How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-08 · 7 min read · Independent comparison
• JLab Go Air Pop+ — biggest strength: 9+ hours per bud and 35+ hours total with the case, IPX4 sweat resistance, Bluetooth 5.3, three EQ presets and a two-year warranty.
• JLab Go Air Pop+ — biggest trade-off: No active or passive noise cancellation on the spec sheet, and only a 6mm dynamic driver, so it's tuned for convenience over raw output.
• Generic M25 — biggest strength: A 13.4mm dynamic driver in a case with an LED battery display and passive noise cancellation, plus a low 40ms latency figure.
• Generic M25 — biggest trade-off: Shorter overall runtime (20 hours from the case), a bulky case by modern standards, and only a one-month warranty.
• Who JLab Go Air Pop+ is for: Anyone who wants dependable daily earbuds for commutes and workouts with a fit they can adjust and software they can tweak.
• Who Generic M25 is for: Buyers who want a larger driver, a visible battery readout and noise reduction, and don't mind a chunkier case or a shorter warranty.
The Go Air Pop+ is built around stamina and fit. JLab rates each earbud at 9+ hours and the USB-C case at 26+ more, for 35+ hours total — that's a full workweek of commuting on a single case charge in the way most people actually use earbuds. The case itself is described as smaller than a credit card, so it disappears into a jeans pocket. And because the case has an integrated USB-C cable, you're not hunting for a cord when you do need to top up; ten minutes gets you about an hour of playback.
For workouts, the relevant spec is IPX4. That covers sweat and light rain, which is exactly the exposure you get on a run, a gym session or a walk in drizzle — it is not a claim of full waterproofing, so don't swim in them. JLab also includes three gel tip sizes (S/M/L), and that matters more than any marketing line: a secure seal is what keeps an earbud in during burpees and what makes bass audible in the first place. The buds are also 15% smaller than the previous generation, which helps if your ears are on the smaller side.
Sound is adjustable rather than fixed. The EQ3 system gives you Signature, Bass Boost and Balanced, and you can change them from the buds or in the JLab App, which also handles touch-control remapping. Bluetooth 5.3 covers iOS, Android and PC, Dual Connect lets you run either bud alone, and each bud has its own MEMS mic for calls. Voice assistant access is built in, and there's a Be Aware mode for letting ambient sound in.
Who should skip it? If you want genuine noise cancellation, this isn't it — the noise control field is listed as none. And if you're chasing maximum driver size, the 6mm dynamic driver here is modest. I'd steer you elsewhere for those two priorities.
The M25 leads with hardware numbers. A 13.4mm dynamic driver is more than double the diameter of the JLab's, and with a 98dB sensitivity rating and 32-ohm impedance, it's positioned as an easy-to-drive, loud, bass-forward in-ear. If you've used small-driver buds and found them thin, the physical size here is the reason to look.
The case is the other differentiator. It has a built-in LED display showing battery status and connection info, so you can see where you stand without opening an app or guessing from a blinking light. Charging takes 1.5 hours, and the case holds a 2000 mAh cell rated at 20 hours of use. The M25 also lists passive noise cancellation — that's physical isolation from the tip and housing rather than active circuitry, which is a meaningful distinction. It blocks some ambient sound, but it won't silence a plane cabin the way ANC does. Latency is listed at 40ms, a useful figure for anyone gaming or watching video.
On workouts, the spec sheet says the design is protected against splashes and sweat, and the description calls out outdoor use directly. So the intent is clearly there. What gives me pause is the size: the case measures 3.5 x 2.5 x 1.5 inches and weighs 2.5 ounces, which is noticeably bulkier than a pocket-friendly case. You'll feel it in a shorts pocket or a running belt. The warranty is also stated as one month, which is short.
Side-by-Side: Which Should You Choose?
• Best for battery life → JLab Go Air Pop+. 9+ hours per bud and 35+ hours total versus 20 hours from the M25 case.
• Best for a secure, adjustable fit → JLab Go Air Pop+. Three gel tip sizes and smaller buds make it easier to dial in comfort for long wear.
• Best for driver size and output → Generic M25. A 13.4mm dynamic driver against the JLab's 6mm.
• Best for monitoring battery at a glance → Generic M25. The LED display on the case shows status and connection info directly.
• Best for quieting your surroundings → Generic M25. Passive noise cancellation is listed; the JLab lists none.
• Best for gaming and video sync → Generic M25. A 40ms latency figure is stated on the spec sheet.
• Best for low-latency audio and long-term peace of mind → JLab Go Air Pop+. Two-year warranty, Bluetooth 5.3, Dual Connect and app-based EQ.
• Best for travel and pocket carry → JLab Go Air Pop+. The case is described as smaller than a credit card; the M25 case is 3.5 x 2.5 x 1.5 inches.
For most people shopping for TWS earbuds for workout use, I'd buy the JLab Go Air Pop+. The combination of 35+ hours of total playtime, IPX4 sweat resistance, three tip sizes, Dual Connect and a two-year warranty is a more complete package than raw driver size alone. In my opinion the M25 wins on paper in two places — driver diameter and noise reduction — and if those are your top priorities, it's a reasonable pick. But the bulky case and one-month warranty are real costs. Check the current price on Amazon for both before you commit, since that's the one variable specs can't settle for you.
FAQ
how to connect tws earbuds
how to reset tws earbuds
A reset normally means clearing the buds' stored pairing list so they can be paired fresh. The exact button combination varies by model and isn't specified on either data sheet here, so check the manual that ships with your buds. If you're having trouble connecting, deleting the earbud entry from your phone's Bluetooth list and pairing again often fixes it.
how to pair tws earbuds
Take both buds out of the case so they link to each other first, then open your phone's Bluetooth settings and pick the earbud name. The JLab supports Dual Connect, so you can pair and use either bud on its own if you prefer. Keep the buds within the rated range — 10 meters for the JLab and 33 feet for the M25.
how to tws earbuds
TWS stands for True Wireless Stereo: two independent earbuds that connect to your device with no wire between them. Practically, that means you charge them in a case, control playback by touch, and can often use one bud at a time. Both of these models are TWS, with touch controls and a charging case.
• E-filliate DEWALT Heavy Duty vs Jesebang Earbuds
• SleepPhones AcousticSheep Classic vs Easysleep 3D
• Amazon Renewed yperX Cloud Alpha vs FIFINE Gaming Microphone &
• QearFun Kids Cat Ear vs Cubitt Tracking Technologies Power Headphones
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.