How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 6 min read · Independent comparison
• Kinboofi KZ ZS10 — biggest strength: a hybrid 4BA + 1DD driver setup with a 10mm dynamic driver, 30 ohm impedance and a 40,000 Hz frequency range, plus a detachable 0.75mm 6N OFC 2-pin cable and a 304 stainless steel shell.
• Kinboofi KZ ZS10 — biggest trade-off: it is wired only, with a 3.5mm jack, no microphone in this variant, and no active noise cancellation — just passive sound isolation.
• Picun V1 — biggest strength: a rated 15ms low-latency mode over 2.4GHz plus Bluetooth 5.4, dual 10mm dynamic drivers, an active noise cancelling mic, IPX4 sweat resistance and a charging case.
• Picun V1 — biggest trade-off: it has no 3.5mm jack at all, so it lives and dies by its dongle and Bluetooth connection, and its 20 Hz–20,000 Hz range is narrower than the KZ's.
• Pick Kinboofi KZ ZS10 if you want a wired monitor for critical listening, singing, streaming or latency-free analog audio.
• Pick Picun V1 if you want a wireless gaming earbud with a dongle for PC, PS5, PS4, Switch or VR.
The KZ ZS10 is built around a hybrid driver array: four balanced armatures plus one 10mm dynamic driver, rated at 30 ohm impedance, 111 dB sensitivity and a frequency response stretching to 40,000 Hz. In plain terms, that's a design meant to separate the frequency bands so vocals, instruments and low-end each get their own dedicated driver instead of one speaker trying to do everything. The purple stainless steel shell with a resin structure is the other half of the story — 304 stainless steel is a durable, rigid material, and the rounded in-ear shape is designed to sit inside the ear canal for passive sound isolation rather than active cancellation.
Who should buy it: someone who wants a wired in-ear monitor for singing, monitoring, editing, or just listening on a phone or laptop with a headphone jack. The "Video Game" theme in the listing suggests gaming, and there's real merit to that — a wired analog connection has no wireless transmission latency to manage at all. Who should skip it: anyone who wants wireless freedom, a built-in mic for voice chat, sweat resistance for workouts, or active noise cancellation. This is a wired monitor first and foremost.
Picun V1: Who It's For
The Picun V1 is the opposite philosophy. It's a fully wireless earbud built specifically around gaming, and the headline number is a rated 15ms audio latency using 2.4GHz wireless technology, with Bluetooth 5.4 as the second connection path. The 2.4GHz dongle is the important part: it plugs into a PC, PS4, PS5, Switch or VR headset and gives the earbuds a dedicated low-latency link rather than relying on standard Bluetooth audio, which is where most wireless gaming lag complaints come from.
Audio is handled by dual 10mm dynamic EQ drivers producing what the listing calls 3D stereo surround sound, with a 20 Hz–20,000 Hz range. The pitch is spatial awareness — hearing footsteps and gunshots directionally. There's an active noise cancelling microphone for team communication, IPX4 sweat resistance, and an ergonomic seal that physically blocks outside noise. Controls are remote-based media controls, and the box includes the smart charge case, a USB-C Bluetooth dongle, a USB-C to USB-A adapter, a charging cable, both earbuds and three sizes of ear caps.
Battery is worth spelling out: 6 hours on a single charge in music mode, 20 hours average life with the carrying case (the case itself is also rated 20 hours), and a full charge in about an hour. Mic use shortens runtime. A voice prompt warns you below 5% battery. Setup on Windows requires manually setting "picun V1" as the input and output device the first time.
Side-by-Side: Which Should You Choose?
• Best for lowest latency → Picun V1, thanks to its rated 15ms 2.4GHz dongle mode; the KZ ZS10 avoids the issue entirely by being wired.
• Best for pure audio hardware → Kinboofi KZ ZS10, with five drivers (4BA + 1DD) versus the V1's dual dynamic drivers.
• Best for console gaming → Picun V1, which lists PC, PS4, PS5, Switch and VR compatibility through the dongle.
• Best for battery life → Picun V1, at 6 hours per charge and 20 hours with the case; the KZ ZS10 draws power from your device over the 3.5mm jack.
• Best for durability and repairability → Kinboofi KZ ZS10, with its 304 stainless steel shell and detachable 2-pin cable.
• Best for voice chat → Picun V1, which has an active noise cancelling mic; this KZ variant ships with no microphone.
• Best for workouts → Picun V1, rated IPX4 sweat resistant; the KZ ZS10 lists no water or sweat rating.
• Best for wired, zero-setup listening → Kinboofi KZ ZS10, which just plugs into a 3.5mm jack.
In my opinion, the Picun V1 is the pick for most people shopping under the "low latency gaming earbuds" label, because it's the one actually engineered around the problem — a 2.4GHz dongle, a rated 15ms latency figure, a mic, IPX4 and a charging case. I'd choose the Kinboofi KZ ZS10 instead if my priority is wired sound quality, a repairable cable and a metal shell, and I don't need wireless or a microphone at all. Decide which of those two you are before you buy. Check the current price on Amazon for whichever one fits.
FAQ
Lower milliseconds is better, and a dedicated 2.4GHz dongle generally beats ordinary Bluetooth audio for responsiveness. The Picun V1 lists 15ms over 2.4GHz plus Bluetooth 5.4; the Kinboofi KZ ZS10 is wired through a 3.5mm jack, so it has no wireless transmission delay to report.
It's a mode that prioritizes fast audio transmission over other connection features, usually to keep sound synced with on-screen action. The Picun V1's approach is hardware-based: the included USB-C dongle establishes a 2.4GHz link with your PC, PS5, PS4, Switch or VR headset.
For the rated 15ms figure, yes — the 2.4GHz dongle is what delivers it. Bluetooth 5.4 is also supported for normal wireless listening, but the dongle is the gaming path, and on Windows you'll need to set "picun V1" as your input and output device the first time.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: MAIRDI Telephone Headset vs MZYML Active Noise Cancelling, Joythink Kids vs Boodlab Kids Headphones Headband, Jam Audio Earbuds Secure Ear-hook vs BEVCEFCC 5.4, Boodlab 3D vs Generic Sleep Masque Headphones