Feasibility design and experimental  research of wireless current charging unit with high efficiency by photovoltaic  energy for superconducting hyperloop train , Journal of Mechanical Science and Technology, 34(4), 2025.

Development and Evaluation of an Inductive Coupling-Based Contactless Current Charging System for High-Temperature Superconductor Coils, IEEE Transactions on Applied Superconductivity, 35(5), 2025.

Application of Electrically-Conductive Epoxy in No-Insulation Coils for Controlling Contact Resistance, IEEE Transactions on Applied Superconductivity, 35(5), 2025.

Investigation of the Effects of Dampers on the Dynamic Characteristics of an Axial-Flux HTS Machine With an NI HTS Field Coil, IEEE Transactions on Applied Superconductivity, 35(5), 2025.

Harmonic errors of a 9.4 T all REBCO NMR magnet afected by screening current and geometric inconsistency of coated conductors, scientific reports, 14, 2024.

Experimental Study on a Current Sweep Method Combined with Thermal Cycle for Mitigation of Screening Current-induced Field in a Conduction-Cooled REBCO Magnet, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Contact Resistance and Over-Current Characteristics of No-Insulation High-Temperature Superconducting Coils Impregnated With an Electrically-Conductive Epoxy, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Optimal Design Method of a Wireless Charging system for HTS magnets using a Genetic Algorithm, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Genetic-Algorithm-based Room-Temperature Shimming and Long-term Operational Protocol for a KBSI 400 MHz all-HTS NMR magnet, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Exploring the Effects of Partial Electrical Connectors on HTS Coils: A Case Study of Insulated Coil and Paraffin-Impregnated NI Coil, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Advancing Magnetic Field Homogeneity in 9.4 T Non-NMR Magnet With Ferromagnetic Shimming, IEEE Transactions on Applied Superconductivity, 34(5), 2024.

Experimental Study of a Room-Temperature Shimming Technology Employing Genetic Algorithm for NMR/MRI Superconducting Magnets, IEEE Transactions on Applied Superconductivity, 33(5), 2023.

A Study of the Dynamic Characteristics of an Electrical Rotating Machine Applying No-Insulation HTS Field Coils,  IEEE Transactions on Applied Superconductivity, 33(5), 2023.

Design and Characteristic Analysis of an Inductive Link for Wireless Current Charging of a HTS Magnet, IEEE Transactions on Applied Superconductivity, 32(6), 2022.

A Feasibility study of an Optimization-based Active Field Uniformity Compensation Method For Superconducting Magnets, IEEE Transactions on Applied Superconductivity, 32(6), 2022.

Design and Characteristics Analysis of a Homopolar Synchronous Machine Using a NI HTS Field Coil, Energies, 14(8), 2021.

Thermally conductive composites with hydroxylated boron nitrides for the efficient thermal management of superconducting coils, Composites Part B: Engineering, 225(15), 2021.

Real-Time Abnormal-Signal Detection Under a Noisy Environment Using a Resonance Filter, IEEE Transactions on Instrumentation and Measurement , 70, 2021.

Development of a Cryogen-Free Compact 3T Superconducting Magnet for an Electromagnetic Property Measurement System, ‪Applied Sciences, 11(7), 2021.

Epoxy-based thermally conductive adhesives with effective alumina and boron nitride for superconducting magnet, ‪Composites Science and Technology, 200(10), 2020.

Performance Evaluation of Current Leads for a 5 Tesla Electromagnetic Properties Measurement System, Applied Sciences, 10(19), 2020.

Design and Quench Protection Analysis of a 9 T NbTi Superconducting Magnet for a Large-Bore EMPS, IEEE Transactions on Applied Superconductivity, 30(4), 2020.

Overhang Effect Analysis of a Homopolar HTS Synchronous Generator Using 3D Finite Element Method, IEEE Transactions on Applied Superconductivity, 30(4), 2020.

A New Method to Improve Field Uniformity for Application to a Newly Developed 5 T EMPS Superconducting Magnet System, IEEE Transactions on Applied Superconductivity, 30(4), 2020.

Reproducibility of the field homogeneity of a metal-clad no-insulation all-REBCO magnet with a multi-layer ferromagnetic shim, Superconductor Science and Technology, 33(2), 2020.

A Flux-Controllable NI HTS Flux-Switching Machine for Electric Vehicle Applications, Applied Sciences, 10(5), 2020.

Design and Analysis of a Novel Magnetic Coupler of an In-Wheel Wireless Power Transfer System for Electric Vehicles, Energies, 13(2), 2020.

A New Outer-Rotor Hybrid-Excited Flux-Switching Machine Employing the HTS Homopolar Topology, Energies, 12(14), 2019.

Field Measurement and Analysis of a 3 T 66 mm No-Insulation HTS NMR Magnet with Screening Current and Manufacturing Uncertainty Considered, IEEE Transactions on Applied Superconductivity, 29(5), 2019.

Experimental study of the effect of the current sweep cycle on the magnetic field stability of a REBCO coil, Cryogenics, 89, 2018.

