019.10
126(72). Vinh Tung Le, Ngoc San Ha, Nam Seo Goo, and Jae Young Kim, “Insulation system using high-temperature fibrous insulation materials,” Heat Transfer Engineering, Vol. 40, No. 17, pp. 1523-1538, 2019.11
126(72). Vinh Tung Le, Ngoc San Ha, Nam Seo Goo, and Jae Young Kim, “Insulation system using high-temperature fibrous insulation materials,” Heat Transfer Engineering, Vol. 40, No. 17, pp. 1523-1538, 2019.11
127(73). Vinh Tung Le, Ngoc San Ha, and Nam Seo Goo, “Thermal protective properties of the Allomyrina dichotoma beetle forewing for thermal protection systems,” Heat Transfer Engineering, Vol. 40, No. 17, pp. 1539-1549, 2019.11
127(73). Vinh Tung Le, Ngoc San Ha, and Nam Seo Goo, “Thermal protective properties of the Allomyrina dichotoma beetle forewing for thermal protection systems,” Heat Transfer Engineering, Vol. 40, No. 17, pp. 1539-1549, 2019.11
128. Joon Hyeok Jang, Seok Bin Hong, Jin-Kyun Kim, Nam Seo Goo, Hanmin Lee, and Woong-Ryeol Yu, “Long-term properties of carbon fiber-reinforced shape memory epoxy/polymer composites exposed to vacuum and ultraviolet radiation,” Smart Materials and Structures, Vol. 28, No. 11, 115013 (12pp), 2019.3
128. Joon Hyeok Jang, Seok Bin Hong, Jin-Kyun Kim, Nam Seo Goo, Hanmin Lee, and Woong-Ryeol Yu, “Long-term properties of carbon fiber-reinforced shape memory epoxy/polymer composites exposed to vacuum and ultraviolet radiation,” Smart Materials and Structures, Vol. 28, No. 11, 115013 (12pp), 2019.3
129(74). Vinh Tung Le and Nam Seo Goo, “Thermomechanical performance of bio-inspired corrugated-core sandwich structure for a thermal protection system panel,” Applied Sciences, Vol. 9, 5541 (24pp), 2019.12
129(74). Vinh Tung Le and Nam Seo Goo, “Thermomechanical performance of bio-inspired corrugated-core sandwich structure for a thermal protection system panel,” Applied Sciences, Vol. 9, 5541 (24pp), 2019.12
130(75). Taijun Zhao, Vinh Tung Le and Nam Seo Goo, “Global-local deformation measurement of stress concentration structures using a multi-digital image correlation system,” Journal of Mechanical Science and Technology, Vol. 34, No. 4, pp. 1655-1665, 2020.04
130(75). Taijun Zhao, Vinh Tung Le and Nam Seo Goo, “Global-local deformation measurement of stress concentration structures using a multi-digital image correlation system,” Journal of Mechanical Science and Technology, Vol. 34, No. 4, pp. 1655-1665, 2020.04
131(76). Vinh Tung Le and Nam Seo Goo, “Dynamic Characteristics and Damage Detection of a Metallic Thermal Protection System Panel Using a Three-Dimensional Point Tracking Method and a Modal Assurance Criterion,” Sensors, 20-07185 (24 pp), 2020.12
131(76). Vinh Tung Le and Nam Seo Goo, “Dynamic Characteristics and Damage Detection of a Metallic Thermal Protection System Panel Using a Three-Dimensional Point Tracking Method and a Modal Assurance Criterion,” Sensors, 20-07185 (24 pp), 2020.12
132. Joon-Hyeok Jang, Seok-Bin Hong, Jin-Gyun Kim, Nam Seo Goo, and Woong-Ryeol Yu, “Accelerated Testing Method for Predicting Long-Term Properties of Carbon Fiber-Reinforced Shape Memory Polymer Composites in a Low Earth Orbit Environment,” Polymers, Vol. 13, 1628 (18 pp), 2021.5
132. Joon-Hyeok Jang, Seok-Bin Hong, Jin-Gyun Kim, Nam Seo Goo, and Woong-Ryeol Yu, “Accelerated Testing Method for Predicting Long-Term Properties of Carbon Fiber-Reinforced Shape Memory Polymer Composites in a Low Earth Orbit Environment,” Polymers, Vol. 13, 1628 (18 pp), 2021.5
133(77). Vinh Tung Le and Nam Seo Goo, “Design, Fabrication, and Testing of a Metallic Thermal Protection Systems for Spaceplane Vehicles,” Journal of Spacecraft and Rockets, Vol. 58, No. 4, pp. 1043-1060, 2021.7
133(77). Vinh Tung Le and Nam Seo Goo, “Design, Fabrication, and Testing of a Metallic Thermal Protection Systems for Spaceplane Vehicles,” Journal of Spacecraft and Rockets, Vol. 58, No. 4, pp. 1043-1060, 2021.7
134(78). Vinh Tung Le, Ngoc San Ha, and Nam Seo Goo, “Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review,” Composites Part B , Vol. 226, pp. 109301, 2021.12
134(78). Vinh Tung Le, Ngoc San Ha, and Nam Seo Goo, “Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review,” Composites Part B , Vol. 226, pp. 109301, 2021.12
135(79). Nguyen Vu Doan, Vinh Tung Le, Hoon Cheol Park, and Nam Seo Goo, “Modal analysis using a virtual speckle pattern based digital image correlation method: an application for an artificial flapping wing,” Experimental Mechanics, Vol. 62, No. 2, pp. 253-270, 2022.2
135(79). Nguyen Vu Doan, Vinh Tung Le, Hoon Cheol Park, and Nam Seo Goo, “Modal analysis using a virtual speckle pattern based digital image correlation method: an application for an artificial flapping wing,” Experimental Mechanics, Vol. 62, No. 2, pp. 253-270, 2022.2
136(80). Van Luong Le, Yiyuan Liu, and Nam Seo Goo, “A three-heating element design with a temperature control and its size optimization for shape memory polymer composite hinges,” Advanced Composite Materials, Vol. 31, No. 1, pp. 62-85, 2022.03
136(80). Van Luong Le, Yiyuan Liu, and Nam Seo Goo, “A three-heating element design with a temperature control and its size optimization for shape memory polymer composite hinges,” Advanced Composite Materials, Vol. 31, No. 1, pp. 62-85, 2022.03
137(81). Vinh Tung Le, Tailie Jin, and Nam Seo Goo, “Mechanical behaviors and fracture mechanisms of CFRP sandwich composite structures with bio-inspired thin-walled corrugated cores,” Aerospace Science and Technology, Vol. 126, 107599 (19 pp), 2022.05
137(81). Vinh Tung Le, Tailie Jin, and Nam Seo Goo, “Mechanical behaviors and fracture mechanisms of CFRP sandwich composite structures with bio-inspired thin-walled corrugated cores,” Aerospace Science and Technology, Vol. 126, 107599 (19 pp), 2022.05
138(82). Ruihai Xin, Vinh Tung Le, and Nam Seo Goo, “Buckling Identification in Composite Cylindrical Shells with measured Imperfections using a Multi-DIC Method and Finite Element Analysis,” Thin-Walled Structures, Vol. 177, 109436 (16 pp), 2022.08
138(82). Ruihai Xin, Vinh Tung Le, and Nam Seo Goo, “Buckling Identification in Composite Cylindrical Shells with measured Imperfections using a Multi-DIC Method and Finite Element Analysis,” Thin-Walled Structures, Vol. 177, 109436 (16 pp), 2022.08
139(83). Feng Quan, Rui Hai Xin, and Nam Seo Goo, “Material Property Measurement of 3D Printed Carbon Fiber Composite Using a Digital Image Correlation Method,” Lecture Notes in Electrical Engineering, Vol. 912, pp. 777-790, 2022.09
139(83). Feng Quan, Rui Hai Xin, and Nam Seo Goo, “Material Property Measurement of 3D Printed Carbon Fiber Composite Using a Digital Image Correlation Method,” Lecture Notes in Electrical Engineering, Vol. 912, pp. 777-790, 2022.09
140(84). Nguyen Vu Doan · Nam Seo Goo · Younghun Ko · Seunghwan Seo, and Moonkyung Chung, “Design and Analysis of Micro-Vibration Isolation System for Digital Image Correlation (DIC) System-Based Structural Health Monitoring,” International Journal of Aeronautical and Space Sciences, Vol. 23, No. 4, pp. 711-722, 2022.09
140(84). Nguyen Vu Doan · Nam Seo Goo · Younghun Ko · Seunghwan Seo, and Moonkyung Chung, “Design and Analysis of Micro-Vibration Isolation System for Digital Image Correlation (DIC) System-Based Structural Health Monitoring,” International Journal of Aeronautical and Space Sciences, Vol. 23, No. 4, pp. 711-722, 2022.09
141(85). Ruihai Xin, Vinh Tung Le, and Nam Seo Goo, “Prediction of the buckling mode of cylindrical composite shells with imperfections using FEM-based deep learning approach,” Advanced Composite Materials, Vol. 2, No. 33, pp. 189-211, 2024.03
141(85). Ruihai Xin, Vinh Tung Le, and Nam Seo Goo, “Prediction of the buckling mode of cylindrical composite shells with imperfections using FEM-based deep learning approach,” Advanced Composite Materials, Vol. 2, No. 33, pp. 189-211, 2024.03
142(86). Sengmin Han and Nam Seo Goo, “High-Temperature DIC Deformation Measurement under High-Intensity Blackbody Radiation,” Aerospace, Vol. 6, No. 11, pp. 479, 2024.06
142(86). Sengmin Han and Nam Seo Goo, “High-Temperature DIC Deformation Measurement under High-Intensity Blackbody Radiation,” Aerospace, Vol. 6, No. 11, pp. 479, 2024.06
ISSN #. SMS: 0964-1726, JIMSS: 1045-389X, AST: 1270-9638, JoA: 0021-8669 KEM: 1013-9826, S&AA: 0924-4247, COMST: 0266-3538, JMST: 1738-494X, JKPS: 0374-4884, JoB: 1672-6529, JoEC: 1385-3449, IJCAS: 1598-6446, CSB: 1001-6538, IJMPB: 0217-9792, AEAT: 1748-8842, AJC: 1561-8625, IJASS: 2093-274x, BandB: 1748-3182, EM: 0014-8451, OLED: 0143-8166, IJIUS:2049-6427, ASL: 1936-6612, PloSOne: 1932-6203, JNN: 1533-4880, TWS: 0263-8231, EXT: 0732-8818, JCSU: 2095-2899, HTE: 0145-7632, IJFatigue: 0142-1123, JBionic Engineering: 1672-6529, HeatandMassTransfer: 0947-7411, Journal of Spacecraft and Rockets: 0022-4650, Applied Scicenses: 2076-3417, Sensors: 1424-8220, Advanced Composite Materials: 0924-3046, Composites Part B: 1359-8368, Polymers: 2073-4360
ISSN #. SMS: 0964-1726, JIMSS: 1045-389X, AST: 1270-9638, JoA: 0021-8669 KEM: 1013-9826, S&AA: 0924-4247, COMST: 0266-3538, JMST: 1738-494X, JKPS: 0374-4884, JoB: 1672-6529, JoEC: 1385-3449, IJCAS: 1598-6446, CSB: 1001-6538, IJMPB: 0217-9792, AEAT: 1748-8842, AJC: 1561-8625, IJASS: 2093-274x, BandB: 1748-3182, EM: 0014-8451, OLED: 0143-8166, IJIUS:2049-6427, ASL: 1936-6612, PloSOne: 1932-6203, JNN: 1533-4880, TWS: 0263-8231, EXT: 0732-8818, JCSU: 2095-2899, HTE: 0145-7632, IJFatigue: 0142-1123, JBionic Engineering: 1672-6529, HeatandMassTransfer: 0947-7411, Journal of Spacecraft and Rockets: 0022-4650, Applied Scicenses: 2076-3417, Sensors: 1424-8220, Advanced Composite Materials: 0924-3046, Composites Part B: 1359-8368, Polymers: 2073-4360
International Conference
International Conference
국제 학술대회
1. Seung Jo Kim, Hae Kyung Lee, Nam Seo Goo and Eui Sup Shin, "Fuzzy Optimal Design of Composite Plates Using Finite Element Method," Proceedings of 2nd Joint Japan-U.S.A. Conference of Adaptive Structures (Nagoya, Japan, Nov. 1991), edited by Y. Matsuzaki and B.K. Wada, Technomic Publishing Co., pp. 847-854, 1992.
