Lighting Help

Lighting Training

Incandescent & LED

This training offers you an opportunity to learn more about your light boards capabilities and how you can best use it to enhance your shows. You will learn about lighting control path. Incandescent vs LED coloring

Light Board Training available on these makers:

ETC (Legacy and modern), Leprechaun, American DJ models, Strand, & Chamsys

Available Services

Light Board Optimization:

Update and Install newest EOS Software possible*.
Remove unneeded data (Old shows)
Backup current show/patch.
Customize: Magic sheets, faders, fader wings and direct selects

Lighting Systems Inspection

Electric and Floor Pocket Inspections
Lighting and data Cable inspections
Lighting Instrument inspections

ETC Augment3d

Introduction to ETC Augment3d on ETC board or PC
Custom setup for Auditorium or Black Box
Show use (Live or Blind mode)

In House Light Board Training

Includes:

Light board orientation (Channels, Dimmers/Addresses, Submasters)
Address Patching
Fader Wing Setup
Basic Master Show Set up
Light Board Care and Maintenance
Dimmer systems care and Maintenance
DMX Wireless Systems Care and Maintenance.

Incandescent instrument Repair and Care

Most ETC and Altman fixtures
Basic Care
Connector Repair/Replacement/Swap
Lens care and replacement
Bench Focus
*LED Retrofit/Upgrade (if applicable)

Power and Data Cable Repair/Recycle

Damaged wire repair
Plug Replacement (Stage pin, Twist Lock, Power con)

Page updated

Google Sites

Report abuse