How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-18 · 6 min read · Independent comparison
• JLab Go Air Pop+ biggest strength: three built-in EQ signatures (Signature, Bass Boost, Balanced) you can switch on the bud itself, plus app control and a two-year warranty.
• JLab Go Air Pop+ biggest trade-off: IPX4 only means sweat and light rain — not the kind of soaking an IPX7 rating invites.
• NANSLS Earbuds biggest strength: a smart touchscreen charging case that handles volume, EQ, timer, flashlight, camera remote and find-earbuds without you touching your phone.
• NANSLS Earbuds biggest trade-off: the spec sheet lists a 1-year warranty and a 5-inch driver size that reads like a listing error, so I'd treat the audio claims with a little caution.
• Who JLab Go Air Pop+ is for: commuters and podcast listeners who want small buds, an app, and a brand that will still answer the phone in year two.
• Who NANSLS Earbuds is for: people who want a screen on the case, longer total battery, and IPX7 for sweaty workouts or rainy walks.
The Go Air Pop+ is a small-bud story. JLab says these are 15% smaller than the previous generation, and the case is smaller than a credit card, which matters more than spec sheets admit — a case that disappears into a jeans pocket is a case you actually carry. You get 9+ hours per earbud and 26+ more from the USB-C case, for 35+ hours total. That's roughly a full workweek of commutes on one charge, and a 10-minute top-up reportedly buys you about an hour of playback, which is the kind of detail that saves you on a rushed morning.
The feature list is what separates it from no-name rivals. EQ3 gives you three sound signatures — Signature, Bass Boost, Balanced — and you can flip between them without opening an app. There's also a JLab app for EQ tweaks and touch-control remapping, Be Aware Mode so ambient noise comes through when you're crossing a street, Google Fast Pair on Android, and MEMS mics in each bud for calls. Dual Connect means either earbud works independently, so you can take a call with one ear free. Bluetooth 5.3, 16 ohm impedance, 20Hz–20kHz, a 6mm dynamic driver, 30 feet of range, and a two-year JLab warranty round it out.
Buy these if you want a genuinely pocketable set with app control, three tunable sound profiles, and call handling that works across iOS, Android and PC. Skip them if you need water resistance for heavy sweat, if you want an active noise cancellation claim, or if a smart screen on the case is the thing that appeals to you. The Go Air Pop+ has no ANC and IPX4 only — that's the honest ceiling.
The NANSLS Earbuds lead with the case, not the buds. The charging case has a smart touchscreen, and from it you can control music, volume, calls, EQ modes, wallpapers, a timer, a flashlight, a camera remote, and a find-earbuds function. That is a genuinely unusual feature set at this tier, and for some people it's the whole reason to buy — you can leave your phone in your bag on a run and still skip tracks, adjust volume or snap a photo remotely. If that sounds like a gimmick you'd never use, that's a fair read too; it's the kind of feature you either lean on daily or ignore completely.
Battery is the other headline. NANSLS claims 6–9 hours per charge and up to 48 hours with the case, with a battery display on the smart screen and Type-C charging. That's a longer total figure than the JLab's 35+ hours, and the on-case battery readout is a small but real convenience. Bluetooth 5.4 is listed for fast pairing and automatic reconnection, with 33 feet of range and 60ms latency quoted — low enough that lip-sync on video should be fine. ENC microphones handle call noise reduction, and the fit is a lightweight in-ear design rated IPX7, which is a meaningfully tougher water rating than IPX4.
Two things I'd flag. The warranty is listed as one year versus JLab's two. And the product information lists a "5 inch" audio driver alongside a 200Hz frequency response — that combination doesn't line up with how in-ear drivers work, so I'd treat the driver spec as unreliable and judge these on the case, battery and IPX7 rating instead. The item weight of 1.76 ounces and a 2.5 x 2.5 x 1.5 inch case also suggest a bulkier package than the JLab's credit-card-sized one.
Buy these if total playtime, a screen on the case and IPX7 protection top your list. Skip them if you want app-based control, a longer warranty, or the smallest possible carry.
• Best for total battery life → NANSLS Earbuds, with up to 48 hours versus 35+ hours on the JLab.
• Best for a small, pocketable case → JLab Go Air Pop+, whose case is smaller than a credit card.
• Best for water and sweat resistance → NANSLS Earbuds, rated IPX7 against the JLab's IPX4.
• Best for on-bud sound tuning → JLab Go Air Pop+, with three EQ3 signatures plus app control.
• Best for leaving your phone in your pocket → NANSLS Earbuds, thanks to the smart touchscreen case.
• Best for warranty peace of mind → JLab Go Air Pop+, covered for two years instead of one.
• Best for the newest Bluetooth version → NANSLS Earbuds on paper at 5.4, though JLab's 5.3 is still fast and stable across iOS, Android and PC.
• Best for hands-free calls with one ear free → JLab Go Air Pop+, since Dual Connect lets either bud work alone.
I'd buy the JLab Go Air Pop+. In my opinion, the combination of a genuinely pocketable case, three switchable EQ signatures, app control, Be Aware Mode, Dual Connect and a two-year warranty is the more complete package for how most people actually use earbuds — commuting, calls, podcasts, the gym. The NANSLS Earbuds win clearly on total battery and IPX7, and that smart case is a real differentiator if you'd use it. But the one-year warranty and that odd driver spec make me less confident in the long run. If you want the screen and the extra hours, go NANSLS. Otherwise, JLab is the safer everyday pick for me. Either way, check the current price on Amazon before you commit — the button on this page takes you straight there.
FAQ
No. The spec sheet lists noise control as "None." What you do get is Be Aware Mode, which lets ambient sound in for safer listening, plus three EQ signatures you can switch between. The NANSLS Earbuds list active noise cancellation instead.
JLab quotes 9+ hours per earbud and 26+ hours from the case, for 35+ total. NANSLS quotes 6–9 hours per charge and up to 48 hours with the case. Both charge over USB-C, and NANSLS adds a battery readout on the case screen.
On paper, the NANSLS Earbuds — IPX7 resists sweat and rain far better than the JLab's IPX4. The JLab counters with three gel tip sizes (S/M/L) for dialing in a secure fit, which matters just as much when you're moving.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.