B.J. Kim, Y. J. Son and S.H. Lee "Thermal Stress Analysis of Anti-Scatter Film Using Adhesive Interface Modeling"  Journalof Mechanical Science and Technology (2025): In Press

S.Y. Kim, and S.H. Lee "Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride"  Journal of Nuclear Fuel Cycle and Waste Technology (2025): 23(2), 149-162

S.Y. Kim and S.H. Lee "Simplified models for high burnup spent nuclear fuel rods and their comparison" Nuclear Engineering and Design (2025): 114032

G.H. Jeong and S.H. Lee "Sub-modeling numerical analysis on the radionuclide release from a transport cask submerged in the deep sea" Annals of Nuclear Energy 201 (2024) 110438

S.Y. Kim and S.H. Lee "Methodology for numerical evaluation of fracture resistance under pinch loading of spent nuclear fuel cladding containing reoriented hydrides" Nuclear Engineering and Technology 56.6 (2024): 1975-1988. 

S.Y. Kim, N.H. Kim and S.H. Lee "Study on Lamb wave propagation in a cracked plate using numerical simulations"  Journal of Mechanical Science and Technology 37.8 (2023): 4217-4225.

G.T. Lee, S.H. Lee and N.H. Kim "A study on model calibration using sensitivity based least squares method"  Journal of Mechanical Science and Technology 36.2 (2022): 809-815.

S.Y. Kim and S.H. Lee  "Simplified Model of a High Burnup Spent Nuclear Fuel Rod under Lateral Impact Considering a Stress-Based Failure Criterion"  Metals 11.10 (2021): 1631.

S.H. Lee and S.Y. Kim "Development of equivalent beam model of high burnup spent nuclear fuel rods under lateral impact loading"  Metals 10.4 (2020): 470.

B. Almomani, S.Y. Kim, D.C. Jang and S.H. Lee "Parametric study on the structural response of a high burnup spent nuclear fuel rod under drop impact considering post-irradiated fuel conditions"  Nuclear Engineering and Technology 52.5 (2020): 1079-1092.

S.H. Lee and S.Y. Kim "Simplified beam model of high burnup spent fuel rod under lateral load considering pellet-clad interfacial bonding influence"  Nuclear Engineering and Technology 51.5 (2019): 1333-1344.

S.H. Lee "Reliability based design optimization using response surface augmented moment method" Journal of Mechanical Science and Technology 33 (2019): 1751-1759. 

B. Almomani, D.C. Jang and S.H. Lee  "Structural integrity of a high-burnup spent fuel rod under drop impact considering pellet-clad interfacial bonding influence"  Nuclear Engineering and Design 337 (2018): 324-340.

B. Almomani, D.C. Jang, S.H. Lee and H.G. Kang "Development of a probabilistic safety assessment framework for an interim dry storage facility subjected to an aircraft crash using best-estimate structural analysis" Nuclear Engineering and Technology 49.2 (2017): 411-425.

M.R. Yun, R. Christian, B.G. Kim, B. Almomani, J.H. Ham, S.H. Lee and H.G. Kang  "A software tool for integrated risk assessment of spent fuel transportation and storage"  Nuclear Engineering and Technology 49.4 (2017): 721-733.

B. Almomani, S.H. Lee, D.C. Jang and H.G. Kang "Probabilistic risk assessment of aircraft impact on a spent nuclear fuel dry storage" Nuclear Engineering and Design 311 (2017): 104-119.

B. Almomani, S.H. Lee and H.G. Kang "Structural analysis of a metal spent-fuel storage cask in an aircraft crash for risk assessment"  Nuclear Engineering and Design 308 (2016): 60-72.

S.H. Lee, W.S. Choi and K.S. Seo "Safety assessment of a metal cask under aircraft engine crash"  Nuclear Engineering and Technology 48.2 (2016): 505-517.

K.S. Bang, S.H. Yu, S.H. Lee, J.C. Lee and K.S. Seo "Experimental investigation of heat removal performance of a concrete storage cask"  Annals of nuclear energy 85 (2015): 679-686.

Y.J. Son, S. Y. Kim and S.H. Lee "A framework for fuel damage ratio calculation in spent nuclear fuel transportation" Journal of Nuclear Fuel Cycle and Waste Technology 23.1 (2025): 25-42

I.G. Jang and S.H. Lee "A Study on the Drop Impact Analyses and Design Improvement of Boiler Package" Trans. Korean Soc. Mech. Eng. A, 47.9 (2023): 763-770

G.H. Jeong and S.Y. Kim and S.H. Lee "Development of Model to Evaluate Thermal Fluid Flow Around a Submerged Transportation Cask of Spent" Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT) 20.4 (2022): 411-428

S.H. Lee and W.J. Kim "A Study on Accelerated Fatigue Life Testing for Industrial Inverter" Journal of the Korean Society of Manufacturing Process Engineers 21.6 (2022): 67-73

J.H. Seo, S.H. Lee " Shape Design of Hinge Stopper to Improve Refrigerator Door Opening Force". Journal of the Korean Society of Manufacturing Process Engineers 20.7 (2021): 66-71.

S.H. Lee "Safety Assessment of Aircraft Crash Accident Into Spent Nuclear Fuel Dry Storage Facility-A Review With Focus on Structural Evaluation" Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT) 17.2 (2019): 263-278.

G.T. Lee and S.H. Lee "Improvement of Packaging Performance for Industrial Invertor" Trans. Korean Soc. Mech 44.2 (2020): 141-148.

 J.H. Seo and B.Y. Lee and S.H. Lee "Shape Optimal Design of Anti-vibration Rubber Assembly in Tractor Cabin Using Taguchi Method" Journal of the Korean Society of Manufacturing Process Engineers 18.4 (2019): 34-40.

H.J. Choi and S.H. Lee "Shape optimal design of anti-vibration rubber assembly to reduce the vibration of a tractor cabin" Journal of the Korea Academia-Industrial Cooperation Society 19.4 (2018): 657-663.

H.S. Kim and B.Y. Lee and S.H. Lee "Drop Impact Analysis of Outside Cooling Unit Package of System Air-Conditioner and Experimental Verification" Journal of the Korea Academia-industrial Cooperation Society 19.4 (2018): 111-116.

S.H. Lee and D.S. Yook "Review of spent nuclear fuel dry storage demonstration programs in US" Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT) 15.2 (2017): 135-149.