2025

F Ghani, J Shin, K An, D Lee*, Low-temperature fabrication of S and B co-doped pitch carbon as anode materials for Lithium-ion batteries, Journal of Electroanalytical Chemistry, 119655, 2025

K An, YJ Moon, JY Kim, J Ndikumana*, KT Kang*, ffect of the nitrogen environment on indium gal-lium zinc oxide thin film transistors with low tem-perature ultraviolet annealing, Informacije MIDEM 55 (3), 2025

MJ Ko, E Lee, K An, YB Park, TI Lee*, Laser-Assisted Bonding of Flexible Polymer Substrates and Electrodes Using Carbon Nanotubes, ACS Applied Polymer Materials, 2025

E. Choi, S. Choi, K. An*, K.-T. Kang*, Image-based impedance spectroscopy for printed electronics, npj Flexible Electronics, 9 (1), 11, 2025

2024

D. Y. Shin, C. Kim, Y. J. Moon, K. An*, B. K. Ju*, K.-T. Kang*, Ultrasonic Punching with Inkjet‐Printed Dot Array for Fabrication of Perforated Metal Pattern as Transparent Heater, Advanced Engineering Materials 26 (20), 2400377, 2024

F. Ghani, K. An, D. Lee*, A Review on Design Parameters for the Full-Cell Lithium-Ion Batteries, Batteries, 10 (10), 340, 2024

E. Choi, S. Choi, K. An*, K.-T. Kang*, Deep learning-based inkjet droplet detection for jetting characterizations and multijet synchronization, ACS Applied Materials & Interfaces, 16 (14), 18040-18051, 2024

J. Ndikumana, K. An*, Local mapping of surface potential in pentacene thin film under gate bias voltage obtained by scanning kelvin probe microscopy, Microscopy Research and Technique, 87 (3), 470-475, 2024

J. Ndikumana, K. An*, Spectrally independent and wide-angle light extraction of organic light emitting diodes with randomly disassembled nanostructure, Nanoscale, 16 (32), 15319-15329, 2024

2023

J. Choi, K. Yang, Y. K. Lee, S. Lee, K. An, S. S. Kim*, J. Kim*, Adsorption-induced transient friction of hydrogels on hydrophilic countersurfaces, Physics of Fluids, 35(12), 2023

S. J. Kim, E. Choi, D. Y. Won, G. Han, K. An, K.-T. Kang, S. Kim*, Accelerated deep-learning-based process monitoring of microfluidic inkjet printing, CIRP Journal of Manufacturing Science and Technology, 46, 65-73, 2023

J. Ndikumana, J. Kim, J. Y. Kim, D. Lee, K. An*, A review on 2, 8-difluoro-5, 11-bis (triethylsilylethynyl) anthradithiophene based organic thin film transistor, Flexible and Printed Electronics, 8(2), 023001, 2023

K. An, C. Kim, S. Kim, T. Lee, D. Shin, J. Lim, D. Hahm, W. K. Bae, J. Y. Kim, J. Kwak, J. Kim*, K.-T. Kang*, Randomly Disassembled Nanostructure for Wide Angle Light Extraction of Top‐Emitting Quantum Dot Light‐Emitting Diodes, Small, 19(20), 2206133, 2023

F. Ghani, K. An, D. Lee*, "Effect of Calcination Temperature on the Physicochemical Properties and Electrochemical Performance of FeVO4 as an Anode for Lithium-Ion Batteries", Materials, 16(2), 565, 2022

2022

Y. Noh, G. Y. Kim, H. Lee, J. Shin, K. An, M. Kumar, and D. Lee*, "A review on intense pulsed light process as post-treatment for metal oxide thin films and nanostructures for device application", Nanotechnology, 33(27), 272001, 2022

E. Choi, K. An*, and K.-T. Kang*, "Deep-Learning-Based Microfluidic Droplet Classification for Multijet Monitoring", ACS Applied Materials & Interfaces, 14(13), 15576, 2022

S. I. Lee, D. Lee, and K. An*, "Fabrication of type-variable electronic paper using electrophoretic particle loading with multiple bottom electrode structure", Materials, 15(6), 2289, 2022

C. Kim+, K. An+, M. Kang, P. Won, J.-J. Park, K. H. Cho, S. H. Ko, B.-K. Ju* and K.-T. Kang*, "Facile fabrication of flexible metal grid transparent electrode using inkjet-printed dot array as sacrificial layer ", Scientific Reports, 12(1572), 2022 (+ equally contributed)

K. An, C. Kim, K. H. Cho, S. Bae, B. K. Cha, K.-T. Kang, "Spectral response tuning of organic photodetectors using strong microcavity effects for medical X-ray detector application", Organic Electronics, 100(106384), 2022

2021

K. An+, J. Kim+, H. Lee*, "Liq interlayer as electron extraction layer for highly efficient and stable perovskite solar cells", International Journal of Energy Research 2021(1), 2021 (+ equally contributed)