1. Seung Jo Kim, Hae Kyung Lee, Nam Seo Goo and Eui Sup Shin, "Fuzzy Optimal Design of Composite Plates Using Finite Element Method," Proceedings of 2nd Joint Japan-U.S.A. Conference of Adaptive Structures (Nagoya, Japan, Nov. 1991), edited by Y. Matsuzaki and B.K. Wada, Technomic Publishing Co., pp. 847-854, 1992.
2. Nam Seo Goo, Hyung Joo Kim, Jeoung Yeol Yu and Seung Jo Kim, "Low-Velocity Impact Analysis of Laminated Composite Plates Considering Stiffness Degradation," Proceedings of 2nd International Conference on Composites Engineering (New Orleans, US, Aug. 1995), pp. 261-262
2. Nam Seo Goo, Hyung Joo Kim, Jeoung Yeol Yu and Seung Jo Kim, "Low-Velocity Impact Analysis of Laminated Composite Plates Considering Stiffness Degradation," Proceedings of 2nd International Conference on Composites Engineering (New Orleans, US, Aug. 1995), pp. 261-262
3. Nam Seo Goo, Seung Jo Kim and Sung Nam Jung, "Dynamic Contact Analysis of Laminated Composite Plate Under Low-Velocity Impact," Proceedings of 37th SDM Conference(Salt Lake City, UT, US, Apr. 1996), pp. 776-786 (AIAA Paper 96-1405)
3. Nam Seo Goo, Seung Jo Kim and Sung Nam Jung, "Dynamic Contact Analysis of Laminated Composite Plate Under Low-Velocity Impact," Proceedings of 37th SDM Conference(Salt Lake City, UT, US, Apr. 1996), pp. 776-786 (AIAA Paper 96-1405)
4. Seung Jo Kim, Seung Woo Choi, Nam Seo Goo and Jong Gye Shin, "Parametric Study on Dynamic Contact Behaviors of Laminated Composite Panels", U.S.-Pacific Rim Workshop on Composite Materials for Ship and Offshore Structures, East West Center, Honolulu, Hawaii, USA, 7-9 April, 1998.
4. Seung Jo Kim, Seung Woo Choi, Nam Seo Goo and Jong Gye Shin, "Parametric Study on Dynamic Contact Behaviors of Laminated Composite Panels", U.S.-Pacific Rim Workshop on Composite Materials for Ship and Offshore Structures, East West Center, Honolulu, Hawaii, USA, 7-9 April, 1998.
5. Nam Seo Goo, Cheol Kim, Hoon Cheol Park and Kwang Joon Yoon, "Performance Evaluation and Optimal Design of LIghtweight Piezo-composite Curved Actuator," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
5. Nam Seo Goo, Cheol Kim, Hoon Cheol Park and Kwang Joon Yoon, "Performance Evaluation and Optimal Design of LIghtweight Piezo-composite Curved Actuator," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
6. Kwang Joon Yoon, Jae Han Jung, Hoon Cheol Park, and Nam Seo Goo, "Thermal Deformation and Residual Stress Analysis of Lightweight Piezocomposite Curved Actuator," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
6. Kwang Joon Yoon, Jae Han Jung, Hoon Cheol Park, and Nam Seo Goo, "Thermal Deformation and Residual Stress Analysis of Lightweight Piezocomposite Curved Actuator," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
7. Hoon Cheol Park, Sangki Lee, Byung Chan Cho, Kwang Joon Yoon, and Nam Seo Goo, "Three-dimensional Assumed Strain Solid Element for Piezoelectric Actuator/Sensor Analysis," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
7. Hoon Cheol Park, Sangki Lee, Byung Chan Cho, Kwang Joon Yoon, and Nam Seo Goo, "Three-dimensional Assumed Strain Solid Element for Piezoelectric Actuator/Sensor Analysis," Proceeding of SPIE's 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4-8 March, 2001.
8. Cheol Kim, Bum-Sik Park, and Nam Seo Goo, "The Bending and Twisting Control of SMA/Graphite/Epoxy Composite Beams," Proceeding of 13th ICCM Conferences, China, June, 2001.
8. Cheol Kim, Bum-Sik Park, and Nam Seo Goo, "The Bending and Twisting Control of SMA/Graphite/Epoxy Composite Beams," Proceeding of 13th ICCM Conferences, China, June, 2001.
9. Young-Doo Kwon, Nam Seo Goo, Sang Mok Shin, Chan Bok Lee, "Finite Element Analyses of Long Cylinder Problems Using Compatible/Incompatible Elements," Proceeding of 2001 Mechanics and Materials Summer Conference, San Diego, USA, June, 2001.
9. Young-Doo Kwon, Nam Seo Goo, Sang Mok Shin, Chan Bok Lee, "Finite Element Analyses of Long Cylinder Problems Using Compatible/Incompatible Elements," Proceeding of 2001 Mechanics and Materials Summer Conference, San Diego, USA, June, 2001.
10. Nam Seo Goo, Young-Doo Kwon, Soon Bum Kwon, Seung Bo Jin, Sang Woo Choo, "Convergence Enhanced Algorithm with Successive Zooming Method for Solving Continuous Optimization Problems," Proceeding of 2001 Mechanics and Materials Summer Conference, San Diego, USA, June, 2001.
10. Nam Seo Goo, Young-Doo Kwon, Soon Bum Kwon, Seung Bo Jin, Sang Woo Choo, "Convergence Enhanced Algorithm with Successive Zooming Method for Solving Continuous Optimization Problems," Proceeding of 2001 Mechanics and Materials Summer Conference, San Diego, USA, June, 2001.
11. G. S. Kim, Y. D. Kwon, N. S. Goo, and M. H. Cho, “Finite Element Modelling of Structure with Bolted Joints and Dynamic Analysis Considering Pressure Cone Angle,” Proceeding of 4th international Conference on Mechanics and Materials in Design, Nagoya, Japan, June, 2002.
11. G. S. Kim, Y. D. Kwon, N. S. Goo, and M. H. Cho, “Finite Element Modelling of Structure with Bolted Joints and Dynamic Analysis Considering Pressure Cone Angle,” Proceeding of 4th international Conference on Mechanics and Materials in Design, Nagoya, Japan, June, 2002.
12. H. J. Kim, N. S. Goo, Y. D. Kwon, and C. W. Ha, “Structural Analysis of Dae-dong Agricultural Tractor Cabin for OECD Certification,” Proceeding of 4th international Conference on Mechanics and Materials in Design, Nagoya, Japan, June, 2002.
12. H. J. Kim, N. S. Goo, Y. D. Kwon, and C. W. Ha, “Structural Analysis of Dae-dong Agricultural Tractor Cabin for OECD Certification,” Proceeding of 4th international Conference on Mechanics and Materials in Design, Nagoya, Japan, June, 2002.
13. N. S. Goo, Y. D. Kwon, G. S. Kim, H. J. Kim and K. J. Yoon, “A Parametric Study to Determine Behaviour of LIPCA Actuators,” Proceeding of 1st International Conference on Mechatronics, Linz, Austria, July, 2002.
13. N. S. Goo, Y. D. Kwon, G. S. Kim, H. J. Kim and K. J. Yoon, “A Parametric Study to Determine Behaviour of LIPCA Actuators,” Proceeding of 1st International Conference on Mechatronics, Linz, Austria, July, 2002.
14. K. Woo and N. S. Goo, “Thermal Conductivity of Carbon/Phenolic 8-Harness Satin Weave Composites,” Proceedings of 3rd Japan-Korea Joint Symposium on Composite Materials, Yamaguchi, Japan, 10 Oct., 2002.
14. K. Woo and N. S. Goo, “Thermal Conductivity of Carbon/Phenolic 8-Harness Satin Weave Composites,” Proceedings of 3rd Japan-Korea Joint Symposium on Composite Materials, Yamaguchi, Japan, 10 Oct., 2002.
15. K.Y. Kim, K.H. Park, N. S. Goo, H.C. Park, and K.J. Yoon, “Fatigue Characteristics of Lightweight Piezo-Composite Actuator LIPCA,” Proceeding of SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 2-6 March, 2003.(5056-46)
15. K.Y. Kim, K.H. Park, N. S. Goo, H.C. Park, and K.J. Yoon, “Fatigue Characteristics of Lightweight Piezo-Composite Actuator LIPCA,” Proceeding of SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 2-6 March, 2003.(5056-46)
16. Sang Min Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, “Design and Demonstration of a biomimetic wing section using Lightweight Piezoceramic Composite Actuator (LIPCA),” Proceeding of SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 2-6 March, 2003. (5056-21)
16. Sang Min Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, “Design and Demonstration of a biomimetic wing section using Lightweight Piezoceramic Composite Actuator (LIPCA),” Proceeding of SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 2-6 March, 2003. (5056-21)
17. K.H. Park, N.S. Goo, H.C. Park, K.J. Yoon,Y.H. Byun, “Design and Test of Power System for a Reduced-scale Tip-jet Rotor Using a Small Turbo-Jet Engine,” Proceeding of AIAA 2nd Unmanned and Unlimited Technical Conference, San Diego, CA, USA, Septempber 15-18, 2003. (AIAA Paper # 2003-6570)
17. K.H. Park, N.S. Goo, H.C. Park, K.J. Yoon,Y.H. Byun, “Design and Test of Power System for a Reduced-scale Tip-jet Rotor Using a Small Turbo-Jet Engine,” Proceeding of AIAA 2nd Unmanned and Unlimited Technical Conference, San Diego, CA, USA, Septempber 15-18, 2003. (AIAA Paper # 2003-6570)
18. Hee Chul Hwang, Jong Hyun Kim, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon, “Application of LIPCA Actuator in Micro Air Vehicle,” Proceeding of 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, 7-9 Oct. 2003, p. 90.
18. Hee Chul Hwang, Jong Hyun Kim, Nam Seo Goo, Hoon Cheol Park, Kwang Joon Yoon, “Application of LIPCA Actuator in Micro Air Vehicle,” Proceeding of 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, 7-9 Oct. 2003, p. 90.
19. Sang Min Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, “Morphing Section Design and Demonstration using Lightweight Piezoceramic Composite Actuator(LIPCA),” Proceeding of 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, 7-9 Cct. 2003, p. 91.
19. Sang Min Lim, Sangki Lee, Hoon Cheol Park, Kwang Joon Yoon, Nam Seo Goo, “Morphing Section Design and Demonstration using Lightweight Piezoceramic Composite Actuator(LIPCA),” Proceeding of 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, 7-9 Cct. 2003, p. 91.
20. Nam Seo Goo, Kyun Youl Kim, Hoon Cheol Park, Kwang Joon Yoon, “Analysis and Failure Prediction of Tape-Wrapped Structures,” Proceeding of 5th International Conference on Fracture and Strength of Solids, Sendai, Japan, 20-22 Oct., 2003, p. 178.
20. Nam Seo Goo, Kyun Youl Kim, Hoon Cheol Park, Kwang Joon Yoon, “Analysis and Failure Prediction of Tape-Wrapped Structures,” Proceeding of 5th International Conference on Fracture and Strength of Solids, Sendai, Japan, 20-22 Oct., 2003, p. 178.
