conference presentations/ publications

1.       Jinoop Arackal Narayanan, Farzaneh Kaji, Ali Zardoshtian, Mark Zimny, Ehsan Toyserkani, Process Optimization and Characterization of SS 316L Wall and Bulk Structures Built Using a Robotic Laser Directed Energy Deposition System, NSERC HI-AM Conference, Montreal, June 21 - 22, 2022.

2.       Farzaneh Kaji, Howard Nguyen-Huu, Alikasim Budhwani, Jinoop Narayanan, Mark Zimny, Ehsan Toyserkani, A Deep-Learning-based In-Situ Surface Anomaly Detection in Laser Directed Energy Deposition-Powder Fed, NSERC HI-AM Conference, Montreal, June 21 - 22, 2022.

3.       A N Jinoop, S K Nayak, C P Paul, Understanding the Effect of Interlayer Delay on Hastelloy-X Wall Structures built using Laser Directed Energy Deposition based Additive Manufacturing, International Conference on Product Life Cycle Modelling, Simulation and Synthesis (PLMSS), PLMSS TRUST, 17-18 December, 2021, Trivandrum (online).

4.       S K Nayak, A N Jinoop, C P Paul, K S Bindra, Parametric Investigation of LPBF of IN625 at Poor Overlap Index (30%) and at Higher Layer Thickness (100 µm) International Conference on Product Life Cycle Modelling, Simulation and Synthesis (PLMSS), PLMSS TRUST, 17-18 December, 2021, Trivandrum (online)

5.       A N Jinoop, C P Paul, K S Bindra, Hybrid Additive Manufacturing through Sequential Layer-by-layer Laser Directed Energy Deposition and Remelting for Improved Hastelloy-X Properties, NSERC HI-AM Conference, June 01 -02, 2021.

6.       C P Paul, A N Jinoop, K S Bindra, Process Methodology for Laser Directed Energy Deposition of Hastelloy-X Printed Circuit Heat Exchangers, NSERC HI-AM Conference, June 01 -02, 2021.

7.       Sunil Yadav, A K Rai, C P Paul, A N Jinoop, K S Bindra, Laser Directed Energy Deposition based Additive Manufacturing of Copper-Stainless Steel Functionally Graded Structures, NSERC HI-AM Conference, June 01 -02, 2021.

8.       A N Jinoop, C P Paul, K S Bindra, “Advancements in Post-Processing of Metal Additive Manufactured Components”, International Conference on Advances in Mechanical Engineering ICAME-2020, JULY 09-10, 2020, SAIT Vidisha.

9.       P K Diljith, A N Jinoop, C P Paul, K S Bindra, “Effect of Process Parameters and Microstructure on Corrosion Behaviour of Metal Additive Manufactured Components”, International Conference on Advances in Mechanical Engineering ICAME-2020, JULY 09-10, 2020, SAIT Vidisha.

10.     A. N. Jinoop, C. P.Paul , K.S.Bindra, An Innovative Approach for Directed Energy Deposition based Laser 3D Printing of Metallic Compact Heat Exchangers, National Aerospace Manufacturing Seminar, NAMS 2019, Dec 06 – 07, 2019, Trivandrum (Best Paper Award).

11.     Jinoop A.N., Paul C.P., Nayak S.K., Kumar H., Bindra K.S., Effect of Scan Strategy on the Geometry of Laser Additive Manufactured Wall Structures, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019, IIT Indore.

12.      A C Paul, A N Jinoop, C P Paul, J S Reddy, Multi-Objective Analysis on Additive Manufacturing of Components at Different Build Orientations, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019, IIT Indore.

13.     S. Yadav, C. P.Paul, A.N.Jinoop, A.K.Rai, K.S.Bindra, Laser aided directed energy deposition of Cu on SS 304L,Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019, IIT Indore.

14.     Jitender K. Chaurasia, Danish Ashraf, A N Jinoop, Srikanth Bontha, C. P. Paul, K.S. Bindra, An enthalpy based finite element approach to predict single track geometry during Laser Directed Energy Deposition of Inconel 718, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), December 12-14, 2019, IIT Indore.

15.     Jitender K. Chaurasia , A N Jinoop, Parthasarathy, Srikanth Bontha, C. P. Paul, K.S. Bindra,  Understanding thermo-fluid conditions during laser surface melting of IN625, Indian Institute of Metals Annual Technical Meet 2019, 15 - 16 November 2019, Thiruvananthapuram.

16.     A. N. Jinoop, C. P. Paul, J. G. Kumar, G.V. Prasad Reddy  and K.S. Bindra, Investigating High Temperature Mechanical Behavior of Laser Directed Energy Deposited Hastelloy-X using Automated Ball Indentation, Indian Institute of Metals National Metallurgical Day- Annual Technical Meeting, 15 – 16 November 2019, Thiruvananthapuram.

17.     P.K.Diljith, C.P.Paul, A.N.Jinoop, P. Krishna, S. Bontha, K.S.Bindra, Investigating corrosion behavior of Laser Directed Energy Deposited Inconel 718 in different acidic environments, Indian Institute of Metals National Metallurgical Day- Annual Technical Meeting, 15 – 16 November 2019, Thiruvananthapuram.

