How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-23 · 6 min read · Independent comparison
• JLab Go Air Pop+ biggest strength: App-based EQ3 tuning (Signature, Bass Boost, Balanced), Dual Connect for using either bud alone, and a 2-year JLab warranty.
• JLab Go Air Pop+ biggest trade-off: IPX4 only, no active noise cancellation, and a 6mm dynamic driver — modest next to the Wekily's 14.2mm unit.
• Wekily Earbuds biggest strength: 14.2mm drivers, four ENC microphones with active noise cancellation, IPX7 waterproofing and a dual LED battery display.
• Wekily Earbuds biggest trade-off: No companion app, no stated warranty, and a shorter per-bud runtime of 6–8 hours.
• Who JLab Go Air Pop+ is for: Commuters, students and anyone who wants to fine-tune sound and take calls with either earbud.
• Who Wekily Earbuds is for: Runners, gym-goers and heavy sweaters who need bigger bass, noise cancellation and real water protection.
The Go Air Pop+ is the more "software-smart" of the two. Bluetooth 5.3 handles the connection across iOS, Android and PC, and the JLab App lets you reshape the sound yourself — Signature, Bass Boost or Balanced. That's a genuinely useful feature at this level, because you're not stuck with whatever tuning the factory picked. Each earbud also carries its own MEMS microphone, so calls stay clear, and Dual Connect means you can pop in just one bud and keep the other ear open.
Battery is where it quietly wins. JLab rates it at 9+ hours per earbud and 26+ hours from the case, for 35+ hours total. The case has an integrated USB-C cable, and JLab says 10 minutes of charging gets you an hour of playback. The buds themselves are 15% smaller than the previous generation, the case is smaller than a credit card, and you get three gel tip sizes to dial in fit. It's IPX4, so sweat and light rain are fine — a hard downpour or a pool is not.
Wekily Earbuds: Who It's For
The Wekily Earbuds (model S50) lead with hardware. The 14.2mm dynamic drivers are more than twice the diameter of the JLab's 6mm units, and the spec sheet pairs that with an 80-ohm impedance and 38dB sensitivity — numbers that point toward a louder, bass-forward presentation. Four ENC microphones plus active noise cancellation are the headline: Wekily claims vocal enhancement of up to 85% and ambient noise reduction of up to 90%. I can't verify those percentages, but the design intent is clear — clearer calls in noisy places and a quieter listen overall.
Battery is 6–8 hours per bud with up to 40 hours in the case, and the dual LED display shows each side's charge separately so you're never guessing. Type-C charging gives roughly an hour of music from 10 minutes plugged in. The buds weigh 4 grams each and the case 30 grams, so portability is genuinely good. You get three silicone tip sizes and a Type-C cable in the box.
The standout is IPX7 waterproofing. That's a real step up from IPX4 — splash, rain, sweat and brief immersion are all in scope, which is exactly what a runner or gym regular wants. It also supports Bluetooth 5.3 with one-step pairing and up to 15 meters of range, and works with iOS, Android, tablets, laptops and TVs.
The trade-offs are honest ones. There's no app, so you can't retune the sound beyond the factory profile. There's no stated warranty in the data sheet. And that 80-ohm impedance means they may want a bit more power than low-impedance buds — worth knowing if your source is a weaker device. If those don't bother you, the Wekily is the more rugged, more feature-dense pair.
One more practical note for the Wekily: because it lists active noise cancellation and touch controls, you'll be relying on the touch surface for everything — answer/reject/hang up, track skipping and voice assistants. That's convenient, but it also means getting used to the tap zones, since there's no app to remap them. The JLab, by contrast, gives you the app to adjust touch controls and EQ, which is the friendlier path if you like to customize.
• Best for battery life → JLab Go Air Pop+. 35+ hours total versus 48 hours claimed by Wekily, but JLab's 9+ hours per bud beats Wekily's 6–8 hours on a single charge.
• Best for sound customization → JLab Go Air Pop+. EQ3 presets plus the JLab App let you change the tuning; Wekily ships a fixed profile.
• Best for bass and loudness → Wekily Earbuds. 14.2mm drivers, 80-ohm impedance and 38dB sensitivity.
• Best for noise cancellation → Wekily Earbuds. Active noise cancellation with four ENC mics; JLab lists no noise control.
• Best for workouts and rain → Wekily Earbuds. IPX7 waterproofing versus IPX4 sweat/light-rain resistance.
• Best for calls with one ear free → JLab Go Air Pop+. Dual Connect lets either bud work independently.
• Best for charging convenience → JLab Go Air Pop+. The case has a built-in USB-C cable; Wekily needs its own Type-C cable.
• Best for peace of mind → JLab Go Air Pop+. A stated two-year JLab warranty versus none listed for Wekily.
I'd buy the JLab Go Air Pop+ for most people. The app-based EQ, Dual Connect, longer per-bud battery and two-year warranty make it the safer, more flexible daily pair — and flexibility is what you actually notice over months of use. I'd switch to the Wekily Earbuds only if your priority is loud, bassy sound with active noise cancellation and you need IPX7 for serious sweat and rain. That's a specific, sport-first buyer. Everyone else gets more long-term value from the JLab.
Open your phone's Bluetooth settings, make sure Bluetooth is on, then put the earbuds in pairing mode. Both of these use Bluetooth 5.3 — the Wekily supports one-step pairing, so after the first connection it pairs automatically when you open the case. The JLab also pairs with Android devices via Google Fast Pair.
Once paired, both pairs use touch controls. The JLab uses touch for volume and playback, with the JLab App handling EQ and Be Aware settings. The Wekily uses smart touch for answering/rejecting calls, skipping songs and triggering voice assistants. Fit matters too — both include three tip sizes (S/M/L).
The general method is to delete or "forget" the earbuds in your device's Bluetooth list, then put the buds back in the case and re-pair from scratch. Neither data sheet lists a dedicated reset procedure, so clearing the saved pairing on your phone is the reliable first step.
This is a different brand's process — but the principle is identical: enable pairing mode on the earbuds, open Bluetooth settings, select the device. If you're comparing these two, note that the JLab works with iOS, Android and PC, while the Wekily covers iOS, Android, tablets, laptops and TVs.
If you're weighing these up, check the current price on Amazon before deciding — that's the one spec sheet number neither product lists here.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: JLab Go Air Pop+ vs Thunelec Earbuds, Skullcandy Push vs JLab Go Air Pop+, Wekily Earbuds vs jevesen Earbuds: Premium Wireless Earbuds