21. Yanti Rachmadini, Young Sung Kim, Sang Ki Lee, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Effect of Coupling Stiffness on Behavior of Piezo-Actuator/Sensor Embedded Structures,” Proceeding of International Conference on Materials for Advanced Technologies, Singapore, 7-12 Dec., 2003, p. .
21. Yanti Rachmadini, Young Sung Kim, Sang Ki Lee, Hoon Cheol Park, Nam Seo Goo, Kwang Joon Yoon,“Effect of Coupling Stiffness on Behavior of Piezo-Actuator/Sensor Embedded Structures,” Proceeding of International Conference on Materials for Advanced Technologies, Singapore, 7-12 Dec., 2003, p. .
22. N.S. Goo, I. H. Paik, K.J. Yoon, Y.C. Jung, and J.W. Cho, “Actuation of MAV Control Surface using Shape Memeory Polymer Actuator,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-22)
22. N.S. Goo, I. H. Paik, K.J. Yoon, Y.C. Jung, and J.W. Cho, “Actuation of MAV Control Surface using Shape Memeory Polymer Actuator,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-22)
23. Y.C. Jung, N.S. Goo, and J.W. Cho, “Electrically Conducting Shape Memory Polymer Composites for Electro-Active Actuator,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5385-30)
23. Y.C. Jung, N.S. Goo, and J.W. Cho, “Electrically Conducting Shape Memory Polymer Composites for Electro-Active Actuator,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5385-30)
24. H.C. Park, S.Y. Lee, S.M. Lim, S. Lee, N.S. Goo, and K.J. Yoon, “Design and Demonstration Flapping Wing Device Powered by LIPCA,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-25)
24. H.C. Park, S.Y. Lee, S.M. Lim, S. Lee, N.S. Goo, and K.J. Yoon, “Design and Demonstration Flapping Wing Device Powered by LIPCA,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-25)
25. G. Kim, J.D. Lee, N.S. Goo, H.C. Park, and K.J. Yoon, “Development of Stacked Ceramic Thin Actuation Layer IDEAL Using Interdigitated Electrodes,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-55)
25. G. Kim, J.D. Lee, N.S. Goo, H.C. Park, and K.J. Yoon, “Development of Stacked Ceramic Thin Actuation Layer IDEAL Using Interdigitated Electrodes,” Proceeding of SPIE's 11th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 14-18 March, 2004. (5390-55)
26. H.C. Park, K.J. Kim, Sangki Lee, Seung Yeop Lee, Young Joo Cha, K.J. Yoon, and N.S. Goo, “Biomimetic Flapping Devices Powered by Artificial Muscle Actuators,” Proceeding of 2004 US-Korea Conference on Science, Technology and Entrepreneurship, Durham, NC, USA, August 12-14, 2004.
26. H.C. Park, K.J. Kim, Sangki Lee, Seung Yeop Lee, Young Joo Cha, K.J. Yoon, and N.S. Goo, “Biomimetic Flapping Devices Powered by Artificial Muscle Actuators,” Proceeding of 2004 US-Korea Conference on Science, Technology and Entrepreneurship, Durham, NC, USA, August 12-14, 2004.
27. G.B. Kim, I.H. Paik, K.J. Yoon, H.C. Park, and N.S. Goo, “Manufacturing and Performance Test of Rotary-wing Type Micro Aerial Vehicle,” Proceeding of AIAA 3rd Unmanned and Unlimited Technical Conference, Chicago, IL, USA, Septempber 20-23, 2004. (AIAA Paper # 2004-6333)
27. G.B. Kim, I.H. Paik, K.J. Yoon, H.C. Park, and N.S. Goo, “Manufacturing and Performance Test of Rotary-wing Type Micro Aerial Vehicle,” Proceeding of AIAA 3rd Unmanned and Unlimited Technical Conference, Chicago, IL, USA, Septempber 20-23, 2004. (AIAA Paper # 2004-6333)
28. A. Suhariyono, J.H. Kim, H.C. Hwang, N.S. Goo, H.C. Park, and K.J. Yoon, “Design of Aerodynamic Performance Measurement System for Micro Air Vehicles,” Proceeding of KSAS-JSASS Joint Symposium on Aerospace Engineering, Seoul, Korea, November 18-19, 2004., pp. 239-246
28. A. Suhariyono, J.H. Kim, H.C. Hwang, N.S. Goo, H.C. Park, and K.J. Yoon, “Design of Aerodynamic Performance Measurement System for Micro Air Vehicles,” Proceeding of KSAS-JSASS Joint Symposium on Aerospace Engineering, Seoul, Korea, November 18-19, 2004., pp. 239-246
29. I.H. Paik, N.S. Goo, Y.C. Jung, and J.W. Cho, “Actuation Performance of Conducting Shape Memory Polyurethane Actuators,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005.(5764-03)
29. I.H. Paik, N.S. Goo, Y.C. Jung, and J.W. Cho, “Actuation Performance of Conducting Shape Memory Polyurethane Actuators,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005.(5764-03)
30. M. Syaifuddin, H.C. Park, N.S. Goo, and K.J. Yoon, “Design and Evaluation of LIPCA Actuated Flapping Device,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5764-18)
30. M. Syaifuddin, H.C. Park, N.S. Goo, and K.J. Yoon, “Design and Evaluation of LIPCA Actuated Flapping Device,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5764-18)
31. Hery Setiyawan, N.S. Goo, H.C. Park, and K.J. Yoon, “Degradation Prediction of Piezocomposite Actuator,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5761-31)
31. Hery Setiyawan, N.S. Goo, H.C. Park, and K.J. Yoon, “Degradation Prediction of Piezocomposite Actuator,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5761-31)
32. Y. Heryawan, H.C. Park, N.S. Goo, K.J. Yoon and Y.H. Byun, “Design and Demonstration of a Small Expandable Morphing Wing,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5764-26)
32. Y. Heryawan, H.C. Park, N.S. Goo, K.J. Yoon and Y.H. Byun, “Design and Demonstration of a Small Expandable Morphing Wing,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5764-26)
33. A. Suhariyono, N.S. Goo, H.C. Park, and K.J. Yoon, “Application of LIPCA as Smart Actuator for Active Vibration Control of Dynamic Structures,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5760-57)
33. A. Suhariyono, N.S. Goo, H.C. Park, and K.J. Yoon, “Application of LIPCA as Smart Actuator for Active Vibration Control of Dynamic Structures,” Proceeding of SPIE's 12th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2005. (5760-57)
34. A. Suhariyono, N.S. Goo, H.C. Park, and K.J. Yoon, “Application of LIPCA to for Active Vibration Control of Beam,” Proceeding of 16th International Conference on Adaptive Structures and Technologies, Paris, France, 9-12, Oct., 2005.
34. A. Suhariyono, N.S. Goo, H.C. Park, and K.J. Yoon, “Application of LIPCA to for Active Vibration Control of Beam,” Proceeding of 16th International Conference on Adaptive Structures and Technologies, Paris, France, 9-12, Oct., 2005.
35. I.L. Paik, N.S. Goo, Y.C. Jung and J.W. Cho, “Fatigue Property of a Conducting Shape Memory Polyurethane Actuators,” Proceeding of SPIE's 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 26 Feb.-22 March, 2006. (6173-07)
35. I.L. Paik, N.S. Goo, Y.C. Jung and J.W. Cho, “Fatigue Property of a Conducting Shape Memory Polyurethane Actuators,” Proceeding of SPIE's 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 26 Feb.-22 March, 2006. (6173-07)
36. T. Nguyen, N.S. Goo, K.J. Yoon and Y.S. Yoon, “A Novel Lightweight Piezo-composite Actuator Micropump,” Proceeding of SPIE's 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 26 Feb.-2 March, 2006. (6172-38)
36. T. Nguyen, N.S. Goo, K.J. Yoon and Y.S. Yoon, “A Novel Lightweight Piezo-composite Actuator Micropump,” Proceeding of SPIE's 13th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 26 Feb.-2 March, 2006. (6172-38)
37. Landong Martua, Seok Heo, and Nam Seo Goo, “Application of a LIPCA for the Structural Vibration Suppression of a Flexible Beam with a Tip Mass,” Proceeding of 8th International Conference on Motion and Vibration Control, Daejeon, Korea, 27-30 August, 2006, pp. 748-753.
37. Landong Martua, Seok Heo, and Nam Seo Goo, “Application of a LIPCA for the Structural Vibration Suppression of a Flexible Beam with a Tip Mass,” Proceeding of 8th International Conference on Motion and Vibration Control, Daejeon, Korea, 27-30 August, 2006, pp. 748-753.
38. Thanh Tung Nguyen and Nam Seo Goo, “Development of an IPMC-Driven Micropump,” Proceeding of International Conference of INABIO/SMEBA 2006, Daejeon, Korea, 21-23 September, 2006, pp. 365-370.
38. Thanh Tung Nguyen and Nam Seo Goo, “Development of an IPMC-Driven Micropump,” Proceeding of International Conference of INABIO/SMEBA 2006, Daejeon, Korea, 21-23 September, 2006, pp. 365-370.
39. Landong Martua, N.S. Goo, and Seok Heo, “Application of a LIPCA for the Structural Vibration Suppression of a Flexible Beam with a Tip Mass: Experiments and Simulations,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
39. Landong Martua, N.S. Goo, and Seok Heo, “Application of a LIPCA for the Structural Vibration Suppression of a Flexible Beam with a Tip Mass: Experiments and Simulations,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
40. Thanh Tung Nguyen, Vinh Khanh Nguyen, and N.S. Goo, “Robust Design of a Flap Valve Micropump with Ionic Polymer-Metal Composite Actuator,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
40. Thanh Tung Nguyen, Vinh Khanh Nguyen, and N.S. Goo, “Robust Design of a Flap Valve Micropump with Ionic Polymer-Metal Composite Actuator,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
41. N.S. Goo, I.L. Paik, Y.C. Jung, and J.W. Cho, “Durability of a Conducting Shape Memory Polyurethane Actuator,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
41. N.S. Goo, I.L. Paik, Y.C. Jung, and J.W. Cho, “Durability of a Conducting Shape Memory Polyurethane Actuator,” Proceeding of 17th International Conference on Adaptive Structures and Technologies, Taipei, Taiwan, 17-19, Oct., 2006.
42. Landong Martua, Seok Heo, and N.S. Goo, “Application of a LIPCA for the Structural Vibration Suppresion of a Flexible Beam with a Tip Mass: Experiments and Simulations,” Proceeding of 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 6-10, Nov., 2006, pp. 430-435.
42. Landong Martua, Seok Heo, and N.S. Goo, “Application of a LIPCA for the Structural Vibration Suppresion of a Flexible Beam with a Tip Mass: Experiments and Simulations,” Proceeding of 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 6-10, Nov., 2006, pp. 430-435.
43. Thanh Tung Nguyen, Vinh Khanh Nguyen, and N.S. Goo, “A Novel Polymeric Micropump based on a Multilayered Ionic Polymer-Metal Composite,” Proceeding of 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 6-10, Nov., 2006, pp. 4888-4893.
43. Thanh Tung Nguyen, Vinh Khanh Nguyen, and N.S. Goo, “A Novel Polymeric Micropump based on a Multilayered Ionic Polymer-Metal Composite,” Proceeding of 32nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, 6-10, Nov., 2006, pp. 4888-4893.
