Installing Windows 7 Client Operating System

Step by steps method:

Step 1:

Backup your files. The installation process will delete all data on hard drive. It is recommended that you back up all files you want to keep before installing a new operating system. So You can back up your files to another hard drive, an external hard drive, a flash drive.

Step 2:

Restart your computer. If the computer is open, click start windows and select power button and then click restart. In another way, long press the power button of your computer and automatically restart it.

Step 3:

After that, press Del, Esc, F2, F10, or F9 when it restarts. Depending on the model of your computer, pressing one of these buttons immediately after you power on your computer will enter the system BIOS. But on the computer We use is by pressing Del on keyboard. But some computers tell you which button to press to enter the BIOS as the computer starts up.

Step 4:

Find your BIOS's boot options menu. The boot options menu of your BIOS may vary in location or name from the illustration, but you may eventually find it if you search around.

As you can see in this pictures…

Step 6:

Save the changes in the settings. Press the button indicated on the screen or select the save & exit option from the BIOS menu or press F10 on keyboard to save your configuration.

Step 7:

Start your computer from the USB flash drive installer. After that. When the computer starts, press a key if you are asked if you would like to boot from the USB flash drive by pressing any key. After you choose to start from the USB flash drive. Windows Setup will begin loading.

If you are not asked to boot from the USB Flash Drive, you may have done something wrong. Retry the previous steps and make sure you have selected the correct drive in the BIOS 1^st boot menu.

Step 13:

Select a hard drive and partition you want to install Windows on. A hard drive is a physical part of your computer that stores data, and partitions "divide" hard drives into separate sections. Click the hard drive or partition you want to install Windows 7 on.

If the hard drive has data on it, You'll need to use the following steps to Delete or Format the drive. Be aware that this will permanently erase all data from the disk.

o Select the hard drive from the list of hard drives.

o Click Drive options (advanced).

o Click Delete or Format all the Drive options.

o After that, Select the Partition Primary then click next

If your computer doesn't have any partitions yet, create one to install Windows on it.

Select the hard drive from the list of hard drives.

o Click Drive options (advanced).

o Delete all partition, after that Select New from Drive options.

o Select the size, and click Partition Primary

o And Click Next.

Step 14:

Install Windows on your preferred hard drive and partition. Once you've decided on where to install Windows, select it and click Next, but always use the primary partition when you install a windows. Windows will begin installing. Your computer may start and restart several times during the installation process.

Step 16:

Reboot your computer. After you have finished installing Windows 7 and have removed the USB drive, reboot your computer and allow it to boot up as normal.

Now Setting Up Windows Post-Installation

Step 20:

Choose your Windows Update settings. You can select "Use recommended settings", "Install important updates only", or "Ask me later".

o Use recommended settings automatically sets update and security settings recommended by Microsoft.

o Install important updates only configures your computer only to install necessary updates.

o Ask me later disables your security until you have made a decision.

But always Use Recommended Setting ..

After that windows is finalizing your setting.

Windos 7 Desktop

Windos 7 Control Panel