We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-19 · 6 min read · Independent comparison
If you want replacement pads for the newer, larger JBL Tune over-ears (700BT through 770NC) in a red finish with a full install tool kit, choose Duyfioa Replacement Ear Pads; if you need pads for the older on-ear Tune 600/660/670 family in black with a thicker memory-foam build, choose Hmoke Replacement Ear Pads.
• Duyfioa — biggest strength: Covers six popular JBL Tune models (700BT, 710BT, 720BT, 750BTNC, 760NC, 770NC) and ships with two removal tools (a pry pick and a triangle opener) for a clean swap.
• Duyfioa — biggest trade-off: Only fits that specific Tune list — it will not fit the JBL Live series or the older 600/660/670 models, and it comes in red only.
• Hmoke — biggest strength: Extra-thick, high-density slow-rebound memory foam with textured PU leather, sized for the Tune 600/660/670 on-ear and over-ear models.
• Hmoke — biggest trade-off: Narrow compatibility — it does not fit the 700/710/720/750/760/770 line, and it comes in black only.
• Who each pick is for: Duyfioa for owners of the newer Tune 700-series and 770NC headphones who want a like-original red cover; Hmoke for owners of the older Tune 600/660/670 who want a plusher, thicker cushion.
Duyfioa's pads are a targeted repair part. The compatibility list is explicit: JBL Tune 700BT, 710BT, 720BT, 750BTNC, 760NC and 770NC. That's it. The listing is equally clear about what it won't fit — the JBL Live series, including the Live 770NC, is called out as incompatible despite the similar model number. If your headphones are on that Tune list, you're in the right place; if they aren't, keep looking.
The build is memory foam wrapped in protein leather, with added thickness so the cushion rests against your head rather than pressing your ears flat. Duyfioa describes the size as matching the original, which matters for a snap-in part: the clips need to line up with the housing or the pad won't seat. The color is red, so this is a look change as much as a repair — the "give your headset a brand new look" angle is a real selling point if your originals have gone shiny or flaky.
Installation is the part I'd actually weigh. You get two tools — a pry pick and a triangle opener — and the process is: work the pry bar into the gap between the earphone and the cup, peel the old pad off slowly, clean the surface, sort left from right, align the clips, press until you hear a click. That click is your confirmation. No click, no seat.
Buy it if you own a Tune 700BT/710BT/720BT/750BTNC/760NC/770NC and want a red replacement that mirrors the original fit. Skip it if you own a JBL Live model, an older Tune 600-series, or you want black pads.
Hmoke goes the other direction on the model list: Tune 600 (T600BTNC / 600BTNC), 660 (T660NC / 660NC) and 670 (T670NC / 670NC). The listing notes these fit both on-ear and over-ear versions of those headphones, which is worth reading twice if you're unsure which you own — the fit matters more on an on-ear pad, where the cushion sits directly against the ear rather than around it.
The material story here is the headline. Hmoke uses high-density slow-rebound memory foam with textured PU leather, and the marketing leans on "extra thick" and "no swelling, no pain" during long wear. Slow-rebound foam is the type that compresses slowly under pressure and returns slowly — the practical effect is that it molds to the shape of your ear instead of fighting it. The color is black, which is the safe, matches-everything choice.
Installation is described as tool-free in the sense that no special tools are needed, though Hmoke does include a plastic tool to help you pry the old pads off and press the new ones in. The company says a few minutes is realistic, and that tracks with a clip-in design. Hmoke also positions this as a "why buy new headphones" fix — a fair framing for a wearable part that wears out long before the drivers do.
Buy it if you own a Tune 600, 660 or 670 and want a thicker, softer cushion than stock in basic black. Skip it if your headphones are the 700-series or 770NC, or you specifically want a color other than black.
• Best for the newer Tune line (700BT–770NC) → Duyfioa Replacement Ear Pads. That's its entire compatibility list.
• Best for the older Tune 600/660/670 family → Hmoke Replacement Ear Pads. Different models, different pad geometry.
• Best for a thicker, plusher cushion → Hmoke. "Extra thick" with high-density slow-rebound memory foam is the core of its design.
• Best for a color change → Duyfioa. Red versus Hmoke's black — pick based on the look you want.
• Best installation kit → Duyfioa. Two tools (pry pick plus triangle opener) versus Hmoke's single plastic removal tool.
• Best for on-ear Tune models → Hmoke. It explicitly covers the on-ear 600/660/670 variants.
• Best for over-ear Tune models → Duyfioa. All six of its supported models are over-ear wireless headphones.
• Best warranty confidence → a tie. Both list a 1-year manufacturer warranty.
In my opinion, the decision here isn't about quality — it's about which headphones you own, and that's decided before you read a single word of marketing. If you have a Tune 700BT, 710BT, 720BT, 750BTNC, 760NC or 770NC, I'd buy the Duyfioa pads: the fit is matched to your model, the two-tool kit makes the swap cleaner, and the red gives you a visible refresh. If you have a Tune 600, 660 or 670, I'd buy the Hmoke pads for the thicker slow-rebound foam and the black finish that disappears into the headphone. Neither is a universal part, so check your model number on the headband or in your Bluetooth settings first. Once you've confirmed it, check the current price on Amazon with the button on this page and go with the one that matches.
No. Duyfioa lists only the Tune 700BT, 710BT, 720BT, 750BTNC, 760NC and 770NC. For the Tune 600, 660 or 670, the Hmoke pads are the correct match.
No. Hmoke is built for the Tune 600 (T600BTNC/600BTNC), 660 (T660NC/660NC) and 670 (T670NC/670NC). The 770NC is outside that list and needs Duyfioa pads.
Hmoke describes its cushions as extra thick with high-density slow-rebound memory foam. Duyfioa also notes added thickness with memory foam and protein leather, but Hmoke leans harder on the thickness claim.
Duyfioa includes a pry pick and a triangle opener and walks you through a four-step peel-clean-align-press process. Hmoke says no special tools are needed but includes a plastic tool to help remove the old pads. Both are clip-in designs, so you press until you hear the pad seat.
Check the model number printed on the headband or shown in your phone's Bluetooth device list. Both pads are model-specific, and neither brand claims a universal fit across the Tune range.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.