44. Q.V. Nguyen, H.C. Park, and N.S. Goo, “Enhancement of a unimorph actuator performance implementing the nonlinear characteristics of piezoceramic wafer (3203HD, CTS),” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6529-04)
44. Q.V. Nguyen, H.C. Park, and N.S. Goo, “Enhancement of a unimorph actuator performance implementing the nonlinear characteristics of piezoceramic wafer (3203HD, CTS),” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6529-04)
45. H.C. Park, S. Heo, N. Goo, and T. Wiguna, “Experiment and parametric study of an improved biomimetic robot fish actuated by piezoelectric actuators,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6525-26)
45. H.C. Park, S. Heo, N. Goo, and T. Wiguna, “Experiment and parametric study of an improved biomimetic robot fish actuated by piezoelectric actuators,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6525-26)
46. B. Smith, K.M. Mossi, and N.S. Goo,, “Experimental development of power consumption in LIPCA-C2,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6526-56)
46. B. Smith, K.M. Mossi, and N.S. Goo,, “Experimental development of power consumption in LIPCA-C2,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6526-56)
46. G. Li, N.S. Goo, and D.Y. Byun, “Electro-Fluid-Structural Interaction Simulation of a Valveless Micropump,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6528-17)
46. G. Li, N.S. Goo, and D.Y. Byun, “Electro-Fluid-Structural Interaction Simulation of a Valveless Micropump,” Proceeding of SPIE's 14th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 18-22, March, 2007. (6528-17)
47. G. Li and N.S. Goo, “Performance Evaluation of a Valveless Micropump Considering Electro-Structural-Fluid Interaction,” Proceeding of 10th International Conference on The Mechanical Behavior of Materials, Busan, Korea, 27-30, May, 2007.
47. G. Li and N.S. Goo, “Performance Evaluation of a Valveless Micropump Considering Electro-Structural-Fluid Interaction,” Proceeding of 10th International Conference on The Mechanical Behavior of Materials, Busan, Korea, 27-30, May, 2007.
48. N.S. Goo and Van Phuoc Phan, “Vibration Suppression of a Flexible Manipulator using LIPCA Actuator,” Proceeding of 18th International Conference on Adaptive Structures and Technologies, Ottawa, Canada, 3-5, Oct., 2007.
48. N.S. Goo and Van Phuoc Phan, “Vibration Suppression of a Flexible Manipulator using LIPCA Actuator,” Proceeding of 18th International Conference on Adaptive Structures and Technologies, Ottawa, Canada, 3-5, Oct., 2007.
49. Thanh Tung Nguyen, My Pham, and Nam Seo Goo, “Development of a peristaltic micropump for bio-medical applications based on mini LIPCA,” Proceeding of International Symposium on Nature-Inspired Technology 2007, Daejeon, Korea, 11-12, Oct., 2007.
49. Thanh Tung Nguyen, My Pham, and Nam Seo Goo, “Development of a peristaltic micropump for bio-medical applications based on mini LIPCA,” Proceeding of International Symposium on Nature-Inspired Technology 2007, Daejeon, Korea, 11-12, Oct., 2007.
50. Guangzhe Li, Nam Seo Goo, and Cheol Heui Han, “Performance Evaluation of a Valveless Micropump using Electro-Fluid-Structural Interaction Simulation,”Proceeding of International Symposium on Nature-Inspired Technology 2007, Daejeon, Korea, 11-12, Oct., 2007.
50. Guangzhe Li, Nam Seo Goo, and Cheol Heui Han, “Performance Evaluation of a Valveless Micropump using Electro-Fluid-Structural Interaction Simulation,”Proceeding of International Symposium on Nature-Inspired Technology 2007, Daejeon, Korea, 11-12, Oct., 2007.
51. My Pham, Thanh Tung Nguyen, and Nam Seo Goo, “Development of a peristaltic micropump for bio-medical applications based on mini LIPCA,” Proceeding of International Conference on Intelligent Unmanned Systems, Bali, Indonessia, 24-25, Oct., 2007.
51. My Pham, Thanh Tung Nguyen, and Nam Seo Goo, “Development of a peristaltic micropump for bio-medical applications based on mini LIPCA,” Proceeding of International Conference on Intelligent Unmanned Systems, Bali, Indonessia, 24-25, Oct., 2007.
52. Van Phuoc Phan and Nam Seo Goo, “Vibration Suppression of a Flexible Manipulator using Self-tuning Optimal Control and LIPCA Actuator,” Proceeding of International Conference on Intelligent Unmanned Systems, Bali, Indonessia, 24-25, Oct., 2007.
52. Van Phuoc Phan and Nam Seo Goo, “Vibration Suppression of a Flexible Manipulator using Self-tuning Optimal Control and LIPCA Actuator,” Proceeding of International Conference on Intelligent Unmanned Systems, Bali, Indonessia, 24-25, Oct., 2007.
53. Quoc Viet Nguyen, Hoon Cheol Park, and Nam Seo Goo, “An Insect-Like Flapping-wing Device Actuated by a Compressed Unimorph Piezoelectric Composite,” Proceeding of The 4th Int. Conference on Ubiquitous Robots and Ambient Intelligence, Pohang, Korea, 22-23, Nov., 2007. (Best Paper Award)
53. Quoc Viet Nguyen, Hoon Cheol Park, and Nam Seo Goo, “An Insect-Like Flapping-wing Device Actuated by a Compressed Unimorph Piezoelectric Composite,” Proceeding of The 4th Int. Conference on Ubiquitous Robots and Ambient Intelligence, Pohang, Korea, 22-23, Nov., 2007. (Best Paper Award)
54. Quoc-Viet Nguyen, Hoon C. Park, Nam S. Goo, and Doyoung Byun, “A Flying Insect-Like Flapper actuated by a Compressed LIPCA,” Proceeding of IEEE International Conference on Robotics and Biomimetics, Sanya, China, 15-18, Dec., 2007.
54. Quoc-Viet Nguyen, Hoon C. Park, Nam S. Goo, and Doyoung Byun, “A Flying Insect-Like Flapper actuated by a Compressed LIPCA,” Proceeding of IEEE International Conference on Robotics and Biomimetics, Sanya, China, 15-18, Dec., 2007.
55. Van Phuoc Phan, Hoon Cheol Park, and Nam Seo Goo, “Vibration Suppression of a Flexible Manipulator Using Self-tuning Optimal Control and LIPCA Actuator,” Proceeding of SPIE's 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-13, March, 2008. (6928-98)
55. Van Phuoc Phan, Hoon Cheol Park, and Nam Seo Goo, “Vibration Suppression of a Flexible Manipulator Using Self-tuning Optimal Control and LIPCA Actuator,” Proceeding of SPIE's 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-13, March, 2008. (6928-98)
56. My Pham and Nam Seo Goo, “Development of a High-Performance Peristaltic Micropump,” Proceeding of SPIE's 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-13, March, 2008. (6931-20)
56. My Pham and Nam Seo Goo, “Development of a High-Performance Peristaltic Micropump,” Proceeding of SPIE's 15th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-13, March, 2008. (6931-20)
57. Seungbae Park, Abdullah Al-Yafawi, Da Yu, Jae B. Kwak, John Lee, and Nam Seo Goo, “Influence of Fastening Methods on the Dynamic Response and Reliability Assessment of PCBS in Cellular Phones under Free Drop,” Proceeding of 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Orlando, FL, USA, 28-31, May, 2008, pp. 876-882.
57. Seungbae Park, Abdullah Al-Yafawi, Da Yu, Jae B. Kwak, John Lee, and Nam Seo Goo, “Influence of Fastening Methods on the Dynamic Response and Reliability Assessment of PCBS in Cellular Phones under Free Drop,” Proceeding of 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Orlando, FL, USA, 28-31, May, 2008, pp. 876-882.
58. My Pham, Nam Seo Goo, and Man-Jong Lee, “Development of a High Performance Peristaltic Micropump,” Proceeding of International Conference on Multifunctional Materials and Structures, Hong Kong, China, 28-31, July, 2008, p. 77.
58. My Pham, Nam Seo Goo, and Man-Jong Lee, “Development of a High Performance Peristaltic Micropump,” Proceeding of International Conference on Multifunctional Materials and Structures, Hong Kong, China, 28-31, July, 2008, p. 77.
59. Tailie Kim, Nam Seo Goo, and Hoon Cheol Park, “Measurement of the Mechanical Property of a Beetle Wing Using Digital Image Correlation Technique,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
59. Tailie Kim, Nam Seo Goo, and Hoon Cheol Park, “Measurement of the Mechanical Property of a Beetle Wing Using Digital Image Correlation Technique,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
60. Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Performance Enhancement of an LIPCA Actuator Attached on a Flat Surface,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
60. Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Performance Enhancement of an LIPCA Actuator Attached on a Flat Surface,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
61. Sung-choong Woo and Nam Seo Goo, “Influence of Electromechanical Cyclic Loading on the Performance of a Bending Piezoelectric Composite Actuator,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
61. Sung-choong Woo and Nam Seo Goo, “Influence of Electromechanical Cyclic Loading on the Performance of a Bending Piezoelectric Composite Actuator,” Proceeding of International Conference on Advanced Materials, Development and Performance 2008, Beijing, China, 12-15, Oct., 2008, p. 108.
62. Van Phuoc Phan and Nam Seo Goo, “Performance of a Valveless Micropump Using Three-Dimensional Electro-Fluid-Structural Interaction Simulation,” Proceeding of ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, Maryland USA, 28-30, Oct., 2008 .(SMASIS2008-401)
62. Van Phuoc Phan and Nam Seo Goo, “Performance of a Valveless Micropump Using Three-Dimensional Electro-Fluid-Structural Interaction Simulation,” Proceeding of ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, Maryland USA, 28-30, Oct., 2008 .(SMASIS2008-401)
63. Sung-Choong Woo and Nam Seo Goo, “Fully Reversed Electric Fatigue Behavior of a Piezoelectric Composite Actuator,” Proceeding of ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, Maryland USA, 28-30, Oct., 2008, p. 108.(SMASIS2008-474)
63. Sung-Choong Woo and Nam Seo Goo, “Fully Reversed Electric Fatigue Behavior of a Piezoelectric Composite Actuator,” Proceeding of ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Ellicott City, Maryland USA, 28-30, Oct., 2008, p. 108.(SMASIS2008-474)
64. Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Lookup Table Control Method for Vibration Suppression of a Flexible Manipulator with Optimization of Minimum Settling Time and Energy Consumption,” Proceeding of KSAS-JSASS Joint International Conference on Aerospace Engineering, Jeju, Korea, 20-21, Nov., 2008, pp. 286-293.
64. Van Phuoc Phan, Nam Seo Goo, and Hoon Cheol Park, “Lookup Table Control Method for Vibration Suppression of a Flexible Manipulator with Optimization of Minimum Settling Time and Energy Consumption,” Proceeding of KSAS-JSASS Joint International Conference on Aerospace Engineering, Jeju, Korea, 20-21, Nov., 2008, pp. 286-293.
65. Eunjeong Ko, Jin Sun Ju, Eun Yi Kim, and Nam Seo Goo, “An Intelligent Wheelchair to Enable Mobility of Severely Disabled and Elder People,” Proceeding of International Conference on Consumer Electronics, Las Vegas, USA, 12-14, Jan., 2009.
65. Eunjeong Ko, Jin Sun Ju, Eun Yi Kim, and Nam Seo Goo, “An Intelligent Wheelchair to Enable Mobility of Severely Disabled and Elder People,” Proceeding of International Conference on Consumer Electronics, Las Vegas, USA, 12-14, Jan., 2009.
