The following table resumes all the technical specifications including the protocols/standards supported, voice codecs, telephony features, languages, and upgrade/provisioning settings for the GXP21xx series.
Contacts sub menu is for Local Phonebook, Local Group, LDAP Directory and Broadsoft Phonebooks. User could configure phonebooks/groups/LDAP options here, download phonebook XML to the phone and search phonebook/LDAP directory.
Jasmine Please Pickup The Phone Ringtone Download
Download File 🔥 https://urllio.com/2yGAsk 🔥
Shiftable: After pressing the number button, user will see the IDs of the characters that matching to the button. User can select the desired character by entering the corresponding ID on keypad.
The URL or IP address, and port of the SIP server. When configured, phone will register to both Primary and Secondary SIP Server. If Primary SIP Server is not reachable then the phone will use Secondary SIP Server for phone services (including making/receiving calls).
This option enables the utilization of symmetric response routing. When enabled, the "rport" field gets appended to the Via header in the SIP Request. The necessary data is then extracted from the SIP 200OK Response during a SIP Register operation, allowing the rewriting of SIP Contact information and its application in subsequent SIP Requests.
Enabled by Default.
Specifies the frequency (in minutes) in which the phone refreshes its registration with the specified registrar. The default value is 60 minutes.
The maximum value is 64800 minutes (about 45 days).
SIP T1 Timeout is an estimate of the round trip time of transactions between a client and server. If no response is received the timeout is increased, and request re-transmit retries would continue until a maximum amount of time define by T2. The default setting is 0.5 seconds.
SIP T2 Timeout is the maximum retransmit time of any SIP request messages (excluding the INVITE message). The re-transmitting and doubling of T1 continues until it reaches the T2 value. Default is 4 seconds.
Multiple vocoder types are supported on the phone, the vocoders in the list is a higher preference. Users can configure vocoders in a preference list that is included with the same preference order in SDP message.
Allows any number with leading digit 1 followed by a 3-digit number, followed by any number between 2 and 9, followed by any 7-digit number OR Allows any length of numbers with leading digit 2, replacing the 2 with 011 when dialed.
Note: In some cases, where the user wishes to dial strings such as *123 to activate voice mail or other applications provided by their service provider, the * should be predefined inside the dial plan feature.
Specifies matching rules with number, pattern or Alert Info text or string (up to 10 matching rules). When the incoming caller ID or Alert Info matches the rule, the phone will ring with selected distinctive ringtone. Matching rules:
Users could configure the matching rule as certain text (e.g., priority) and select the custom ring tone mapped to it. The custom ring tone will be used if the phone receives SIP INVITE with Alert-Info header in the following format: Alert-Info: ; info=priority
Users could configure the matching rule as certain string (e.g., string) and select the custom ring tone mapped to it. The custom ring tone will be used if the phone receives SIP INVITE with Alert-Info header in the following format: Alert-Info: Selects the distinctive ring tone for the matching rule. When the incoming caller ID or Alert Info test or string matches one of the 10 rules, the phone will ring with the associated ringtone.
3) During blind transfer, after transferor received 200/202 for REFER, but there is no NOTIFY from server after 7 seconds, transferor will decide to recover the call with transferee or not depending on the options. This is the only case that this option will be applied.
This parameter defines the local RTP port used to listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP; channel 1 will use port_value+2 for RTP. Local RTP port ranges from 1024 to 65400 and must be even. Default value is 5004.
Gives users the ability to define the parameter of the local RTP port used to listen and transmit. This parameter defines the local RTP port from 48 to 10000. This range will be adjusted if local RTP port + local RTP port range is greater than 65486. Default setting is 200.
Allows user to select a default account when other accounts have not been selected. The chosen account will be used for live DialPad and auto Redial. However, if this account is not active, then the first account that is active will be used.
Allows the phone to accept certain incoming calls while set to DND mode.
Off: all incoming calls will not be accepted.
Allow all: all incoming calls will be allowed.
Allow Only Contacts: only incoming calls from numbers in the local phonebook will be accepted.