K. An, H.-N. Lee, K. H. Cho, K.-T. Kang*, “Two-step fabrication of thin film encapsulation layer using laser assisted chemical vapor deposition and laser assisted plasma enhanced chemical vapor deposition for long-lifetime organic light emitting diodes”, Organic Electronics, 91(106078), 2021 

2020

S. Rhee, K. An*, K.-T. Kang*, “Recent Advances and Challenges in Halide Perovskite Crystals in Optoelectronic Devices from Solar Cells to Other Applications”, Crystals, 11(39), 2020 

Y. J. Han, K. D. Y. Kim, K. An, K.-T. Kang, B.-K. Ju, K. H. Cho*, “Sequential improvement from cosolvents ink formulation to vacuum annealing for ink-jet printed quantum-dot light-emitting diodes”, Materials, 13(21), 2020

K. An+*, J. Kim+, M. A. Uddin, S. Rhee, H. Kim, K.-T. Kang, H. Y. Woo* and C. Lee*, “Germinant ZnO nanorods as a charge-selective layer in organic solar cells”, Journal of Materials Science & Technology, 55, 2020 (+ equally contributed)

K. An, D. G. Yoon, K.-T. Kang*, “Origin of the limited efficiency in printed organic light emitting diodes: the polaronic effect of the residual solvent”, Progress in Organic Coatings, 147, 2020

J. Y. Kim, S. Rhee, H. Lee, K. An, S. Biswas, Y. Lee, J. W. Shim, C. Lee, H. Kim*, “Universal elaboration of Al‐doped TiO2 as an electron extraction layer in inorganic–organic hybrid perovskite and organic solar cells”, Advanced Materials Interfaces, 7(10), 2020

J. Song, P. Tyagi, K. An, M. Park, H. Jung, N. Ahn, M. Choi, D. Lee, C. Lee*, “Degradation of electrical characteristics in low-bandgap polymer solar cells associated with light-induced aging”, Organic Electronics, 81, 2020

K. An+, S. Rhee+, H. Lee, K.-T. Kang, C. Lee, J. Kwak*, “Direct observation of crystal engineering in perovskite solar cells in a moisture-free environment using conductive atomic force microscopy and friction force microscopy”, Journal of Physical Chemistry C, 124(9), 2020 (+ equally contributed)

K. An, H.-N. Lee, K. H. Cho, S.-W. Lee, D. Hwang*, K.-T. Kang*, “Role of 193nm ArF excimer laser in laser assisted plasma enhanced chemical vapor deposition of SiNx for low temperature thin film encapsulation”, Micromachines 11(18), 2020

2019

Y. J. Han, K. An, K. T. Kang, B.-K. Ju and K. H. Cho*, “Optical and electrical analysis of annealing temperature of high-molecular weight hole transport layer for quantum-dot light-emitting diodes”, Scientific Reports, 9(10385), 2019

K. An, J. B. Kim, D. G. Yoon, Y.-C. Jeong and K.-T. Kang*, “High speed nozzle jet printing for bendable organic light emitting diodes”, Flexible and Printed Electronics, 4(1), 2019 

H. Shin, J. Roh, J. Song, H. Roh, C.M. Kang, T. Lee, G. Park, K. An, J. Y. Kim, H. Kim, J. Kwak, C. Lee and H. Kim*, “Highly stable organic transistors on paper enabled by a simple and universal surface planarization method”, ACS Advanced Materials Interfaces, 6(8), 2019 

J. Roh, J. H. Ryu, G. W. Baek, H. Jung, S. G. Seo, K. An, B. G. Jeong, D. C. Lee, B. H. Hong, W. K. Bae, J.H. Lee, C. Lee and S. H. Jin*, “Threshold voltage control of multilayered MoS2 field effect transistors via octadecyltrichlorosilane and their applications to active matrixed quantum dot displays driven by enhancement mode logic gates”, Small, 15(7), 2019 

~2018

H. Lee, J. Lim, J. Song, H. Heo, K. An, J. Kim, S. Lee, K. Char, H.-J. Song* and C. Lee*, “CdSe tetrapod interfacial layer for improving electron extraction in planar heterojunction perovskite solar cells”, Nanotechnology, 30(6), 2018 

J. Lee+, K. An+, P. Won, Y. Ka, H. Hwang, H. Moon, Y. Kwon, S. Hong, C. Kim, C. Lee and S. H. Ko*, “A dual-scale metal nanowire network transparent conductor for highly efficient and flexible organic light emitting diodes”, Nanoscale, 9, 2017 (+ equally contributed)

K. An+, S. Hong+, S. Han, H. Lee, J. Yeo and S. H. Ko*, “Selective sintering of metal nanoparticle ink for maskless fabrication of an electrode micropattern using a spatially modulated laser beam by a digital micromirror device”, ACS Applied Materials and Interfaces, 6(4), 2014 (+ equally contributed)

S. Hong, J. Yeo, W. Manorotkul, G. Kim, J. Kwon, K. An and S. H. Ko*, “Low-temperature rapid fabrication of ZnO nanowire UV sensor array by laser-induced local hydrothermal growth”, Journal of Nanomaterials - Special issue on nanostructured materials for electronics and photonics, 2, 2013