66. Tailie Jin, Nam Seo Goo, and Hoon Cheol Park, “Material Property Measurement of Bio-structures Using Digital Image Correlation Technique,” Proceeding of SPIE's 16th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-12, March, 2009. (7289-75, poster)
66. Tailie Jin, Nam Seo Goo, and Hoon Cheol Park, “Material Property Measurement of Bio-structures Using Digital Image Correlation Technique,” Proceeding of SPIE's 16th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 9-12, March, 2009. (7289-75, poster)
67. Ngoc San Ha and Nam Seo Goo, “Development of a Propulsion System for a Biomimetic Thruster," Proceeding of International Sysposium on Nature-Inspired Technology 2009, Jeju, Korea, 17-19, June, 2009. (poster)
67. Ngoc San Ha and Nam Seo Goo, “Development of a Propulsion System for a Biomimetic Thruster," Proceeding of International Sysposium on Nature-Inspired Technology 2009, Jeju, Korea, 17-19, June, 2009. (poster)
68. Cam Minh Tri Tien, and Nam Seo Goo, “Harvesting Energy Using a Lightweight Piezo-Composite Actuator," Proceeding of International Sysposium on Intelligent Unmanned System 2009, Jeju, Korea, 17-19, June, 2009. (poster)
68. Cam Minh Tri Tien, and Nam Seo Goo, “Harvesting Energy Using a Lightweight Piezo-Composite Actuator," Proceeding of International Sysposium on Intelligent Unmanned System 2009, Jeju, Korea, 17-19, June, 2009. (poster)
69. Ahn Tuan Tran Le and Nam Seo Goo, “Design, Fabrication and Experimental Results of a Peristaltic Micropump Using LIPCAs with Flexibly Supported Diaphragms," Proceeding of International Sysposium on Intelligent Unmanned System 2009, Jeju, Korea, 17-19, June, 2009. (poster)
69. Ahn Tuan Tran Le and Nam Seo Goo, “Design, Fabrication and Experimental Results of a Peristaltic Micropump Using LIPCAs with Flexibly Supported Diaphragms," Proceeding of International Sysposium on Intelligent Unmanned System 2009, Jeju, Korea, 17-19, June, 2009. (poster)
70. Tailie Jin, Nam Seo Goo, Sung-Choong Woo, and Hoon Cheol Park, “Use of a Digital Image Correlation Technique for Measuring Material Property of a Beetle Wing," Proceeding of International Sysposium on Nature-Inspired Technology 2009, Jeju, Korea, 17-19, June, 2009.
70. Tailie Jin, Nam Seo Goo, Sung-Choong Woo, and Hoon Cheol Park, “Use of a Digital Image Correlation Technique for Measuring Material Property of a Beetle Wing," Proceeding of International Sysposium on Nature-Inspired Technology 2009, Jeju, Korea, 17-19, June, 2009.
71. Nam Seo Goo and Tailie Jin, “Material Property Measurement of a Beetle Wing using Digital Image Correction Technique," ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, USA, 21-23, September, 2009. (SMASIS2009-1444)
71. Nam Seo Goo and Tailie Jin, “Material Property Measurement of a Beetle Wing using Digital Image Correction Technique," ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, USA, 21-23, September, 2009. (SMASIS2009-1444)
72. Nam Seo Goo, “Fabrication and Experimental Characterization of a Peristaltic Micropumps Using LIPCAs," ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, USA, 21-23, September, 2009. (SMASIS2009-1277)
72. Nam Seo Goo, “Fabrication and Experimental Characterization of a Peristaltic Micropumps Using LIPCAs," ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, USA, 21-23, September, 2009. (SMASIS2009-1277)
73. Ngoc-San Ha and Nam Seo Goo, “Development of a Biomimetic Swimmer and the Flow Pattern Surrounding the Filament," Proceeding of SPIE's 17th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 7-11, March, 2010. (7643-64)
73. Ngoc-San Ha and Nam Seo Goo, “Development of a Biomimetic Swimmer and the Flow Pattern Surrounding the Filament," Proceeding of SPIE's 17th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 7-11, March, 2010. (7643-64)
74. Cam Minh Tri Tien and Nam Seo Goo, “Harvesting Energy Using a Piezo-Composite Generating Element (PCGE)," Proceeding of SPIE's 17th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 7-11, March, 2010. (7643-119, poster)
74. Cam Minh Tri Tien and Nam Seo Goo, “Harvesting Energy Using a Piezo-Composite Generating Element (PCGE)," Proceeding of SPIE's 17th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 7-11, March, 2010. (7643-119, poster)
75. Abdullah Al-Yafawi, Saket Patil, Da Yu, Seungbae Park and James Pitarresi, Nam Seo Goo, “Random Vibration Test for Electric Assemblies Fatigue Life Estimation," Proceeding of ITherm 2010 (Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, NV, USA, 31 May-6 June, 2010. (7643-119, poster)
75. Abdullah Al-Yafawi, Saket Patil, Da Yu, Seungbae Park and James Pitarresi, Nam Seo Goo, “Random Vibration Test for Electric Assemblies Fatigue Life Estimation," Proceeding of ITherm 2010 (Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, NV, USA, 31 May-6 June, 2010. (7643-119, poster)
76. Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezo-Composite Generating Element in Harvesting Wind Energy in Urban Region," Proceeding of International Sysposium on Nature-Inspired Technology 2010, Seoul, Korea, 14-15, Oct., 2010.
76. Cam Minh Tri Tien and Nam Seo Goo, “Use of a Piezo-Composite Generating Element in Harvesting Wind Energy in Urban Region," Proceeding of International Sysposium on Nature-Inspired Technology 2010, Seoul, Korea, 14-15, Oct., 2010.
77. Tailie Jin, Ngoc-San Ha, Nam Seo Goo, and Hoon Cheol Park, “Nonhomogeneity and Anisotropy of Membrane and Finite Element Modeling of a Beetle Wing," Proceeding of SPIE's 18th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2011. (7975-15)
77. Tailie Jin, Ngoc-San Ha, Nam Seo Goo, and Hoon Cheol Park, “Nonhomogeneity and Anisotropy of Membrane and Finite Element Modeling of a Beetle Wing," Proceeding of SPIE's 18th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2011. (7975-15)
78. Hung Truyen Luong and Nam Seo Goo, “Design of a Magnetic Force Exciter for a Small-Scale Windmill using a Piezo-Composite Generating Element," Proceeding of SPIE's 18th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2011. (7977-15)
78. Hung Truyen Luong and Nam Seo Goo, “Design of a Magnetic Force Exciter for a Small-Scale Windmill using a Piezo-Composite Generating Element," Proceeding of SPIE's 18th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, 6-10, March, 2011. (7977-15)
79. Kwang Joon Yoon and Nam Seo Goo, “Development of a Small Autonomous Flying Robot with Four-Rotor System," Proceeding of SPIE's 15th International Conference on Advanced Robotics, Tallinn, Estonia, 20-23 June, 2011, pp. 150-154.
79. Kwang Joon Yoon and Nam Seo Goo, “Development of a Small Autonomous Flying Robot with Four-Rotor System," Proceeding of SPIE's 15th International Conference on Advanced Robotics, Tallinn, Estonia, 20-23 June, 2011, pp. 150-154.
80. Nam Seo Goo, Ngoc San Ha, Tailie Jin, and Hoon Cheol Park, “Material Properties of Beetle Hindwing for Design of Artificial Wing," Proceeding of SPIE's 15th International Conference on Advanced Robotics, Tallinn, Estonia, 20-23 June, 2011. (presentation only)
80. Nam Seo Goo, Ngoc San Ha, Tailie Jin, and Hoon Cheol Park, “Material Properties of Beetle Hindwing for Design of Artificial Wing," Proceeding of SPIE's 15th International Conference on Advanced Robotics, Tallinn, Estonia, 20-23 June, 2011. (presentation only)
81. Hung Truyen Luong, Cam Minh Tri Tien, and Nam Seo Goo, “Characteristics of a Piezocomposite Generating Element," Proceeding of 18th International Conference on Composite Materials, Jeju, Korea, 21-26 Aug., 2011. (M21-5-AK0378)
81. Hung Truyen Luong, Cam Minh Tri Tien, and Nam Seo Goo, “Characteristics of a Piezocomposite Generating Element," Proceeding of 18th International Conference on Composite Materials, Jeju, Korea, 21-26 Aug., 2011. (M21-5-AK0378)
82. Nam Seo Goo and Tailie Jin, “Measurement of Thermal Deformation of a Dual Ring Structure Using Digital Image Correlation Method," Proceeding of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, USA, 11-17, Nov., 2011. (IMECHE2011-63423)
82. Nam Seo Goo and Tailie Jin, “Measurement of Thermal Deformation of a Dual Ring Structure Using Digital Image Correlation Method," Proceeding of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, USA, 11-17, Nov., 2011. (IMECHE2011-63423)
83. Ngoc San Ha, Nam Seo Goo, Tailie Jin, Quoc Viet Nguyen, and Hoon Cheol Park, “Dynamic Characteristic of an Artificial Wing Mimicking a Beetle Hind Wing," Proceeding of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, USA, 11-17, Nov., 2011. (IMECHE2011-64835)
83. Ngoc San Ha, Nam Seo Goo, Tailie Jin, Quoc Viet Nguyen, and Hoon Cheol Park, “Dynamic Characteristic of an Artificial Wing Mimicking a Beetle Hind Wing," Proceeding of the ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, USA, 11-17, Nov., 2011. (IMECHE2011-64835)
84. Hung Truyen Luong and Nam Seo Goo, “Performance of a Piezo-Composite Generating Element," Proceeding of 2011 8th Conference on Ubiquitous Robotics and Ambient Intelligence, Songdo ConventiA, Korea, 23-26, Nov., 2011, pp. 203-204. (Invited talk)
84. Hung Truyen Luong and Nam Seo Goo, “Performance of a Piezo-Composite Generating Element," Proceeding of 2011 8th Conference on Ubiquitous Robotics and Ambient Intelligence, Songdo ConventiA, Korea, 23-26, Nov., 2011, pp. 203-204. (Invited talk)
85. Ngoc San Ha, Nam Seo Goo, and Hoon Cheol Park, “Dynamic Characteristics of a Beetle Hind Wing," Proceeding of SPIE's 2012 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 11-15, March, 2012. (8339-20)
85. Ngoc San Ha, Nam Seo Goo, and Hoon Cheol Park, “Dynamic Characteristics of a Beetle Hind Wing," Proceeding of SPIE's 2012 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 11-15, March, 2012. (8339-20)
86. Jun Zhao, Zhefeng Xuan, and Nam Seo Goo, “Development of d33-mode Piezocomposite generating Element," Proceeding of SPIE's 2012 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 11-15, March, 2012. (8341-65)
86. Jun Zhao, Zhefeng Xuan, and Nam Seo Goo, “Development of d33-mode Piezocomposite generating Element," Proceeding of SPIE's 2012 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 11-15, March, 2012. (8341-65)
87. Tailie Jin, Nam Seo Goo, Won-Seop Kim, and Jinho Lee, “Thermal Strain Measurement of a Double Ring Structure Using Digital Image Correlation Method," Proceeding of ITherm 2012 (IEEE Intersociety Conference on Thermal Phenomena in Electric Systems), San Diego, CA, USA, May 30-June 1, March, 2012.
87. Tailie Jin, Nam Seo Goo, Won-Seop Kim, and Jinho Lee, “Thermal Strain Measurement of a Double Ring Structure Using Digital Image Correlation Method," Proceeding of ITherm 2012 (IEEE Intersociety Conference on Thermal Phenomena in Electric Systems), San Diego, CA, USA, May 30-June 1, March, 2012.
88. Zhefeng Xuan and Nam Seo Goo, “Analysis of a Gas Cooling System for an infrared Sensor Window," Proceeding of ITherm 2012 (IEEE Intersociety Conference on Thermal Phenomena in Electric Systems), San Diego, CA, USA, May 30-June 1, March, 2012.
88. Zhefeng Xuan and Nam Seo Goo, “Analysis of a Gas Cooling System for an infrared Sensor Window," Proceeding of ITherm 2012 (IEEE Intersociety Conference on Thermal Phenomena in Electric Systems), San Diego, CA, USA, May 30-June 1, March, 2012.
89. Hung Truyen Luong and Nam Seo Goo, “Performance of Multiple Energy Harvesting Elements in a Small-Scale Windmill," Proceedings of International Sysposium on Intelligent Unmanned System 2012, Singapore, 22-24, Oct. 2012.
89. Hung Truyen Luong and Nam Seo Goo, “Performance of Multiple Energy Harvesting Elements in a Small-Scale Windmill," Proceedings of International Sysposium on Intelligent Unmanned System 2012, Singapore, 22-24, Oct. 2012.