18.     Jinoop A N, Novel Methodology for Laser 3D Printing of Metallic Micro-Channel Heat Exchangers, 34th Madhya Pradesh Young Scientist Congress, RGPV Bhopal, Feb 28- March 01, 2019 (Best Paper Award).

19.     A. Sahu, A N Jinoop, C P Paul, Adepu Kumar , K S Bindra, “Numerical Modeling of High Energy Density Beam Assisted Machining of Hardened Armour Steel”, International Conference on Applied Mechanical Engineering Research. (ICAMER - 2019), NIT Warangal, May 02-05, 2019.

20.     K Dileep, A N Jinoop, C P Paul , M Baral , Y Ravikumar , K S Bindra,  “Investigating High Temperature Oxidation of Hastelloy-X Fabricated by Laser assisted Directed Energy Deposition”, International Conference on Applied Mechanical Engineering Research. (ICAMER - 2019), NIT Warangal, May 02-05, 2019.

21.     A N Jinoop, C. P. Paul, C H Premsingh, U Kumar, K. S. Bindra (2018), Laser Additive Manufacturing using Hastelloy-X: Process Development and Characterization,  RSM-HBNI-2018  on  Materials Science and Engineering  of Nuclear Materials, IGCAR, Kalpakkam, 2018.

22.     A N Jinoop , S. Yadav, C P Paul, U Kumar, C H Premsingh, K S Bindra, “Laser Additive Manufacturing of Overhang Walls using Direct Energy Deposition”, DAE-BRNS National Laser Symposium (NLS-27), RRCAT Indore, December 3 – 6, 2018.

23.      S K Nayak, S K Mishra, C S Mandloi, A N Jinoop, C P Paul, K S Bindra, “Parametric Investigation on Indigenously Developed Powder Bed Fusion based Laser Additive Manufacturing using SS316L”, DAE-BRNS National Laser Symposium (NLS-27), RRCAT Indore, December 3 – 6, 2018.

24.      J Denny, A N Jinoop, C P Paul, C H Premsingh, U Kumar, K S Bindra, “Fatigue Behaviour of Nickel based superalloys fabricated by Laser Additive Manufacturing using Directed Energy Deposition with two ifferent rastering patterns”, DAE-BRNS National Laser Symposium (NLS-27), RRCAT Indore, December 3 – 6, 2018.

25.      J Derek, A N Jinoop, C P Paul, S L Nidhin, NG Rasu and K S Bindra, “Investigating the Effect of Geometry on Micro-Channel Heat Exchangers Using CFD Analysis”, 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity University Uttar Pradesh, Noida, October 3 – 5, 2018.

26.      S M Banait, A N Jinoop, C P Paul, H Kumar, R S Pawade, K S Bindra, Investigating Laser Additive Manufacturing of Functionally Graded Ni-Cr-B-Si and SS 316L (December 21, 2017). International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017), VJTI Mumbai, December 21-22, 2017.

27.      J Denny, A N Jinoop, C P Paul, P Vamsi Krishna, K S Bindra, “Investigating Laying of Hastelloy-X Tracks using Powder Feed based Laser Additive Manufacturing, International Conference on Advanced Materials and Processes (ADMAT-2017), Thiruvananthapuram, December 14-16, 2017.

28.      A N Jinoop, C P Paul, S Bhartiya, J Denny, S K Nayak, S Karand K S Bindra, Investigating effects of Solution Treatment on Powder Bed Laser Additive Manufactured Inconel 718, DAE-BRNS National Laser Symposium (NLS-26), BARC Mumbai, December 20-23, 2017.

29.     A.N.Jinoop, C.P.Paul, U.Kumar, B.Singh, S. Saxena, Tailoring Microstructures and Mechanical Properties Of Laser Additive Manufactured Inconel 718 By Heat Treatment, Proceedings of the 1st International and 18th ISME Conference, ISME 18, February 23rd – 25th, 2017, NIT Warangal, Warangal

30.     Ankita S,U Kumar, A N Jinoop, C P Paul, D Nagpure, B Singh,S B Ghosh, “Study on Laser Additive Manufacturing of Gradient Nickel Layers on Copper”, DAE-BRNS National Laser Symposium (NLS-25),KIIT University, Bhubaneswar, December 20 - 23, 2016.

31.     S Shubham, A N Jinoop, U Kumar, C P Paul, D. Nagpure , Y Ravikumar and B Singh, “Investigating track geometry of Inconel 718 for Laser Additive Manufacturing of Micro-Channel Heat Exchangers”, DAE-BRNS National Laser Symposium (NLS-25),KIIT University, Bhubaneswar, December 20 - 23, 2016.

32.      Jinoop A.N. and S. Kanmani Subbu, “Review of Ceramics Processing by Additive Manufacturing”, Proceedings of International Conference on Ceramics and Advanced Materials for Energy and Environment (2015) Bangalore, India.