A High-Resolution Magnetometer Over a Wide Homogeneity Range, IEEE Transactions on Applied Superconductivity, 28(3), 2018.

Analytic Study of the Active Quench Detection Method for High-Temperature Superconducting Magnet Using Resonance Circuit, IEEE Transactions on Applied Superconductivity, 28(3), 2018.

 Feasibility Study of a Multipole Electromagnet Using a Parallel Iron-Core Structure, IEEE Transactions on Applied Superconductivity, 28(3), 2018.

 Thermal stability analysis of a superconducting magnet considering heat flow between magnet surface and liquid helium, Physica C: Superconductivity and its Applications, 550, 2018.

Quench behavior of a no-insulation coil wound with stainless steel cladding REBCO tape at 4.2 K, Superconductor Science and Technology, 30(7), 2017.

Characteristic Analysis of an HTS Flux-Switching Synchronous Generator With NI-Type HTS Field Coils, IEEE Transactions on Applied Superconductivity, 28(3), 2017.

Design, construction and 13 K conduction-cooled operation of a 3 T 100 mm stainless steel cladding all-REBCO magnet, Superconductor Science and Technology, 30(10), 2017.

Experimental Study on a Conduction Cooling System for an HTS NMR Magnet, IEEE Transactions on Applied Superconductivity, 27(4), 2017.

Three-dimensional numerical simulation employing normal zone propagation velocity on heat propagation of LTS magnet under quench process, IEEE Transactions on Applied Superconductivity, 27(4), 2017.

Feasibility study of the impregnation of a no-insulation HTS coil using an electrically conductive epoxy, IEEE Transactions on Applied Superconductivity, 27(4), 2017.

Design and performance estimation of a 35 T 40 mm no-insulation all-REBCO user magnet, Superconductor Science and Technology, 30(6), 2017.

Optimal Design and Multicoils Quench Analysis of the EMPS Superconducting Magnet Employing Hybrid Genetic Algorithm, IEEE Transactions on Applied Superconductivity, 28(3), 2017.

Feasibility study for reduction of the screening current induced field in a 2G high temperature superconducting coil, Superconductor Science and Technology, 29(1), 2016.

A study on mitigation of screening current induced field with a 3-T 100-mm conduction-cooled metallic cladding REBCO magnet, IEEE Transactions on Applied Superconductivity, 27(4), 2016.

Operational characteristics of HTS coils with flux diverters in semipersistent mode under alternating magnetic field, IEEE Transactions on Applied Superconductivity, 26(4), 2016.

Persistent current mode operation of a 2G HTS coil with a flux pump, IEEE Transactions on Applied Superconductivity, 26(4), 2016.

A feasibility study of full-bridge type superconducting fault current controller on electric machine power stability, Superconductor Science and Technology, 29(2), 2015.

Effects of AC Disturbance on Cowinding HTS Coils According to the Inserted Materials, IEEE Transactions on Applied Superconductivity, 25(3), 2015.

Quench detection method for HTS coils using electromagnetically coupled coils, IEEE Transactions on Applied Superconductivity, 25(3), 2014.

The effects of co-wound Kapton, stainless steel and copper, in comparison with no insulation, on the time constant and stability of GdBCO pancake coils, Superconductor Science and Technology, 27(6), 2014.

 A study on the normal zone propagation velocity of the racetrack type coil with difference shapes of coil bobbin, IEEE Transactions on Applied Superconductivity, 23(3), 2013.

Electromagnetic design of a 15 MW-class HTS flux switching synchronous generator considering mechanical stress of the rotor core, IEEE Transactions on Applied Superconductivity, 24(3), 2013.

Conceptual design of superconducting linear synchronous motor for 600-km/h wheel-type railway, IEEE Transactions on Applied Superconductivity, 24(3), 2013.

Experimental study of the effects of alternating fields on HTS coils according to the winding insulation conditions, Superconductor Science and Technology, 26(8), 2013.

Evaluation on electrical and thermal characteristics of multi-stacked HTS coated conductor with various stabilizers, IEEE Transactions on Applied Superconductivity, 24(3), 2013.

Quench protection for HTS current leads by adding connected HTS bridges, IEEE Transactions on Applied Superconductivity, 24(3), 2013.

Operating characteristics of contactless power transfer from HTS antenna to copper receiver with inserted resonator through large air gap, IEEE Transactions on Applied Superconductivity, 24(3), 2013.

Evaluations on AC electrical characteristics of no-insulation coil for power devices, IEEE Transactions on Applied Superconductivity, 23(3), 2012.

A study on recovery characteristics of joined tapes from the view of thermal and electrical variation for superconducting magnets, IEEE Transactions on Applied Superconductivity, 22(3), 2012.

Experimental study of the new type of HTS elements for current leads to be applied to the nuclear fusion devices, IEEE Transactions on Applied Superconductivity, 22(3), 2012.

Characteristic comparison for the various winding methods of HTS magnets, IEEE Transactions on Applied Superconductivity, 22(3), 2012.