90. Nam Seo Goo, Ngoc San Ha, and Hoon Cheol Park, “Relationship Between Wingbeat Frequency and Resonant Frequency fo the wing in insects," Proceeding of SPIE's 2013 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 10-14, March, 2013. (8686-24)
90. Nam Seo Goo, Ngoc San Ha, and Hoon Cheol Park, “Relationship Between Wingbeat Frequency and Resonant Frequency fo the wing in insects," Proceeding of SPIE's 2013 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 10-14, March, 2013. (8686-24)
91. Nam Seo Goo, Van-Lai Pham, Jun Zhao, and Jisoo Park, “Durability of a d33-mode Piezocomposite Electricity-Generating Element," Proceeding of SPIE's 2013 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 10-14, March, 2013. (8686-51)
91. Nam Seo Goo, Van-Lai Pham, Jun Zhao, and Jisoo Park, “Durability of a d33-mode Piezocomposite Electricity-Generating Element," Proceeding of SPIE's 2013 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 10-14, March, 2013. (8686-51)
92. Nam Seo Goo, Ngoc San Ha, and Tailie Jin, “Shock Impact Reliability Measurement of a Handheld Product by High Speed Cameras," Proceeding of International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2013), San Francisco, CA, USA, 16-18, July, 2013.
92. Nam Seo Goo, Ngoc San Ha, and Tailie Jin, “Shock Impact Reliability Measurement of a Handheld Product by High Speed Cameras," Proceeding of International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2013), San Francisco, CA, USA, 16-18, July, 2013.
93. Hoang My Vang, Ngoc-San Ha, and Nam Seo Goo, “Measurement of dynamic characteristics of an artificial wing mimicking an Allomyrina Dichotoma beetle's hind wing using digital image correlation technique," SPIE's 2014 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 9-13, March, 2014. (9055-34)
93. Hoang My Vang, Ngoc-San Ha, and Nam Seo Goo, “Measurement of dynamic characteristics of an artificial wing mimicking an Allomyrina Dichotoma beetle's hind wing using digital image correlation technique," SPIE's 2014 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 9-13, March, 2014. (9055-34)
94. Vinh Tung Le, Van-Lai Pham, and Nam Seo Goo, “Durability of a piezo-composite electricity generating element in a d33 mode energy harvesting to impact loading," SPIE's 2014 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 9-13, March, 2014. (9057-5)
94. Vinh Tung Le, Van-Lai Pham, and Nam Seo Goo, “Durability of a piezo-composite electricity generating element in a d33 mode energy harvesting to impact loading," SPIE's 2014 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 9-13, March, 2014. (9057-5)
95. Xiao Long jin, Ngoc-San Ha, and Nam Seo Goo, “Design of a bidirectional piezoelectric hybrid actuator," SPIE's 2015 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 8-12, March, 2015. (9431-62)
95. Xiao Long jin, Ngoc-San Ha, and Nam Seo Goo, “Design of a bidirectional piezoelectric hybrid actuator," SPIE's 2015 Annual International Symposium on Smart Structures/NDE, San Diego, CA, USA, 8-12, March, 2015. (9431-62)
Domestic Journal
Domestic Journal
국내 학술지
1. 김 진희, 구 남서, 김 승조, “벌칙함수 유한요소법을 이용한 핀하중을 받는 복합재료판의 파단해석,” 한국복합재료학회지, 제 6권 1호, pp. 83-90, 1993.
2. 구 남서, 김 태원, 김 승조, “천음속 영역에서의 윙렛이 있는 복합재료 항공기 날개의 최적구조 설계,” 한국항공우주학회지, 제 22권 4호, pp. 70-77, 1994.
3. 김 태원, 구 남서, 유 정열, 김 승조, “복합재료로 된 원통형 패널의 충격응답 및 손상 해석,” 한국복합재료학회지, 제 8권 1호, pp. 34-42, 1995.
4. 구남서, 최승우, 김승조, “동적 접촉 알고리듬을 사용한 복합재 적층 패널의 충격거동과 손상에 관한 패라미타 연구,” 한국항공우주학회지, 제 27권 3호, pp. 63-77, 1999.
5. 윤광준, 구남서, 박훈철, “지능구조물용 압전재료 작동기의 연구 및 개발 동향,” 한국항공우주학회지, 제 29권 1호, pp. 134-141, 2001.
6. 구남서, 권영두, 김주식, 윤광준, “온도변화 시 변형률 계측 기법 및 복합재료의 열팽창 계수 측정에의 적용,” 한국항공우주학회지, 제 29권 2호, pp. 43-51, 2001.3
7. 구남서, 신석준, 박훈철, 윤광준, “곡면형 비대칭 압전복합재료 작동기 LIPCA의 설계해석/제작/성능평가,” 대한기계학회논문집 A권, 제 25권 10호, pp. 1514-1519, 2001.10
8. 구남서, “경량 압전복합재료 곡면형 작동기( LIPCA)의 작동성능 평가를 위한 유한요소 해석,” 대한기계학회논문집 A권, 제 25권 11호, pp. 1881-1886, 2001.11
9. 권영두, 권순범, 구남서, 진승보 “연속 최적화 문제에 대한 수렴성이 개선된 순차적 주밍 유전자 알고리듬, ” 대한기계학회논문집 A권, 제 26권 2호, pp. 406-414, 2002.2
10. 조병찬, 이상시, 박훈철, 윤광준, 구남서, “3차원 가정변형률 솔리드 요소를 이용한 압전 작동기/감지기 해석,” 한국항공우주학회지, 제 30권 2호, pp. 67-74, 2002.3
11. 권영두, 구남서, 김성윤, 조민호, “볼트결합부를 포함한 구조물의 정적 및 동적 해석을 위한 유한요소 모델링,” 대한기계학회지, 제 26권 4호, pp. 667-676, 2002.4
12. 최원규, 이종봉, 권영두, 구남서, “중심 편석층이 있는 극후판 박스-칼럼의 대입열 코너이음 용접시 그루브 형상의 영향,” 한국해양공학회지, 제 16권 2호, pp. 72-79, 2002.4
13. 권영두, 김석삼, 구남서, 박정규, “접촉하중을 받는 코팅층이 있는 부재의 응력해석을 위한 부분 모델 방법의 개발,” 한국윤활학회지, 제 18권 3호, pp. 194-203, 2002.6
14. 박정, 박훈철, 윤광준, 구남서, 이재화, “가정변형률 솔리드 요소를 이용한 복합재 샌드위치 평판의 저속충격 해석,” 한국항공우주학회지, 제 30권 7호, pp. 44-50, 2002.10
15. 구남서, 문영규, 우경식, “CF3327 평직 복합재료의 열전도도,” 한국복합재료학회지, 제 15권 5호, pp. 27-34, 2002.10
16. 우경식, 김필중, 구남서, 윤광준, “탄소/페놀 8-매 주자직 복합재료의 3차원 열기계적 등가 물성치에 관한 연구,” 한국항공우주학회지, 제 31권 7호, pp. 41-52, 2003.9
17. 우경식, 구남서, “탄소/페놀릭 8-매 주자직 복합재료의 열전도도,” 한국항공우주학회지, 제 31권 9호, pp. 18-25, 2003.11
18. 임상민, 이상기, 박훈철, 윤광준, 구남서, “압전 작동기 LIPCA를 이용한 형상가변익 설계 및 작동구현,” 한국항공우주학회지, 제 31권 10호, pp. 34-39, 2003.12
19. 박경훈, 구남서, 박훈철, 윤광준, 변영환, “소형 터보 제트 엔진을 이용한 축소형 팁제트 로터의 설계 및 시험,” 한국항공우주학회지, 제 32권 2호, pp. 31-37, 2004.3
20. 이제동, 박훈철, 구남서, 윤영수, 윤광준, “빗살형 전극을 이용한 적층 세라믹 박판 작동층 IDEAL의 설계/제조/성능시험,” 한국세라믹학회지, 제 41권 3호, pp. 216-220, 2004.3
21. 구남서, 박훈철, 윤광준, 이열화, “테이프래핑 구조물의 구조 해석 및 파단예측,” 한국항공우주학회지, 제 32권 3호, pp. 17-21, 2004.4
22. 이상기, 김영성, 박훈철, 윤광준, 구남서, 조창민, “압전 세라믹의 재료 비선형성을 고려한 LIPCA 작동기의 성능 해석,” 한국항공우주학회지, 제 32권 3호, pp. 37-45, 2004.4
23. 백일현, 구남서, 윤광준, 조재환, “전도성 형상 기억 폴리머 작동기의 개발,” 제어자동화시스템공학 논문지, 제 10권 11호, pp. 976-980, 2004.11.
24. 구남서, 윤광준, 신영석, 이열화, 정해용, 김병화, “유도무기 케이블 페어링의 강도 해석 및 접착재 강도 시험,” 한국항공우주학회지, 제 33권 6호, pp. 76-82, 2005.6.
25. 아리프수하리요노, 구남서, 박훈철, 윤광준, “압전 복합재료 작동기 LIPCA를 이용한 보의 진동 제어,” 한국군사과학기술학회지, 제 8권 4호, pp. 130-135, 2005.12
26. 이승식, 모 시아푸딘, 박훈철, 윤광준, 구남서, “LIPCA 작동기로 구동되는 날갯짓 기구의 설계 및 성능평가,” 한국항공우주학회지, 제 33권 12호, pp. 48-53, 2005.12
27. 백일현, 구남서, 정용채, 조재환, “전도성 형상기억폴리우레탄 작동기의 개발 및 응용,” 한국항공우주학회지, 제 34권 1호, pp. 56-64, 2006.1.
28. 아리프 수하리요노, 구남서, 이영재, 박훈철, 윤광준, “압전 복합재료 작동기 LIPCA와 단일 PZT의 보 진동 제어 성능 비교,” 한국항공우주학회지, 제 34권 3호, pp. 60-66, 2006.3.
29. 우성충, 구남서, “잔류 열 변형을 고려한 평판형 압전 복합재료 유니모프 작동기의 해석,” 대한기계학회논문집 A권, 제 30권 4호, pp. 409-419, 2006.4.
30. 우성충, 구남서, “평판형 압전 복합재료 작동기의 작동 변위에 미치는 인가전압 및 구동 주파수의 영향,” 대한기계학회논문집 A권, 제 30권 5호, pp. 576-584, 2006.5.
31. 구옌탄텅, 구남서, “원형 경량 압전 복합재료 작동기를 이용한 마이크로 펌프의 개발,” 한국항공우주학회지, 제 34권 6호, pp. 35-41, 2006.6.
32. 박훈철, 모하메드 샤이푸딘, 변도영, 구남서, “곤충 비행원리를 모사한 압전 작동기 구동형 날갯짓 기구의 평가,” 한국항공우주학회지, 제 34권 8호, pp. 55-62, 2006.8.
33. 우성충, 구남서, “음향방출법을 이용한 평판형 압전 복합재료 작동기의 파괴거동 해석,” 비파괴검사학회지, 제 26권 4호, pp. 220-230, 2006.8.
34. 박훈철, 테디 위구나, 모 샤이푸딘, 구남서, “인공근육형 LIPCA를 이용한 물고기 모방 로봇의 설계, 제작 및 실험,” 대한기계학회논문집 A권, 제 31권 1호, pp. 36-42, 2007.1.
35. 란동 마투아, 구남서, 박훈철 “경량 압전 복합재료 작동기를 이용한 끝단 질량이 부착된 보의 진동 제어,” 한국항공우주학회지, 제 35권 3호, pp. 218-224, 2007.3.
36. 구옌탄텅, 구남서, 구옌빈칸, 유영태, “이온성 폴리머-금속 복합재료 작동층을 사용한 플랩 밸브 마이크로 펌프의 설계, 개발 및 특성 규명,” 한국항공우주학회지, 제 35권 4호, pp. 302-307, 2007.4.
