32. Parameter determination for crystal plasticity simulations for dual-phase steel via deep learning, In preparation

31. Comprehensive analysis of neural network architectures for indentation plastometry, In preparation

30. The influence of electron-beam excited electrons on the athermal softening processes of fused silica, In preparation

29. Hole expansion ratio derived from tensile flow based on numerical simulations and deep learning, In preparation

28. Identifiability analysis of parameters in advanced yield function via deep learning-based reverse engineering, In preparation

27. Effect of nitriding treatment on the surface gradient structure of Ti-based ceramic-metal composites, In preparation

26. Robust deep learning approach for determining parameters of crystal plasticity constitutive law from stress-strain curves, In preparation

25. Paradoxically retarded phase evolution by electrical athermal effect, In preparation

24. Thermally activated migrating boundary-induced plasticity: Mechanistic and predictive framework across atomistic-to-macroscopic scales, Under review

23. Indentation-informed convolutional neural network for simultaneous prediction of residual stress and plastic flow, Under review

22. Unexpected microstructural evolution of FeCrAl heat-resistant alloy under electrical heating: Potential risks in industrial electrification, Under review

21. Phase Stability in Metals under Electric Current: The Role of Defect-induced Charge Imbalance, Under review

20. Thermomechanics of picoliter liquids encapsulated in metal microarchitectures, Under review

19. Copper lattice-embedded steel composite: One-step fabrication and its thermal and mechanical properties

Y. H. Cho1, D. Choi1, K. Jeong, Y. Kim, M. Park, S. Lee, H. Choi, I.-S. Choi, S.-G. Kang*, H. N. Han*

Journal of Materials Research and Technology, 37, 89-101 (2025)

18. Effect of the Ni plating on Al-Cu dissimilar metal laser welded joint

H.-M. Sung, S. Lee, D. Lee, H. Kim, S.-G. Kang, G.-D. Lee, K. Jeong*, H. N. Han*

Journal of Materials Science and Technology, 31, 2473-2483 (2024) 

17. Parameter determination of anisotropic yield function using neural network-based indentation plastometry

K. Jeong, K. Lee, D. Kwon, M.-G. Lee*, H. N. Han*

International Journal of Mechanical Sciences, 263, 108776 (2024)

16. Development of functionally graded austenitic lightweight steel through electrically assisted pressure solid-state joining

S. Lee, J. Moon, H. Kim, Y. H. Cho, H. H. Lee, H. Choi, Y. Kim, D.-W. Suh, K. Jeong*, H. N. Han*

Materials Science and Engineering A, 891, 146003 (2024)

15. Bimodal structured chromium-tungsten composite as plasma-facing materials: Sinterability, mechanical properties, and deuterium retention assessment

N. Kwak1, S.-G. Kang1, G. Min, R. Arredondo, K. Jeong, H. Kim, T. Schwarz-Selinger, M. Balden, A. Manhard, J.-H. You*, H. N. Han*

Acta Materialia, 262, 119453 (2024)

14. Improving thermal conductivity of reduced-activation ferritic/martensitic steel using three-dimensional woven copper fiber

Y. H. Cho, H. J. Yang, K. Jeong, C.-H. Lee, S.-J. Hong, W.-R. Yu, H. N. Han*

Fusion Engineering and Design, 197, 114079 (2023)

13. New approach to hole-expansion ratio in complex phase and martensitic steels: Understanding the role of punching damage

W. Cho1, B.-S. Jeong1, K. Jeong, S.-H. Lee, H. Kim, J. Lee, S.-I. Kim, H. N. Han*

Journal of Materials Research and Technology, 26, 837-849 (2023)

12. A Kinetic Indicator of Ultrafast Nickel-Rich Layered Oxide Cathodes

J. Wang1,*, H. Hyun1, S. Seo1, K. Jeong, J. Han, S. Jo, H. Kim, B. Koo, D. Eum, J. Kim, J. Chung, H.-H. Cho, H. N. Han, T. J. Shin, M. Ni, K. Kang*, J. Lim*

ACS Energy Letters, 8, 2986-2995 (2023)

11. Deep learning-based indentation plastometry in anisotropic materials

K. Jeong, K. Lee, S. Lee, S.-G. Kang, J. Jung, H. Lee, N. Kwak, D. Kwon, H. N. Han*

International Journal of Plasticity, 157, 103403 (2022)

10. Athermally enhanced recrystallization kinetics of ultra-low carbon steel via electric current treatment

K. Jeong1, S.-W. Jin1, S.-G. Kang, J.-W. Park, H.-J. Jeong, S.-T. Hong, S. H. Cho, M.-J. Kim*, H. N. Han*

Acta Materialia, 232, 117925 (2022)

9. Athermal glass work at nanoscale: Engineered electron beam induced visco-plasticity for mechanical shaping of brittle amorphous silica

S.-G. Kang, K. Jeong, J. Paeng, J.-P. Ahn, S. Boles, H. N. Han*, I.-S. Choi*

Acta Materialia, 238, 118203 (2022)

8. Suppressing High-Current-Induced Phase Separation in Ni-Rich Layered Oxides by Electrochemically Manipulating Dynamic Lithium Distribution

H. Hyun, K. Jeong, H. Hong, S. Seo, B. Koo, D. Lee, S. Choi, S. Jo, K. Jung, H.-H. Cho, H. N. Han, T. J. Shin*, J. Lim*

Advanced Materials, 33, 2105337 (2021)

7. Prediction of precipitation kinetics and strengthening in FeMnAlC lightweight steels

J. Lee1, H. Kim1, K. Jeong, S.-J. Park, J. Moon, S.-G. Kang*, H. N. Han*

Journal of Materials Research and Technology, 14, 2897-2908 (2021)

6. Prediction of uniaxial tensile flow using finite element-based indentation and optimized artificial neural networks

K. Jeong, H. Lee, O. M. Kwon, J. Jung, D. Kwon, H. N. Han*

Materials & Design, 196, 109104 (2020)

5. A fully coupled diffusional-mechanical finite element modeling for tin oxide-coated copper anode system in lithium-ion batteries

K. Jeong1, H.-H. Cho1, H. N. Han*, D. C. Dunand*

Computational Materials Science, 172, 109343 (2020)

4. Integrated porous cobalt oxide/cobalt anode with micro- and nano-pores for lithium ion battery

H. Park, K. Kim, K. Jeong, J. S. Kang, H.-H. Cho, B. Thirumalraj, Y.-E. Sung, H. N. Han, J.-H. Kim, D. C. Dunand, H. Cho*

Applied Surface Science, 525, 146592 (2020)

3. Microstructures and mechanical properties of austenitic light-weight steels, and prediction of property distribution in large-scale slab

T.-H. Kim, Y.-S. Choi, K.-W. Kim, S.-J. Park, J. Y. Park, K. Jeong, H. N. Han, J.-H. Shin*

Korean Journal of Metals and Materials, 58, 830-842 (2020)

2. Effect of Pulsed Electric Current on TRIP-Aided Steel

H.-J. Jeong, J.-W. Park, K. Jeong, N. M. Hwang, S.-T. Hong, H. N. Han*

International Journal of Precision Engineering and Manufacturing-Green Technology, 6, 315-327 (2019)

1. Effect of Cooling Rate on the Microstructure and Mechanical Properties of Fe-Mn-Al-C Light-Weight Steels

J. Y. Park, S.-J. Park, J.-H. Lee, J. Moon, T.-H. Lee, K. Jeong, H. N. Han, J.-H. Shin*

Korean Journal of Metals and Materials, 55, 825-835 (2017)