How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a low-profile, single-purpose under-desk hook that treats your headphones like the delicate thing they are, choose Kanto HH Universal Under; if you need a two-pack of foldable wall mounts that can hold a controller and a headset side by side, choose playvital FOLD Controller Holder. That is the whole decision in one line, and the rest of this comparison is me showing you why I land there.
• Kanto HH Universal Under — biggest strength: A contoured silicone cradle on a solid steel body that holds most on-ear and over-ear headphones up to two pounds, mounted under the desk with 3M VHB adhesive or the two included self-tapping screws.
• Kanto HH Universal Under — biggest trade-off: It is a dedicated headphone hook. It will not hold a controller, it mounts under a surface rather than on a wall, and the two-pound ceiling rules out unusually heavy cans.
• playvital FOLD Controller Holder — biggest strength: Two foldable wall mounts in one pack, each rated to 2 kg, with a damped hinge that folds to 11.5 mm flat and opens to 88°, plus anti-slip twill lines to stop gear sliding off.
• playvital FOLD Controller Holder — biggest trade-off: It is a wall mount made of ABS plastic, so it stands off your wall rather than tucking invisibly under a desk, and the fold-out arm is a bulkier look than a flush hook.
• Who each pick is for: Kanto for the desk worker who wants headphones out of sight but within arm's reach; playvital for the gamer who wants a controller and a headset parked on the wall, two of them, on a budget.
The HH is a small object with a clear job. It is a steel hook with a silicone cradle, sold as a universal hanger for on-ear and over-ear headphones, and it mounts to the underside of your desk rather than to a wall. The curved, contoured edges of that silicone cradle are the point: they hold the headband securely while the soft material keeps it from getting chewed up by a hard edge. If you have ever hung a nice pair of headphones on a bare metal hook and watched the padding flatten, you understand why that detail matters.
Installation gives you two paths, and they suit different people. There is a high-strength 3M VHB adhesive pad for a quick, tool-free job — good if you rent, or if you are not thrilled about putting holes in a desk you might sell. There are also two self-tapping screws in the box for a more permanent setup, which is what I would use on a solid wood or laminate desk I plan to keep. The whole thing is low-profile: roughly 4.17 x 1.57 x 1.42 inches and light enough (about 0.14 kg) that the adhesive is not fighting much weight. It is rated for headphones up to 2 pounds, which covers the overwhelming majority of on-ear and over-ear models, but not the heaviest planars.
Buy it if your problem is desktop clutter and you want your headphones gone from the surface but still reachable without standing up. It is the tidy, minimal-desk move, and it matches the rest of Kanto's desktop accessories in that regard. Skip it if you want one mount to serve both a controller and a headset, if you need a wall solution, or if your headphones tip past that two-pound limit. This is a headphones-only tool, and it is honest about that.
The playvital FOLD is the opposite philosophy: instead of hiding one item under a desk, it puts two items on display, on your wall, and folds them flat when you are not using them. You get a 2-pack, so out of one box you can park a controller and a headset, or two controllers, or two headsets — your call. Compatibility is deliberately broad: most modern game controllers, third-party controllers, and headsets, which is why the "universal" label actually holds up here. PS5, PS4, Xbox, Switch 2 Pro and similar pads are the intended targets.
The folding mechanism is the feature I keep coming back to. The arm has a damped feel, folds to just 11.5 mm thick against the wall, and opens to a maximum angle of 88°. That means when the mount is empty it nearly disappears; when it is loaded, the arm sits out at a usable angle so the controller or headset rests naturally instead of dangling awkwardly. The surface uses long twill anti-slip lines, which grip the item and cut down on the wobble that eventually shakes a controller onto the floor. It is made of ABS plastic with a 2 kg maximum load, and each mount weighs only about 18 g. Dimensions are roughly 3.94 x 1.97 x 0.59 inches, finished in New Hope Gray.
Mounting mirrors the Kanto approach: strong adhesive or screws, your choice. The trade-off is aesthetic and spatial. This lives on your wall, it is plastic, and the folded arm is still a visible fixture — it is not the invisible-under-the-desk trick the Kanto pulls. Buy it if you want a tidy gaming corner with your pad and headset off the floor and off the desk, if you like the idea of two mounts for the price of one purchase, or if you move your setup around and want something you can fold away. Skip it if you are strictly a desk worker with no wall space, or if you want a flush, furniture-grade metal hook.
• Best for headphones only → Kanto HH Universal Under. Silicone cradle, contoured edges, built specifically to protect a headband.
• Best for controller plus headset → playvital FOLD Controller Holder. It is designed for both, and you get two mounts in the pack.
• Best for hiding gear completely → Kanto HH Universal Under. Mounted under the desk, it is out of sight and keeps your desktop clear.
• Best for small rooms and wall setups → playvital FOLD Controller Holder. Folds to 11.5 mm and opens to 88°, so it takes minimal space when idle.
• Best weight capacity → playvital FOLD Controller Holder. A 2 kg (roughly 4.4 lb) rating per mount versus the Kanto's 2 lb headphone limit.
• Best for delicate headbands → Kanto HH Universal Under. Anti-slip silicone with contoured edges beats a plastic arm for protecting padding.
• Best for grip while loaded → playvital FOLD Controller Holder. The long twill anti-slip lines are there to stop shaking and accidental drop-offs.
• Best for mounting flexibility → both. Each ships with adhesive and screws, so neither locks you into one installation method.
• Best for a two-item setup in one box → playvital FOLD Controller Holder. Two mounts, one purchase; the Kanto is a single hook.
In my opinion, most people reading this should buy the Kanto HH Universal Under. If your actual problem is that headphones are cluttering your desk, it solves that problem more elegantly than anything wall-mounted can: solid steel, a silicone cradle that protects the headband, adhesive or screws in the box, and a low profile that disappears under the desk. I would only steer you to the playvital FOLD Controller Holder if you specifically need to hold a controller and a headset, want two mounts, or have no desk underside to work with. Pick based on what is sitting on your desk right now — headphones alone, or headphones plus a pad. Check the current price on Amazon before you commit, since that is the one variable I will not guess at.
what is universal headphones
Universal headphones are models designed to work across devices rather than being locked to one brand or console — typically anything with a standard 3.5 mm connection or a common wireless standard. The "universal" label is mostly about fit and compatibility, which is exactly why accessory mounts like these two advertise broad headphone support rather than naming one model.
are headphones universal
are gaming headphones universal
Often, but not always. The playvital FOLD is built around most modern game controllers and headsets, including third-party pads, which is a broad claim rather than a universal one. If your headset is unusually wide or heavy, the Kanto HH's contoured silicone cradle and 2 lb limit may actually be the safer fit for the headband itself.
Should I mount these with adhesive or screws?
Both products give you the choice, and both include what you need — the Kanto HH ships with a 3M VHB adhesive pad plus two self-tapping screws, and the playvital FOLD offers adhesive or screws as well. I would use adhesive on a surface I do not want to puncture and screws on anything permanent, especially where the mount will carry a controller regularly.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: FUHAYA 2 vs NANSLS Earbuds: Bluetooth Headphones for Remote, Wisoqu Ear Cushions vs Fockety Ear Pads Cushions, Dytole Headset vs WESEARY Gaming Headset, commountain 3.5mm vs XIEXIECARE 12pcs: Ear Pieces