37. 우성충, 구남서, “파형 및 주파수해석에 근거한 굽힘 압전 복합재료 작동기 손상모드의 비파괴적 평가,” 대한기계학회논문집 A권, 제 31권 8호 pp. 870-879, 2007.8.
38. 우성충, 구남서, “굽힘 압전 복합재료 작동기의 하중 특성,” 대한기계학회논문집 A권, 제 31권 8호, pp. 880-888, 2007.8.
39. 우성충, 구남서, “Health Monitoring of a Composite Actuator with a PZT Ceramic during Electomechanical Fatigue Loading,” Journal of the Korean Society for Nondestructive Testing, Vol. 27, No. 6, pp. 541-549, 2007.12.
40. 리광철, 구남서, 한철희, “시뮬레이션을 통한 무밸브 마이크로 펌프의 전기-유체-구조 상호작용에 대한 연구,” 한국항공우주학회지, 제 36권 1호, pp. 7-13, 2008.1.
41. 우성충, 구남서, “전기적 피로하중을 받는 압전 작동기의 손상 메커니즘,” 대한기계학회논문집 A권, 제 32권 10호, pp. 856-865, 2008.10.
42. 박훈철, 구옌쿠옥비옛, 변도영, 구남서, 윤광준, “압축하중을 받는 압전 작동기로 구동하는 곤충모방 날갯짓 기구의 특성,” 한국항공우주학회지, 제 36권 11호, pp. 1063-1071, 2008.11.
43. 팜마이, 판반푸억, 한철희, 구남서, “무밸브 마이크로 펌프의 성능평가를 위한 3차원 전기-유체-구조 상호작용 해석,” 한국항공우주학회지, 제 37권 8호, pp. 744-750, 2009.8.
44. 띠앵민드리, 김종화, 구남서, “압전-복합재료 발전 소자의 설계 및 특성,” 대한기계학회논문집 A권, 제 34권 7호, pp. 867-872, 2010.7.
45. 김태렬, 구남서, “디지털 영상 보정 기법을 이용한 이중 링 구조물의 열변형 측정,” 한국항공우주학회지, 제 39권 9호, pp. 877-882, 2011.9.
46. 현철봉, 구남서, 김재영, 이호성, “적외선 윈도우용 가스식 냉각장치 해석 기법,” 한국군사과학기술학회지, 제 15권 2호, pp. 130-137, 2012.4.
47. 현철봉, 김태렬 구남서, 배병운, 김태흔, 고한서, 윤기원, “집적형 하이브리드 구동장치의 성능시험,” 한국항공우주학회지, 제 41권 1호, pp. 25-30, 2013.1.
48. 김소룡, 하넉산, 구남서, 배병운, 김태흔, 고한서, 이창섭, “양방향 압전-유압 하이브리드 구동장치의 성능 시험,” 한국군사과학기술학회지, 제 18권 3호, pp. 213-219, 2015.3.
49. 구남서, 방호앙미, 레빈퉁, 김태렬, “고속 디지털 카메라를 이용한 알루미늄 하니콤 샌드위치 보의 고유 진동수 계측,” 한국항공우주학회지, 제 45권 1호, pp. 213-219, 2017.1.
50. 구남서, 레반르엉, 안용산, 유웅렬, 황진옥, 박종규, “우주 안테나 설계용 형상기억 폴리머 시편의 전개 시험,” 한국항공우주학회지, 제 45권 12호, pp. 30-35, 2017.12.
51. 구남서,안재균, 김태균, 박미선, 박종규, “가열 요소를 이용한 형상기억폴리머 안테나 축소 모형의 전개 실험,” 대한기계학회지 A권, 제 42권 10호, pp. 945-950, 2018.10.
52. 안용산, 김진수, 구남서,박미선, 김연태, 박종규, 유웅렬, “형상기억고분자 복합재료 안테나의 제조 및 전개 거동 분석,” Composites Research, 제 31권 6호, pp. 347-354, 2018.12.
53. 신서해, 도안유엔뷰, 구남서, “전역-국부 다중 DIC 시스템을 이용한 노치 구조물의 열변형 계측,” 한국항공우주학회지, 제 49권 8호, pp. 617-626, 2021.8.
ISSN #. 항공우주: 1225-1348, 대한기계: 1226-4873, 비파괴: 1225-7841, 군사과학: 1598-9127, Composites Research: 2288-2103
Domestic Conference
Domestic Conference
국내 학술대회
1. 구남서, 김승조, “Fuzzy Optimal Design of Composite Plates Using Finite Element Method,” 한국항공우주학회 추계학술대회 초록집, pp. 169-176, 1991.
2. 구남서, 김태원, 김승조, “윙렛이 있는 복합재료로 된 천음속 항공기 날개의 최적구조 설계,” 한국항공우주학회 추계학술대회 초록집, pp. 167-170, 1992.
3. 구남서, 김태원, 김승조, “MSC/NASTRAN을 이용한 복합재료 항공기 날개의 최적구조설계,” 제 3회 MSC/NASTRAN 사용자 논문 발표집, pp. 211-225, 1992.
4. 김태원, 김진희, 구남서, 김승조, “벌칙함수 유한요소법을 이용한 핀하중을 받는 복합재료판의 파단해석,” 한국복합재료학회 추계학술대회 초록집, p. 111, 1992.
5. 구남서, 김태원, 김승조, “복합재료로 된 원통형 패널의 충격응답 및 손상해석,” 한국복합재료학회 춘계학술대회 초록집, pp. 193-199, 1994.
6. 구남서, 김승조, “벌칙함수 유한요소법을 이용한 복합재료 구조물의 정적, 동적 해석,” 한국항공우주학회 추계학술대회 초록집, pp. 404-407, 1994.
7. 구남서, 김형주, 김승조, “요소별 강성저하법을 이용한 복합재료 판의 저속충격 해석,” 한국복합재료학회 춘계학술대회 초록집, pp. 142-147, 1995.
8. 구남서, 김승조, “저속충격시 복합재료 적층판의 정적 및 동적 접촉 해석,” 한국항공우주학회 추계학술대회 초록집, pp. 502-505, 1995.
9. 김승조, 최승우, 구남서, “Parametric Study on Impact Behaviors of Cylindrical Composite Plates,” 한국복합재료학회 춘계학술대회 초록집, pp. 502-505, 1997.
10. 윤광준, 이형주, 김주식, 구남서, “스트레인 게이지를 이용한 열변형률 측정 및 열응력 해석 기법," 제 9차 유도무기 학술대회 초록집, pp. 601-606, 1999.
11. 김종환, 구남서, “알루미늄 및 복합재료의 고온 강도시험,” 제 9차 유도무기 학술대회 초록집, pp. 594-600, 1999.
12. 구남서, 윤광준, “온도변화 시 스트레인 게이지를 이용한 변형률 및 응력 측정 기법,” 대한기계학회 경북지부 2000년도 춘계학술대회 논문집, pp. 26-30, 2000. (대한기계학회 논문 번호 2000R305)
13. 윤광준, 구남서, 박훈철, 정재한, “곡면형 비대칭 압전복합재료 작동기 LIPCA의 설계해석/제작/성능평가," 대한기계학회 2000년도 제 2회 재료 및 파괴부문 학술대회 논문집 논문집, pp. 17-23, 2000. (대한기계학회 논문 번호 KSME 00MF048)
14. 권영두, 구남서, 신상목, 조민호, “적합/비적합 유한요소를 사용한 Long Cylinder 문제의 해석,” 대한기계학회 경북지부 추계학술대회 논문집, pp. 26-38, 2000. (대한기계학회 논문 번호 2000R317)
15. 권영두, 권순범, 구남서, 진승보, “회전식 수문의 중량 최소화에 대한 지지점 위치의 최적설계,” 대한기계학회 추계학술대회논문집 A, pp. 492-497, 2000. (대한기계학회 논문 번호 KSME 00F067)
16. 박훈철, 이상기, 조병찬, 윤광준, 구남서, “삼차원 가정 변형률 요소를 이용한 압전형 작동기의 작동특성 해석, 한국항공우주학회 추계학술대회 논문집, 2000.
17. 구남서, 박훈철, 윤광준, “경량 압전 작동기 (LIPCA)의 작동성능 평가를 위한 유한요소 해석,” 한국복합재료학회 추계학술대회 논문집, pp. 135-140, 2000.
18. 정재한, 구남서, 박훈철, 윤광준, “다종 재료층으로 구성된 적층판의 열변형 거동 연구,” 한국복합재료학회 추계학술대회 논문집, pp. 54-57, 2000.
19. 조민호, 권영두, 구남서, 김성윤, “볼트 결합부를 포함한 구조물의 유한요소 모델링 및 동적해석,” 한국군사과학기술학회 종합학술대회 논문집, pp. 465-468, 2001.
20. 진승보, 권영두, 권순범, 구남서, “순차적 주밍 유전자 알고리듬을 이용한 Wicket Gate 작동용 서보모터의 용량 최소화 설계,” 제 11차 유도무기 학술대회 논문집, pp. 531-534, 2001.
21. 문영규, 구남서, 김철, 우경식, 윤광준, “직물 복합재료의 열전도도 예측 및 실험적 계측,” 제 11차 유도무기 학술대회 논문집, pp. 539-542, 2001.
22. 김현진, 구남서, 권영두, 하창욱, 정한경, “OECD 인증을 위한 농업용 트랙터 캐빈의 구조 해석,” 대한기계학회 추계학술대회논문집 A, pp. 431-436, 2001. (대한기계학회 논문 번호 KSME 01F071)
23. 구남서, 우경식, 정대근, “적층 위상차를 고려한 평직 복합재료의 미시역학적 계산, ” 한국군사과학기술학회 종합학술대회 논문집, pp. 187-189, 2002.
24. 김균열, 박기훈, 구남서, 박훈철, 윤광준 “경량 압전복합재료 작동기 LIPCA의 피로특성 규명,” 한국항공우주학회 춘계학술대회 논문집, pp. 199-202, 2003.
25. 박경훈, 구남서, 박훈철, 윤광준 “축소형 팁제트 로터의 설계 및 구조해석,” 한국항공우주학회 춘계학술대회 논문집, pp. 203-206, 2003.
26. 구남서, 우경식 “탄소/페놀릭 8매 주자직 복합재료의 열전도도 계측,” 한국복합재료학회 춘계학술대회 논문집, pp. 50-52, 2003.
27. 박경훈, 구남서, 박훈철, 윤광준, 변영환, “소형 터보 제트 엔진을 이용한 팁제트 로터의 개발,” 한국군사과학기술학회 종합학술대회 논문집, pp. 950-953, 2003.
28. 임상민, 이상기, 배기준, 박훈철, 윤광준, 구남서, 변영환, “뒷전 플랩이 압전작동기 LIPCA로 작동되는 날개의 설계 및 성능평가,” 한국항공우주학회 추계학술대회 논문집, pp. 737-740, 2003.
29. 이상기, 박훈철, 윤광준, 구남서, 조창민, “압전 쉘 요소를 이용한 압전 복합재 작동기의 재료 비선형 해석,” 한국항공우주학회 추계학술대회 논문집, pp. 741-744, 2003.
30. 이제동, 윤광준, 박훈철, 구남서, “압전상수 d33를 이용한 고성능 압전 복합재료 유니모프 작동기 개발 기초연구,” 한국항공우주학회 추계학술대회 논문집, pp. 745-748, 2003.
31. 구남서, 박훈철, 윤광준, 이열화, “테이프래핑 구조물의 해석기법,” 제 12차 유도무기 학술대회 논문집, pp. 399-402, 2003.