Allow Only Favorites: only incoming calls from favorite numbers in the local phonebook will be accepted.
Allows users to hide the Caller ID from showing at the BLF VPK and EXT
Disabled: The VPK will flash between the Caller ID and the BLF account.
Enabled: The VPK will stay under the monitored account and only notify that there is an incoming call.
Click on Delete All in order to remove all Call History stored in the phone.
Note: Users could use the drop-down list to show only selected call history type (All, Answered, Dialed, Missed, Transferred) and also use navigation keys to browse pages when many entries exist.
For detailed instruction for this part, please refer to: [Outbound Notification Support] Section in this Administration Guide.
Setup Completed
Registered
Unregistered
Register Failed
Off Hook
On Hook
Incoming Call
Outgoing Call
Missed Call
Answered Call
Rejected Call
Forwarded Call
Established Call
Terminated Call
Idle to Busy
Busy to Idle
Open DND
Close DND
Open Forward
Close Forward
Open Unconditional Forward
Close Unconditional Forward
Open Busy Forward
Close Busy Forward
Open No Answer Forward
Close No Answer Forward
Blind Transfer
Attended Transfer
Transfer Finished
Transfer Failed
Hold Call
UnHold Call
Mute Call
IP Change
Auto-Provision Finish
Specifies the message body of the notification for each event that can be customized with embedded dynamic attributes.
For more details, refer to: [Outbound Notification Support] section in this Administration Guide.
Default Mode:
When the phone is in idle, press HEADSET button to off hook the phone and make calls by using headset. Headset icon will display on the screen in dialing/talking status.
When there is an incoming call, press HEADSET button to pick up the call using headset.
When there is an active call using headset, press HEADSET button to hang up the call.
When Speaker/Handset is being used in dialing/talking status, press HEADSET button to switch to headset. Press it again to hang up the call. Or press speaker/Handset to switch back to the previous mode.
Toggle Headset/Speaker:
When the phone is in idle, press HEADSET button to switch to Headset mode. The headset icon will display on the left side of the screen. In this mode, if pressing Speaker button or Line key to off hook the phone, headset will be used.
When there is an active call, press HEADSET button to toggle between Headset and Speaker.
Defines the URL or IP address of the NTP server. The phone may obtain the date and time from the server. Allow user to configure 2 NTP server domain names. GXP will loop through all of the IP addresses resolved from them.
Allows user to set up the backlight time (in minutes) for the extension board. Valid range from 0 to 90. Default value is 1.
Note: When Active Backlight Timeout is set to 0, the backlight will be constantly on.
Specifies the wallpaper source mode: Default, Download, USB, Uploaded and Color Background. User could upload a wallpaper source into your phone, or download it from file server with the server path, or plug your USB drive with wallpaper source into GXP2140/GXP2160/GXP2170 to upload the wallpaper.
Configures ring or tone frequencies based on parameters from local telecom. The default value is North American standard. Frequencies should be configured with known values to avoid uncomfortable high pitch sounds.
Allows to set Default Ringtone as their Global ringtone.
Note: The ringtone set in individual accounts has higher priority than this setting. If the user wants the default ring tone to be used globally, he needs to set the ring tone of each account to Default Ring Tone; Otherwise, it will be whichever ring tone you set.
Important: The Priority goes as Contact Ring Tone ? Account Ring Tone ? Default Ring Tone.
Shared Line
Share line for Shared Line Appearance feature. Select the Account registered as Shared line for the line key. The Value field can be left blank.
Note: Users can either show or hide VPK shared line display description, This only can be done with provisioning using the Pvalue P8484 (Value = 0; No . Value = 1; Yes)
Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects the information from the phones and sends it out in one single notify message. PBX server has to support this feature.
Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account. For example, if the phone is offhook and account 2 is active, it will call the configured Speed Dial number using account 2.
Call Return
The last answered calls can be dialed out by using Call Return. The Value field should be left blank. Also, this option is not binding to the account and the call will be returned based on the account with the last answered call. 152ee80cbc
motorola device manager 2.4.5 download