Everything to Know about Auger Tube Forgings

What are Common Auger Sizes?

Augers come in pretty much any size you can think of. Ranging in size from a small portable devices to those that require to be trailed behind a tractor.

The following dimensions are typically offered for auger drill bit sizes:

• 4 inches

• 6 inches

• 8 inches

• 12 inches

• 18 inches

The typical depths for an auger are 3 and 4 feet, however, there are augers out there that let you dig deeper and wider in terms of handholds and connection.

One-man augers should not be used to drill holes larger than 8 inches in diameter. Whereas two-man augers are effective up to a diameter of 18 inches. A crane-attached or tow-behind type is necessary for any project involving holes that are bigger and deeper than those mentioned above.

What are Augers Most Commonly Used For?

The main use of augers is to drill holes. For example, some of the more common industrial applications are drilling holes for solar posts, telephone poles, and deck posts.

Augers facilitate greater workflow and continuity by saving time and effort. As a result, this tool will be most useful when you need to dig several holes of the same dimension for a single job.

While augers often excel in these more industrial-focused applications, there are other uses as well, including:

• Drilling to obtain maple syrup from trees or into wood (this would require a wood auger)

• Gardening are simple home project (this would require a handheld auger)

• ice-fishing while drilling holes in it (gas and hand-powered augers will work for this purpose)

Why Buy an Auger?

Augers are highly flexible and may save you many hours of physically taxing effort on projects that would otherwise require digging a substantial hole along with the auger tube forgings.

Augers are primarily utilized in business to increase productivity on industrial projects or building sites. A fence may be built, vegetables can be planted, ice fishing can be done, or even maple syrup can be extracted with an auger.

Common Types of Augers

Earth Auger

The construction of an earth auger consists of a revolving metal pipe or rod with one or more blades connected at the lower end. An earth auger is made to cut or scrape through the dirt and soil, as the name would imply. When planting crops, farmers and gardeners frequently utilize these augers.

Ice Auger

Ice augers may be used for a number of different tasks, including smashing ice and drilling holes in it. This tool's blades are curved, honed, and built specifically for cutting and smashing ice. They are frequently employed in commercial or industrial food equipment to shatter ice for food and beverages. Ice augers may be used whenever you need to drill through thick ice covering, not just for ice fishing.

Grain Auger

A grain auger's main function is to move a lot of grain. A grain auger is composed of a sizable tube with a solid shaft with flighting whirling counterclockwise around it.

Bottom Line

The Federal Group USA has you covered if you're seeking a metal fabrication business that can create high-quality bespoke auger drills, auger studs, and other auger components with the basic auger tube forgings. The Federal Group USA has more than 40 years of experience in the metal fabrication sector and can create bespoke auger drills for practically any industry or application. Visit KDK Forging Co.