How We Research
Updated: 2026-09-27 · 7 min read · Independent comparison
If you want a single desk station that stores and rotates your controllers and headphones so switching gear between play sessions is grab-and-go, choose Kosker Headset Stand 4; if you need to switch the actual audio signal between two 3.5mm sources or two pairs of headphones without unplugging anything, choose Cubilux 3.5mm.
• Kosker Headset Stand 4 — biggest strength: a four-tier, 360°-rotating vertical tower with a heavy-duty metal base that holds controllers (PS5, PS4, Xbox, Switch 2, PS Portal) plus a phone and a headset in one footprint.
• Kosker Headset Stand 4 — biggest trade-off: it's a physical organizer, not an audio device. It changes what's in your hand, never what's playing in your ears. It's also a real piece of furniture at 17.41" tall and 2.2 pounds.
• Cubilux 3.5mm — biggest strength: a passive, bidirectional A/B toggle that routes one 3.5mm jack between two devices or splits one source to two headphones, with zero power and zero software.
• Cubilux 3.5mm — biggest trade-off: it's tiny and signal-only. It won't hold anything, and with powered speakers a deselected channel can hum because the passive circuit leaves that input floating.
• Who each pick is for: Kosker for the gamer whose desk is drowning in controllers and headsets; Cubilux for the person tired of crawling behind the PC to swap a 3.5mm plug.
The Kosker Headset Stand 4 is an organizer first and everything else second, and that's exactly the point. Four tiers rise off a heavy-duty metal base in a triangular structure meant to shrug off the weight of bulky gaming headphones. The whole tower rotates a full 360°, so the controller you want swings around to you instead of you reaching over a pile of clutter. A single stand covers PS5, PS4, Xbox, Switch 2, PS Portal, popular third-party controllers, and a phone. The product listing even mentions the 12-pack controller angle, so if you keep a small armory of pads charged and ready, this is the rack that keeps them visible and separated.
Buy it if your "switch headphones" moment is physical: you finish a session, hang the headset on the tower, grab a different controller, and rotate to the next one. The vertical design is genuinely space-saving on a crowded desk, and assembly is a few minutes with the included hardware and manual. At 8.39" x 8.39" x 17.41" it needs vertical clearance, but barely any desk depth. The 2.2-pound weight and metal base are what keep it from tipping when you yank a controller off a tier.
Skip it if your problem is cables, not clutter. This stand will not switch audio between your PC and your console, and it won't let two people share one pair of headphones. It holds gear; it doesn't route signal. If your desk is already tidy and your actual pain is unplugging a 3.5mm jack every time you move from PC to console, the Kosker solves a problem you don't have.
The Cubilux 3.5mm Audio Selector is the opposite kind of tool: invisible, pocket-sized, and entirely about signal. It's a bidirectional 3.5mm TRS switcher, which means it works two ways. In 2-in-1-out mode you connect two sources — say a PC and a console — and toggle which one feeds your headphones. In 1-in-2-out mode you connect one source and route it to two pairs of headphones, which is the classic "share one movie, two headsets" setup. The mechanical toggle gives clear feedback: flip left for the left port, right for the right. No power, no drivers, no software.
The build is a full aluminum enclosure with an anti-slip pad on the bottom so it stays put when you flick the switch. It measures just 1.65 x 1.14 x 0.51 inches, so it disappears next to a keyboard or in a bag. Two 3-foot 3.5mm TRS shielded cables are included, which is what makes it truly ready out of the box — you're not hunting for a second cable before it works.
Buy it if you're constantly moving one headset between a desktop, a laptop, a console controller, or an audio interface, and you're tired of the reach-around. It also suits a minimalist desk where a full audio interface is overkill. The honest caveats: it's designed primarily for headphone switching, and if you leave powered speakers connected and switch away from them, that deselected input floats and can pick up hum — a known trait of passive switching, not a defect. And if you use a TRRS headset with a mic, it can pass the mic signal, but you'll need TRRS-to-TRRS cables, which aren't included. Mixing TRS and TRRS can also make a computer favor the TRS signal.
Skip it if you want one device to hold your gear and manage your audio. That's not what this is.
• Best for decluttering a gaming desk → Kosker Headset Stand 4. Four rotating tiers for controllers, a phone, and a headset.
• Best for switching the actual audio between two devices → Cubilux 3.5mm. That's its entire job, and it does it with one toggle.
• Best for sharing one pair of headphones between two people → Cubilux 3.5mm. Run it 1-in-2-out.
• Best for heavy or bulky gaming headsets → Kosker Headset Stand 4. The triangular structure and metal base are built for that weight.
• Best for travel or a tiny desk → Cubilux 3.5mm. Pocket-sized aluminum, two cables included.
• Best for a mic-equipped headset → Cubilux 3.5mm, with a caveat. It can pass TRRS mic signals, but only with TRRS-to-TRRS cables you supply.
• Best if you hate installing things → Cubilux 3.5mm. No power, no software, no setup.
• Best if you like a visible, matching gaming setup → Kosker Headset Stand 4. The rotating black tower is meant to be seen.
If I had to pick one, I'd buy the Kosker Headset Stand 4 — but only because the question I'm answering is a desk problem, and a rotating four-tier tower fixes more of my daily friction than a switch box would. In my opinion it's the better pick for a console-and-controller gamer whose headset moves between sessions, not between devices. The Cubilux 3.5mm is the smarter buy the moment your pain is an audio jack you keep reaching behind the PC to move. They solve different problems, and honestly, plenty of people would want both. Check the current price on Amazon before you commit, since that's the one thing that can flip this call either way.
how to switch headphones left right
On the Cubilux 3.5mm, the toggle does this literally: flip it left to activate the left port, right for the right port, with clear mechanical feedback so you always know which channel is live. On the Kosker Headset Stand 4, "switching" is physical — you rotate the 360° tower to reach the headset or controller you want. Neither device changes left/right audio balance; the Cubilux just selects which port is active.
how to switch headphones between devices
Plug both devices into the Cubilux 3.5mm in 2-in-1-out mode, connect your headphones to the output, and toggle between them. It's passive, so there's nothing to power or configure. If your devices use TRRS headsets with mics, you'll need TRRS-to-TRRS cables, which aren't included. The Kosker stand doesn't switch audio between devices at all — it only stores the gear.
how to switch headphones to headset windows 11
Windows 11 handles the software side through its sound output settings; the Cubilux handles the hardware side. If you keep your headset plugged into the selector and toggle to the port your PC feeds, Windows sees a live 3.5mm connection without you replugging anything. No driver install is needed because the Cubilux is a passive mechanical switch, not a USB audio device.
how to switch headphones to speakers on computer
The Cubilux can route between a headset and speakers, but be aware of one quirk: when you switch away from powered speakers, that deselected input floats and can hum, because the passive circuit isn't filtering an unselected channel. It's a normal characteristic of passive switching with powered speakers rather than a fault. If hum bothers you, unplug the speakers when they're not in use.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: ROPASOMIC Bone Conduction Headphones vs Vaparinckl Bone Conduction Hea, PreSonus Eris HD6BT vs Feiltik Swimming Headphones Underwater, Duyfioa Replacement Ear Pads vs Hmoke Replacement Ear Pads, Fachixy FC100 vs CUIWHRL Controller Stand Wood