How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want wireless freedom and long battery life for everyday listening, choose JBL Tune 510BT; if you need wired studio accuracy for recording, mixing or monitoring, choose MAONO MH700.
• JBL Tune 510BT — biggest strength: Bluetooth 5.0 wireless streaming with dual-device switching and up to 40 hours of playback per charge. Biggest trade-off: no wired jack, so you are fully dependent on battery and Bluetooth.
• MAONO MH700 — biggest strength: A wired, closed-back over-ear design built for studio work, with a 50 mm dynamic driver, 32 ohm impedance and 100 dB sensitivity. Biggest trade-off: the cable ties you to your gear, so it is not a grab-and-go headphone.
• Pick JBL Tune 510BT if you want on-ear headphones for commuting, calls, workouts and casual music with voice assistant control.
• Pick MAONO MH700 if you record podcasts, mix, DJ or monitor instruments and need a reliable, latency-free wired connection.
• The core split: JBL is about convenience and portability; MAONO is about purpose-built audio work.
The Tune 510BT is a Bluetooth 5.0 on-ear headphone with JBL's Pure Bass tuning. It streams wirelessly from your phone, tablet or laptop, and the dual-device pairing is genuinely useful — you can be listening on one device and switch over when a call comes in on another. The frequency range runs 20 Hz to 20 kHz, so it covers the full audible spectrum, and the dynamic drivers are tuned for the kind of low-end emphasis most people want from everyday music.
Battery is where it shines. Up to 40 hours of average life on a 2-hour charge means you can go days, sometimes weeks, without thinking about a charger. The adjustable headband is designed to fit a wide range of head sizes, and on-ear cushions keep it light enough for long commutes. Controls sit on the ear cups, and there is a multi-function button that wakes Siri or Google Assistant — handy when your phone is in a pocket or bag.
MAONO MH700: Who It's For
The MH700 is a different animal entirely. It is a wired, closed-back, over-ear studio headphone with a 50 mm dynamic driver — noticeably larger than what you typically find in casual listening gear. Impedance is 32 ohm and sensitivity is 100 dB, which tells you it is easy enough to drive from a laptop, phone or interface without demanding a dedicated headphone amplifier. Frequency range is 20 Hz to 20 kHz, and audio latency is listed at 10 ms, which matters when you are tracking vocals or playing an instrument and cannot tolerate a wireless delay between what you play and what you hear.
The closed-back design is the other key point. Closed cups limit sound leaking out and reduce what bleeds in, and MAONO lists this as sound isolation. That is exactly what you want for podcast recording, DJ monitoring and studio work — you hear your mix, not the room. In the box you get both a 1.2 m straight 3.5 mm cable and a 3 m coiled 3.5 mm-to-6.35 mm cable, plus a storage bag. The 6.35 mm adapter is what lets you plug into a guitar amp, piano keyboard, mixer or interface with a full-size jack, while the shorter straight cable suits a phone or laptop. Weight is 400 g, so it is a substantial headphone — built to sit still on your head during a session rather than disappear in a pocket.
Who should buy it: podcasters, home-studio recordists, DJs, musicians monitoring an amp or keyboard, and anyone who wants a dependable wired headphone for critical listening. Who should skip it: if you mostly listen on the move, hate cables, or want hands-free calling and voice assistant control, the MH700 will feel like the wrong fit.
Side-by-Side: Which Should You Choose?
• Best for battery life → JBL Tune 510BT. Up to 40 hours of playback on a 2-hour charge, with no cable to manage.
• Best for studio and recording work → MAONO MH700. Closed-back isolation, 50 mm drivers and 10 ms latency suit tracking and monitoring.
• Best for plugging into instruments and gear → MAONO MH700. The included 3.5 mm-to-6.35 mm coiled cable covers amps, keyboards, mixers and interfaces.
• Best for hands-free calls and voice assistants → JBL Tune 510BT. Ear-cup controls plus one-button access to Siri or Google Assistant.
• Best for one headphone that does everything on a desk → MAONO MH700. It works with phones, computers and pro audio gear without needing a charge.
• Best for low-distraction listening in a shared room → MAONO MH700. Closed-back cups with sound isolation keep your audio in and the room out.
The honest framing here is that these two barely compete. One is a wireless lifestyle headphone; the other is a wired monitoring tool. The overlap is only "they both play sound." If your day is phone-first and cable-free, the JBL wins on convenience every time. If your day involves a DAW, a mixer or an amp, the MAONO is the one that will actually do the job.
If I had to pick one for the average buyer, I would take the JBL Tune 510BT. Most people listen on a phone, want to move around, and value 40 hours of battery over studio-grade isolation — and for that, the JBL is simply the more useful everyday headphone. But if you make audio rather than just consume it, my recommendation flips hard to the MAONO MH700: the wired connection, closed-back isolation, 50 mm drivers and the 6.35 mm adapter make it the right tool for recording, mixing and instrument monitoring. Buy for the job you actually do, not the spec sheet that looks shinier.
Yes, for recording and monitoring. The MH700 is wired with 10 ms latency, closed-back isolation and a 50 mm driver, so there is no wireless delay and less sound bleed. The JBL is wireless-only with no jack, which makes it a poor fit for tracking.
No. The Tune 510BT is Bluetooth-only with no headphone jack, so it cannot connect to an amp, mixer or interface by cable. For that, you want the MAONO MH700, which includes 3.5 mm and 6.35 mm cables.
It depends on how you use it. The JBL is a lightweight on-ear with an adjustable headband, which suits casual listening and commuting. The MH700 is a 400 g over-ear with faux leather and metal construction — heavier, but designed to stay stable during studio sessions.
Probably not. At 32 ohm impedance and 100 dB sensitivity, it is easy to drive from a laptop, phone or interface. You can add an amp for headroom, but it is not required for normal listening.
Both are sold on Amazon, and pricing changes often, so check the current price on Amazon using the button on this page before you decide.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: JBL Endurance Peak 3 vs KLKE Bone Conduction Headphones, ROLLS PM351 vs Kellards Focusrite Scarlett Solo, Ainostone Transmitter Receiver 3-in-1 vs myFirst CareBuds Kids Earbuds