How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-20 · 7 min read · Independent comparison
• khanka Hard Case — biggest strength: A molded hard EVA shell with a soft interior lining and a custom cutout that holds folded Audio-Technica ATH-M50X, M40X, M30x, M20X and M50xBT2 models firmly in place.
• khanka Hard Case — biggest trade-off: It is a case only. No headphones, no cables, no accessories are included, so it is useless to anyone who doesn't already own a compatible pair.
• BietrunPro Xlr Usb Dynamic — biggest strength: Dual XLR and USB-C output in one microphone, plus a 3.5mm monitoring jack, gain knob, metal desk stand and pop filter — a full setup out of one box.
• BietrunPro Xlr Usb Dynamic — biggest trade-off: It is a wired, corded-electric microphone. There is no battery and no wireless mode, so you are tethered to your interface, mixer or computer at all times.
• Who the khanka is for: Someone who already owns Audio-Technica studio headphones and wants them protected instead of rattling around loose in a bag.
• Who the BietrunPro is for: Someone starting a podcast, streaming channel, voice-over setup or home recording rig who needs a mic that works with both pro gear and a plain laptop.
The khanka case is a single-purpose product, and it's honest about that. It's a hard EVA shell measuring 7.5 x 6.7 x 4.3 inches, weighing around 200 grams, with a rubber carry handle, a smooth zipper, and an interior mesh pocket for charging cords. The inside is lined with soft fabric so the shell absorbs bumps and vibration while the lining keeps the finish of your headphones from getting scratched. It's rated waterproof, dust resistant and scratch resistant, and the whole thing is molded to a custom fit rather than being a generic pouch.
What that custom fit actually means in daily use: the case is shaped around the folded position of the ATH-M50X and its siblings, so the headphones sit still instead of sliding around. That matters if you commute, toss a bag in a car trunk, or work gigs where gear gets stacked and shifted. The listed compatible models are the ATH-M50, M40X, M50X, M30x, M50xMG and the wireless M50xBT2, so if you own one of those, the fit is the entire point.
Who should skip it? Anyone who doesn't own those headphones, and anyone expecting the case to come with anything else. The listing is for the protective case only — no headphones, no cords, no accessories. It's also not a good pick if you want a soft, collapsible bag you can stuff into a tight pocket; this is a rigid box with a fixed shape. In my opinion, this is the right buy for someone who treats their M50X as a long-term purchase and wants it to stay in one piece for years. If that's not you, the case has nothing to offer.
The BietrunPro is the opposite kind of product: it's a kit, and it's trying to be the only thing you need to start recording. The microphone itself uses a unidirectional dynamic capsule with a 40Hz–20kHz frequency response, -51 ±3dB sensitivity, a 92dB signal-to-noise ratio and 600-ohm impedance. Dynamic capsules with a unidirectional pattern are the practical choice for untreated rooms — they're most sensitive to sound arriving from the front and reject more of what comes from the sides and rear, which is exactly what you want in a bedroom or a noisy home office.
The connectivity is where it earns its name. You get XLR output for audio interfaces, mixers and sound cards using the included 16.5 ft XLR cable, and USB-C output for desktops, laptops, MacBooks and OTG-enabled Android phones using the included USB-A-to-C or C-to-C cables. No drivers. That dual path means the same microphone can sit on a proper interface today and plug straight into a laptop tomorrow without buying anything else.
Then there's the stuff that usually costs extra: a gain knob at the bottom of the mic that adjusts both microphone and headphone level, a 3.5mm headphone jack for zero-latency monitoring so you hear what your audience hears, an all-metal desk stand adjustable from 8.5 to 16 inches with a 180° tilt range, a detachable double-layer pop filter, and a mic clip with a 1/4-inch screw port so you can move it to a boom arm or floor stand later.
Side-by-Side: Which Should You Choose?
• Best for protecting existing headphones → khanka Hard Case. The custom molded interior is built around specific Audio-Technica models, not a one-size pouch.
• Best for starting to record → BietrunPro Xlr Usb Dynamic. Mic, stand, XLR cable, USB cables and pop filter all arrive together.
• Best for travel and commuting → khanka Hard Case. The rubber handle, slim rigid box and cord pocket are made for moving gear between home, office and gigs.
• Best for connecting to a mixer or audio interface → BietrunPro. The 16.5 ft XLR cable and XLR output are the pro-audio path.
• Best for plug-and-play on a laptop or Android phone → BietrunPro. USB-C with no drivers required is the fastest route to a recording.
• Best for a quiet, controlled recording space → BietrunPro. The unidirectional dynamic capsule plus the dual-layer pop filter are aimed at clean vocals in imperfect rooms.
• Best if you own nothing yet → BietrunPro. Buying the case first makes no sense; it protects headphones you don't have.
• Best if you already own Audio-Technica ATH-M50X, M40X, M30x, M20X or M50xBT2 → khanka Hard Case. That's the exact compatibility list.
If I had to pick one, I'd buy the BietrunPro Xlr Usb Dynamic — because it does something on its own, where the khanka case only protects something else you already paid for. In my opinion, the BietrunPro is the more useful purchase for most people reading a comparison like this: dual XLR and USB-C output, real-time monitoring, a gain knob, and a stand and pop filter in the box is a genuinely complete starting point. The khanka is a good case, and if you own a compatible pair of Audio-Technica headphones, it's the smarter buy of the two. It just isn't a product you can use by itself. Check the current price on Amazon for whichever one matches your setup before you commit.
FAQ
Yes. It has a USB-C output mode that connects directly to desktops, laptops, MacBooks and OTG-enabled Android phones with no drivers. The XLR output is there if you later add an interface or mixer.
The BietrunPro, clearly. It's a microphone with a unidirectional dynamic capsule, a 92dB signal-to-noise ratio, a 3.5mm monitoring jack and a pop filter. The khanka is a storage case and has no audio function at all.
No. It's corded electric, powered through its XLR or USB-C connection, so there's no battery to charge and no wireless mode to fall back on.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.