Kens 2011 colloidal / ionic silver generator.
I designed a colloidal/ionic silver generator that incorporated menu selectable programs, the device had many advanced features; only one was ever made for personal use.
Some of the features were:
Electronic electrode polarity reversal could be enabled during operation.
Programmable by those skilled in the art of microprocessor programming.
Menu driven with rotary encoder.
Secret menu driven calibration.
Could be programmed to display joules, siemens, ohms, time, micrograms, coulombs etc.
Auto cut off by time, amount of silver, coulombs, water resistance (ohms) or conductivity (siemens).
Main Disadvantages:
There was too much time involved wiring it up.
Holes had to be drilled through the case to hold the circuit board and LCD display.
BTW the above problems could have been solved with a redraw of the main circuit board.
The silver electrode holder was remote from the device so a plug and wires were used.
The menu was scary for some operators, too many choices!
Disclaimer
Although I will endeavour to keep all information accurate mistakes will be made. No claims of safety are made and all use of this information is at the risk of the user/builder. Please use the spice simulation and component data sheets to test component dissipation and other important parameters prior to building. Remember current kills and voltage drives the current !
I have no formal association with Linear Technology or any other companies mentioned on this web site.