Circuit #1
Circuit #1
Picture of circuit one with second light
 Two light system on circuit one in action
Circuit one with adaptations to include a second light that it rotates between (pin 13 light, pin 11 light, pin 13 light...) with a 10th of a second delay
Circuit #2
Picture of circuit two with second light
Circuit two with potentiometer controlling two lights
Circuit two code with adaptations for a second led in pin 11 that is also controlled by the potentiometer
Circuit #3
Picture of circuit three
Circuit three running main colors and show spectrum code.
Circuit three code for main colors and show spectrumÂ
Circuit #4
Picture of circuit four with potentiometer
Circuit four with potentiometer in action.
Circuit four, one after another code with adaptation to use potentiometer to change the delay times.
Circuit #5
Picture of circuit 5
Circuit 5 code
Circuit 5 uses two buttons to turn a light on and off. When both buttons are pressed its off and when only one is pressed it turns on.
Circuit #6
Picture of circuit 6
Circuit 6 in action
Circuit 6 code
Circuit 6 uses a light sensor to change the brightness of a light. When it senses more light it dims and when it experiences less it gets brighter.
Circuit #7
Picture of circuit 7
Circuit 7 code and temperature readings
Circuit 7 uses a temperature sensor to read temperature before sending it back to the computer as seen above.
Circuit #8
Picture of circuit 8
Circuit 8 spinning the motor
Circuit 8 code
Circuit #9
Picture of circuit 9
Video of circuit nine playing the opening code (Never Gonna Give You Up)
Circuit 9 code