Summer 2023
AMRL lab PI Kazi Billah and member Neel Rathod presented their research at the Oak Ridge National Laboratory's Summer Fellowship (and internship) Program, August 2023.
AMRL lab PI Kazi Billah and member Neel Rathod presented their research at the Oak Ridge National Laboratory's Summer Fellowship (and internship) Program, August 2023.
AMRL lab members Mario and Richard presented their research at 34th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, held in Austin TX on August, 2023
AMRL lab PI Kazi Billah and MENG Colleague Dr. Hamidi participated in the RockON Fellowship program at the NASA Wallop Flight Test Facility in Virginia, May 2023
Congratulations to the UHCL's Team Funkonauts, on your selection, advancing to Phase II of the 2023 Microgravity Neutral Buoyancy Experiment Design Teams (Micro-g NExT) challenge.
AMRL lab presented two conference papers at the ASME IMECE Conference at Colombus, OH, October 2022
Kazi presented his first conference paper at 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, held in Austin TX on August 13-15, 2018
Kazi started his PhD in Mechanical Engineering at UTEP.
Kazi successfully defended his thesis on "Characterization of Electrically Conductive Inks in Simulated Space Environment ". Congratulations!
Salvatore T. " Tory" Bruno, CEO and President of United Launch Alliance, and President Diana Natalicio, center, stand with the winning CubeSat Team. The UTEP project, Orbital Factory II (OF2), will be on board the Atlas V rocket and placed into an elliptical orbit approximately 26,000 miles above Earth's center. Bruno gifted a model of the 22-story high Atlas V to Natalicio. Source: http://engineering.utep.edu/announcement022017_2.htm
UTEP CubeSat team won the first position CubeCorp competition at United Launch Alliance. For the remarkable work of 3D printing in space, the entire team was recognized by House of Representative at Capitol Hill Austin.
Media coverage on CubeCorp Competition: https://elpasoheraldpost.com/utep-high-school-students-win-united-launch-alliance-cubesat-competition/
UTEP CubeSat team won the first position CubeCorp competition at United Launch Alliance. For the remarkable work of 3D printing in space, the entire team was recognized by House of Representative at Capitol Hill Austin.
Media coverage on CubeCorp Competition: https://elpasoheraldpost.com/utep-high-school-students-win-united-launch-alliance-cubesat-competition/
Kazi transferred his admission to Mechanical Engineering Department at the University of Texas at EL Paso. He started to work in CubeSat project that is led by joint effort of NASA MIRO Center of Space Exploration and Technology Research (cSETR) and W. M. Keck Center for 3D Innovation.
3D printed CubeSat and Aluminum alloy frame.
Payload demonstration of a CubeSat. This payload consist of a 3D printed that would enable the 3D printing in space environment.
Kazi started his Master of Science in Computational Science in the University of Texas at EL Paso.
Congratulation on new job Kazi! He will be working as a Lecturer in the Department of Textile Engineering at World University of Bangladesh.
Kazi completed his Bachelor of Science in Mechanical Engineering from Khulna University of Engineering & Technology (KUET). Congratulations to all new born engineer!