Effects and properties of contactless power transfer for HTS receivers with four-separate resonance coils, IEEE Transactions on Applied Superconductivity, 23(3), 2012.

A study on the superconducting synchronous generator with the fixed-type field coil, IEEE Transactions on Applied Superconductivity, 23(3), 2012.

Design, fabrication, and operating test of the prototype HTS electromagnet for EMS-based maglev, IEEE Transactions on Applied Superconductivity, 22(3), 2012.

A study on the loss in a superconducting magnet by the control current in a hybrid electro-magnetic suspension system, IEEE Transactions on Applied Superconductivity, 22(3), 2012.

The Manufacture and Test of a GdBCO Insert Coil for an 11 T Superconducting Magnet, IEEE Transactions on Applied Superconductivity, 23(3), 2012.

Experimental analysis of AC loss and recovery characteristics for proposal of effective thickness of spacers in pancake type, Cryogenics, 51(6), 2011.

Characteristics of persistent-current mode of HTS coil on superconducting electromagnet, Physica C: Superconductivity and its applications, 471(21-22), 2011.

The effect of operating temperature on transport AC loss according to an YBCO superconducting tape array geometry, IEEE Transactions on Applied Superconductivity, 21(3), 2011.

Experimental study on the lightning impulse dielectric characteristics of sub-cooled liquid nitrogen for a high voltage superconducting fault current limiter, , IEEE Transactions on Applied Superconductivity, 21(3), 2011.

A Study on Prototype Hybrid (LTS/HTS) Magnet for NMR Application, Journal of Magnetics, 16(3), 2011.

A study on the shape of iron-core for a hybrid electro-magnetic suspension system, IEEE Transactions on Applied Superconductivity, 22(3), 2011.

A study on the no insulation winding method of the HTS coil, , IEEE Transactions on Applied Superconductivity, 22(3), 2011.

Transition criteria for critical current measurement of high temperature superconductor in AC circumstance, IEEE Transactions on Applied Superconductivity, 22(3), 2011.

Design, manufacture and performance evaluation of HTS electromagnets for the hybrid magnetic levitation system, Physica C: Superconductivity and its applications, 471(21-22), 2011.

Design and tests of prototype hybrid superconducting fault current limiter with fast switch, IEEE Transactions on Applied Superconductivity, 22(3), 2011.

Experimental study on the electrical breakdown characteristics of sub-cooled liquid nitrogen for designing a high voltage superconducting machine , IEEE Transactions on Applied Superconductivity, 20(3), 2010.

Conceptual design for HTS coil in superconducting electromagnet for Maglev, IEEE Transactions on Applied Superconductivity, 21(3), 2010.

Design of a superconducting magnet system using a cryogenic magnetic coupler for contactless current charging , Journal of Advanced Marine Engineering and Technology, 46(6), 2022

A Double Helix Flux Pipe-Based Inductive Link for Wireless Charging of Electric Vehicles, World Electric Vehicle Journal, 11(2), 2020.

Performance evaluation on Fault Current Controller System for the Applications of Smart Grid, Progress in Superconductivity and Cryogenics, 14(2), 2012.

A Study on the Winding Method for Reducing Joints of the High Temperature Superconducting Double Pancake Coil, Progress in Superconductivity and Cryogenics, 14(1), 2012.

Design Method for HTS Wire Length of the Small Scale Resistive Type Superconducting Fault Current Limiter Considering System Resistance, Progress in Superconductivity and Cryogenics, 13(3), 2011.

Experimental and Analytical Studies on the Characteristics of Fast Switch in Combinations of Various Superconducting Tapes, Progress in Superconductivity and Cryogenics, 13(1), 2011.

Experimental Study on the High Temperature Superconductor for Investigated Design Factors of Distribution and Transmission Level Resistive Type Superconductor Fault Current Limiter, Progress in Superconductivity and Cryogenics, 13(3), 2011.

Design of Prototype Superconducting Hybrid Electromagnet for High Speed Maglev, Progress in Superconductivity and Cryogenics, 13(3), 2011.

 A Study on AC loss Characteristics of Asymmetric non-inductive coils with Combination of Superconducting wires, Progress in Superconductivity and Cryogenics, 13(1), 2011.

A Study on the Design on Iron-Core Shape for Superconducting Hybrid Electro-Magnet System, Progress in Superconductivity and Cryogenics, 13(1), 2011.

 Quench and Recovery Characteristics of Non-Inductively Wound HTS Coils with Various Winding, Progress in Superconductivity and Cryogenics, 12(1), 2010.

A Study on the Characteristic Evaluation of An HTS Coil with respect to the Winding Methods, Progress in Superconductivity and Cryogenics, 12(4), 2010.

A Study on the Characteristics of Voltage Distribution of Stacked YBCO Coated Conductors in Series Connection, Progress in Superconductivity and Cryogenics, 11(4), 2009.

Charging and Persistent-Current Mode Operating Characteristics of BSCCO Magnet Using High-Tc Superconducting Power Supply, Progress in Superconductivity and Cryogenics, 11(1), 2009.