Terrco - KS-5048 - $2000

Terrco - KS-5048 - Nice Carving Machine. Many uses for trade or hobbies : furniture & manufacturing, Wood duck/decoy carving, guitar making, gunstock carving... See below for video and PDF Manual.

From Website:

Designed for the small business owner who needs accuracy of the larger machines plus production capability. This rugged two spindle carver is used for gunstocks, decoys and plaques. This machine is capable of relief carving and between centers work.

-------

The K-STAR Carver is a two spindle table top mount, manual carving machine, that makes two copies of a pattern per run.

Can carve up to 10" in diameter (360°) or a 10" width in flat backed (relief) carvings. The standard carving lengths up to 48"

Powered by a 1/2 HP industrial electric motor, turning the spindles at 11,000 RPM through a belt and pulley system. This motor provides the power and durability needed for tough carving applications. The electricity needed is a standard wall outlet, as the motor runs on 115 volt, 60 HZ, 1 phase and draws only 6 amps.

The twin spindles are counter rotating to eliminate the side thrust forces generated by the cutters. This feature makes the K-STAR easy to use and smooth through the cutting operation. These spindles are mounted on sealed high speed spindle bearings for long life and zero maintenance.

The K-STAR carving machine is built for many years of hard use with a minimum of maintenance. The frame is precisely built from heavy wall steel tubing and welded into one rigid unit. The carriage is built of several heavy casted parts to insure durability, but the sliding weight balance system allows the user a light touch and easy to operate feel. All the maintenance required is to clean the rails and carriage wheels regularly and grease pivot bearings, worm and worm gears occasionally.

The pattern and work blanks are held in place by driving spur heads in the stationary front beam and a dead center in the sliding rear beam. A worm and worm gear system attached to the front beam allows the pattern and work blanks to turn in unison with a crank on the left side of the machine. This system allows the carver to get to within .015 of an inch when the machine is properly leveled and bits are sharp.

The K-STAR's ease of use, rugged construction, and economical price, make it the right choice for the small business owner or serious hobbyist. Whether you produce furniture parts, gunstocks or decoys, the K-STAR is the right choice for you.