32. 백일현, 구남서, 윤광준, 조재환, 정용채, “능동작동기로써의 전도성 형상기억폴리머에 관한 기초연구,” 한국항공우주학회 춘계학술발표회 논문집, 용평리조트, pp. 438-442, 2004.4.16-17
33. 김규범, 백일현, 윤광준, 박훈철, 구남서, “회전익 초소형 비행체의 제작 및 실험,” 한국항공우주학회 춘계학술발표회 논문집, 용평리조트, pp. 609-612, 2004.4.16-17
34. 구남서, 윤광준, 신영석, 이열화, 정해용, 김병화, “유도무기 케이블 페어링의 강도 해석 및 실험,” 한국군사과학기술학회 종합학술대회 논문집, 대전, pp. 889-892, 2004.8.26
35. 헤리 세티아완, 구남서, 윤광준, “반복하중을 받는 압전 복합재료 작동기의 피로 특성,” 한국복합재료학회 추계학술대회 논문집, 부산, pp. 286-289, 2004.10.15
36. 이승엽, 모하메드 샤이푸딘, 이상기, 박훈철, 구남서, 윤광준, “압전 작동기 LIPCA를 이용한 플랩핑 장치의 설계 및 구현,” 한국항공우주학회 추계학술대회 논문집, 서울, pp. 516-520, 2004.11.18-19
37. 유디 허와안, 박훈철, 구남서, 윤광준, 변영환, “소형 형상가변익형 날개의 설계와 구현,” 한국항공우주학회 추계학술대회 논문집, 서울, pp. 520-523, 2004.11.18-19
38. 조준성, 구남서, 박훈철, 윤광준, “원형 안테나 구조를 갖는 스마트 스킨의 구조 설계, 해석 및 실험,” 한국복합재료학회 춘계학술대회 논문집, 서울, pp. 46-50, 2005.4.29
39. 백일현, 구남서, 정용채, 조재환, “전도성 형상 기억 폴리우레탄 작동기의 개발 및 응용,” 한국복합재료학회 춘계학술대회 논문집, 서울, pp. 226-230 , 2005.4.29
40. 아리프 수하리요노, 구남서, 박훈철, 윤광준, “압전 작동기 LIPCA를 이용한 보의 진동 제어,” 한국군사과학기술학회 종합학술대회 논문집, 서울, pp. 663-666, 2005.8.30
41. 아리프 수하리요노, 구남서, 박훈철, 윤광준, “보 진동 제어 시 LIPCA와 순수 PZT의 성능 비교,” 한국항공우주학회 추계학술대회 논문집, 강원도 평창, pp. 525-528 , 2005.11.10-11.
42. 박훈철, 모 샤이푸딘, 윤광준, 구남서, “압전작동기 구동하는 곤충 날갯짓 모방 기구,” 한국항공우주학회 추계학술대회 논문집, 강원도 평창, pp. 557-560 , 2005.11.10-11.
43. 박훈철, 모 샤이푸딘, 윤광준, 구남서, “압전작동기 LIPCA로 구동하는 곤충 날갯짓 기구,” 2005 추계 소음진동 학술대회 논문집, 무주리조트, pp. 719-722 , 2005.11.17-18.
44. 구옌 탄텅, 구남서, “압전 작동기를 이용한 마이크로 펌프의 설계 및 제작,” 한국항공우주학회 춘계학술대회 논문집, 강원도 횡성, 현대성우리조트, pp. 556-559, 2006.4.11-12.
45. 란동 마투아, 구남서, “경량 압전 복합재료 작동기를 이용한 끝단 질량을 가진 보의 진동 제어,” 한국군사과학기술학회 종합학술대회 논문집, 인천, pp. 782-785, 2006.8.18.
46. 란동 마투아, 구남서, “경량 압전 복합재료 작동기를 이용한 끝단 질량이 부착된 보의 진동 제어,” 한국복합재료학회 추계학술발표대회 논문집, 인천, pp. 297-301, 2006.11.23.
47. 리광저, 구남서, 변도영, “시뮬레이션을 통한 마이크로 펌프의 전기-유체-구조 상호작용에 대한 연구,” 한국항공우주학회 춘계학술발표대회 논문집, 용평리조트, pp. - , 2007.4.12-13.
48. 구남서, 팜마이, “고토출압 페리스탈틱 마이크로 펌프의 개발,” 대학기계학회 바이오공학부문 춘계학술발표대회 논문집, 제주, pp. 139-140, 2008.5.22-23.
49. 구남서, 판반푸억, 박훈철, “압전 복합재료 작동기를 이용한 유연 로봇팔의 진동제어,” 한국군사과학기술학회 종합학술대회, 포항, p. 226, 2008.8.28-29.
50. 구남서, 팜마이, “소형 LIPCA를 이용한 바이오-의학 응용 페리스탈틱 마이크로펌프 개발,” 한국군사과학기술학회 종합학술대회, 포항, p. 237, 2008.8.28-29.
51. 김태렬, 구남서*, 우성충, 박훈철, “디지털 영상 보정 기법을 이용한 장수풍뎅이 날개의 탄성계수 측정,” 한국항공우주학회 춘계학술대회, 평창, pp. 211-214, 2009.4.16-17.
52. 구남서*, “초기 응력을 가진 압전 복합재료 작동기의 개발과 응용,” 대한기계학회 동역학 및 제어부문 춘계학술대회 논문집, 부산, pp. 53-56, 2009.5.21-22.
53. 구남서, 하넉산, “초소형 생체모방형 스위머 개발,” 대한기계학회 추계학술대회 강연 및 논문 초록집, 용평, pp. 109, 2009.11.4-5.
54. 구남서, 띠앵민드리, “압전-복합재료 발전 소자의 설계 및 특성,” 대한기계학회 추계학술대회 강연 및 논문 초록집, 용평, pp. 210, 2009.11.4-5.
55. 하넉산, 구남서, “생체모방 스위머의 설계, 추력 해석 및 유동 시뮬레이션,” 대한기계학회 바이오공학부문 춘계학술대회 논문집, 제주, pp. 111-112, 2010.4.29-5.1.
56. 구남서, 김태렬, “열변형 계측을 위한 디지털 영상 보정 기법의 적용,” 대한기계학회 추계학술대회 강연 및 논문 초록집, 제주, pp. 584-587, 2010.11.3-5.
57. Nam Seo Goo, Cam Minh Tri Tien, “Wind Energy Harvesting Using a Piezocomposite Generating Element,” 대한기계학회 추계학술대회 강연 및 논문 초록집, 제주, pp. 1283-1284, 2010.11.3-5.
58. 김태렬, 하넉산, 구남서, 김재영, 전호찬, “디지털 영상 보정 기법을 이용한 열변형 측정,” 한국항공우주학회 추계학술대회, 제주, pp. 244-247, 2010.11.11-12.
59. 찬 레안 두안, 현철봉, 구남서, 김재영, 전호찬, 심정연, “IR 센서용 윈도우 냉각장치의 열-유체-구조 연성 해석,” 한국항공우주학회 추계학술대회, 제주, pp. 324-327, 2010.11.11-12.
60. 릉훙뜨륀, 조군, 구남서, “달착륙선의 착륙 모의 해석,” 한국항공우주학회 추계학술대회, 제주, pp. 833-836, 2010.11.11-12.
61. 김태렬, 구남서, “디지털 영상 보정 기법을 이용한 링 구조물의 열변형 측정,” 한국항공우주학회 춘계학술대회, 경주, pp. 888-889, 2011.4.13-15.
62. 구남서, 조군, 릉훙뜨륀 “1/6 달착륙선의 착륙 성능 해석,” 한국항공우주학회 춘계학술대회, 경주, pp. 1172-1174, 2011.4.13-15.
Granted Patent
Granted Patent
특허 출원 및 등록
1. 윤광준, 박훈철, 구남서, “적층형 세라믹 박판 작동층을 갖는 압전세라믹의 압전작동기 구조 및 이의 제조방법,” 특허 출원 (10-2004-0001174, 2004.1.8)
2. Yoon Kwang Joon, Park Hoon Chul, Goo Nam Seo, “Piezoelectric Actuator Structure of Piezoelectric Ceramics Having Laminated Ceramic Actuating Layer and Fabrication Method Thereof,” International App. No. PCT/KR2004/00578, 2004.3.17
3. Yoon Kwang Joon, Yoon Young Soo, Park Hoon Cheol, Goo Nam Seo, “ELECTRO ACTIVE MATERIAL ACTUATOR EMBEDDED WITH INTERDIGITATED ELECTRODES,” International App. No. PCT/KR2005/003417, 2005.10.13
4. 박훈철, 구남서, 모하메드 샤이푸딘, 위구나 테디, “압전 작동기로 구동되는 물고기 로봇,” 특허 출원 (10-2006-0116277, 2006.11.23), 특허 등록 (10-0802354, 2008.2.1)
5. 구남서, “마이크로 펌프,” 특허 출원 (10-2007-0004127, 2007.1.15), 특허 등록 (10-0800171, 2008.1.25)
6. 박훈철, 변도영, 구남서, “생체모사형 날개 장치,” 특허 출원 (10-2009-0001673, 2009.1.8), 특허 등록 (, 2009. .)
7. 구남서, 박훈철, 변도영, 김태렬, 우성충, “탄성계수 측정 시스템 및 그 방법,” 특허 출원 (10-2009-0045750, 2009.5.26), 특허 등록 (10-1018000, 2010.2.21)
8. 하동호, 구남서, 유문식, “압전소자가 구비된 탄성교량받침,” 특허 출원 (10-2009-0092129, 2009.9.29), 특허 등록 (10-1069155, 2011.9.26), PCT 특허출원(PCT/KR2009/007080, 2009.11.30)
9. 구남서, 띠앵민드리, 박훈철, 윤광준, 하동호, “압전-복합재료 발전소자 특성 분석시스템,” 특허 출원 (10-2010-0051686, 2010.6.1), 특허 등록 (10-1055796, 2011.08.03),
10. 박훈철, 구옌코옥비에트, 변도영, 구남서, “날갯짓 비행체의 추진력 측정장치 및 그 방법,” 특허 출원 (10-2010-0095580, 2010.9.30), 특허 등록 (10-1217765, 2012.12.26).
11. Hoon Cheol Park, Quoc Viet Nguyen, Do Young Byun, and Nam Seo Goo, “Flapping Apparatus with Large Flapping Angles,” US Patent No: US8,091,823 B2 (Jan. 10, 2012).
12. 구남서, 릉훙뜨륀, 박훈철, “압전-복합재료 발전 소자를 이용한 자기력 구동형 발전 장치,” 특허 출원 (10-2012-0067661, 2012.6.22), 특허 등록 (10-1251412, 2013.4.1).
13. 이창섭, 고한서, 우장미, 구남서, “밸브조립체 및 이를 구비한 집적형 하이브리드 구동장치 및 이의 운전방법,” 특허 출원 (10-2016-0158567, 2016.11.25), 특허 등록 (10-1878153, 2018.7.9).
14. 구남서, 이영철, “집적형 하이브리드 구동장치 및 이의 제어방법,” 특허 출원 (10-2016-0176839, 2016.12.22).
15. 구남서, 유웅렬, 다오탄둑, “형상 회복 구조물 및 이의 구동 방법,” 특허 출원 (10-2017-0049895, 2017.4.18), 특허 등록 (10-1984256, 2019.5.24).
16. 김홍일, 구남서, 이운규, 이연관, 이대은, “다공성 재료의 열 접촉 저항의 측정 장치 및 방법,” 특허 출원 (10-2018-0044513, 2018.4.17), 특허 등록 (10-2049610, 2019.11.21).
17. 구남서, 레빈퉁, “곤충 시편의 충격 저항력 계측 장치,” 특허 출원 (10-2018-0042406, 2018.4.11), 특허 등록 (10-2059798, 2019.12.20).
18. 구남서, 레빈퉁, “DIC 기법을 이용한 구조물 건전성 모니터링 장치 및 방법,” 특허 출원 (10-2020-0058617, 2020.5.15), 특허 등록 (10-2021-0141227, 2021.11.23).
Google Sites
Report abuse