How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-30 · 6 min read · Independent comparison
• Kinboofi KZ ZES IEM — biggest strength: an electrostatic-plus-dynamic hybrid setup in a sealed metal housing, plus a 0.75 mm 2-pin detachable cable that accepts most aftermarket 2-pin 3.5 mm cables.
• Kinboofi KZ ZES IEM — biggest trade-off: it's the heavier, more specialized pick (listed at 80 g), and the package is a fairly basic set — one cable, three pairs of silicone tips, a manual.
• Bawjog KZ EDC Pro — biggest strength: a 20–40000 Hz dynamic driver tuned for deep, precise bass, wrapped in a lightweight resin shell with an inline HD mic and one-key media control.
• Bawjog KZ EDC Pro — biggest trade-off: the stock cable is silver-plated but not specified as broadly swappable, and the shell's resin finish rewards a little care over time.
• Buy the Kinboofi KZ ZES IEM if you care most about isolation, hybrid-driver detail and cable upgrades; buy the Bawjog KZ EDC Pro if you want a comfortable, mic-equipped everyday monitor for gaming and voice chat.
The KZ ZES is built around two ideas: sealing and driver flexibility. The housing is designed to sit deep and generate a good seal, and the spec sheet lists noise control as sound isolation rather than any active circuitry. That matters for the "noise isolating gaming headphones" angle — passive isolation is exactly what a wired in-ear does well, and a deep, well-sealed fit is the whole mechanism. There's no battery, no charging case, no pairing routine. Plug the 3.5 mm jack in and you're done.
Under the hood it's a hybrid: an electrostatic driver paired with a dynamic driver, rated at 24Ω (32Ω in the product information field), 112 dB/mW sensitivity and a 10–20000 Hz range. High sensitivity plus low impedance is the classic recipe for something a phone, controller or laptop headphone jack can drive without a separate amp. The 1.25 m cable with 0.75 mm gold-plated 2-pin connectors is detachable, and the brand states compatibility with the majority of 2-pin upgrade cables on the market — so if a cable frays or you want a different length or a boom-mic cable, you swap the cable instead of the earphones.
Bawjog KZ EDC Pro: Who It's For
The EDC Pro takes the opposite approach. Its headline claim is bass handling: the listing describes exceptional dynamic response, deep and powerful rhythm, and bass that stays precise and full across the range. The numbers back the tuning intent — 20–40000 Hz, 23.5Ω impedance, 108 dB sensitivity. That extended low end and the wide frequency window point to a dynamic driver tuned for a warm, full-bodied signature rather than a flat studio reference. For games, that usually translates to footstep thumps, explosions and engine rumble carrying real weight.
Comfort is clearly the design priority. The shell is small and lightweight, molded from skin-friendly imported resin with UV varnish for a glossy finish, and the brand says the shape is based on ear-data research. Silicone tips are included and the listing credits them with effective noise isolation for fatigue-free long sessions. In practice, resin shells like this tend to sit lighter in the ear than metal housings, which is a real advantage over a three-hour ranked session.
The mic is the other differentiator. There's a built-in HD microphone for hands-free calls, online meetings and gaming chat, plus one-key control to answer, end or skip. The cable is oxygen-free copper with silver plating, a 0.75 mm 2-pin detachable design, 120±5 cm long. Buy it if you want one wired in-ear that doubles as a headset for Discord, Zoom and phone calls, and if you like a bass-forward, comfortable monitor. Skip it if you want the widest possible aftermarket-cable ecosystem or you specifically want hybrid-driver detail — this is a single dynamic driver.
• Best for maximum passive isolation → Kinboofi KZ ZES IEM: the metal housing is explicitly designed to seal and block ambient noise.
• Best for bass weight and warmth → Bawjog KZ EDC Pro: a dynamic driver tuned for deep, precise low end across a 20–40000 Hz range.
• Best for long, fatigue-free sessions → Bawjog KZ EDC Pro: small, lightweight resin shell with skin-friendly silicone tips.
• Best for cable upgrades and repairs → Kinboofi KZ ZES IEM: 0.75 mm 2-pin connectors stated as compatible with most 2-pin 3.5 mm cables.
• Best for voice chat and calls → Bawjog KZ EDC Pro: built-in HD mic with one-key answer/end/skip control.
• Best for hybrid-driver detail → Kinboofi KZ ZES IEM: electrostatic plus dynamic drivers in one shell.
• Best for easy driving from a controller or phone → either: the ZES at 112 dB/mW and the EDC Pro at 108 dB both pair with a plain 3.5 mm jack.
• Best for a lighter carry → Bawjog KZ EDC Pro: resin construction versus the ZES's 80 g listed weight.
In my opinion, the Bawjog KZ EDC Pro is the better default for most people shopping this exact use case. Gaming is long-session work, and the lightweight resin shell, comfortable silicone tips, bass-forward tuning and built-in mic cover the whole job — game audio in, voice chat out — with one cable. I'd pick the Kinboofi KZ ZES IEM instead if your priority is shutting out a loud room, if you want hybrid-driver detail, or if you already own 2-pin cables you'd rather reuse. Both are wired, both isolate passively, and neither hides a battery or a companion app. Check the current price on Amazon before you commit, since that's the one number that should decide the tie.
what is noise isolation headphones
Noise isolation means the earphone physically blocks outside sound by sealing your ear canal — through the housing shape and the ear tips — rather than cancelling it electronically. Both the KZ ZES and the EDC Pro list sound isolation as their noise control method, so both work this way.
are noise cancelling headphones good for gaming
Active noise cancelling targets steady low-frequency drone like engines; it can add latency and needs power. For gaming, passive isolation is often the simpler route, and both of these wired in-ears isolate without a battery, so there's nothing to charge mid-session.
what are the best noise cancelling gaming headphones
For a wired, isolating setup, my picks here are the Kinboofi KZ ZES IEM for sealing and hybrid-driver detail, and the Bawjog KZ EDC Pro for lightweight comfort, bass and an inline mic. Which is "best" depends on whether you value isolation or all-day comfort more.
are there noise cancelling gaming headphones
Strictly speaking, these two isolate rather than cancel. If you specifically need active cancellation, look for a powered headset; if you just want the room quieted for gaming, either the KZ ZES or the EDC Pro will do it passively over a 3.5 mm connection.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Wmcaps Beanie vs Generic Under Pillow Speaker, Sony ZX Series vs HamiltonBuhl Motiv8: Headphones with Mic, Pizen Senfer PT2021 vs Yealink BH76, Wyze Lifestyle Noise Cancelling vs TRON Hybrid Active Noise