We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-17 · 7 min read · Independent comparison
If you want a complete wired gaming headset with a 50mm driver, an aluminum headband and a boom mic for PC and console play, choose IYGR K98; if you need fresh ear pads to bring a pair of JBL Tune headphones back to life, choose Hmoke Replacement Ear Pads. These two products sit in completely different categories, and the right pick depends entirely on whether you are buying a headset or repairing one.
• IYGR K98 — biggest strength: A full gaming headset in one box — 50mm dynamic drivers, a noise-isolating boom mic, a reinforced aluminum frame and memory foam cushions, wired across PC, PS5, PS4, Xbox One, Switch and Mac.
• IYGR K98 — biggest trade-off: It is wired only, uses a 3.5mm jack with no wireless mode, and it is a headset rather than a repair part — if you already own good headphones, it duplicates what you have.
• Hmoke Replacement Ear Pads — biggest strength: Slow-rebound memory foam wrapped in soft protein leather, shaped to fit specific JBL Tune models exactly, and swap-in simple with the included plastic removal tool.
• Hmoke Replacement Ear Pads — biggest trade-off: It only fits JBL Tune 700BT, 710BT, 720BT, 750BTNC, 760NC and 770NC models — it is useless on anything else, and it does not improve the sound of your headphones, only the comfort and the look.
• Who each pick is for: Buy the IYGR K98 if you need a headset to game and chat on; buy the Hmoke pads if you already own one of the listed JBL Tune headphones and the cushions are flat, cracked or uncomfortable.
The K98 is a plug-and-play wired gaming headset. Its centerpiece is a pair of 50mm dynamic drivers, and that size matters in practice — larger drivers generally move more air, which is why IYGR pitches this as delivering clear highs and deep bass. For anyone playing FPS or online multiplayer, the practical benefit is positional audio: being able to tell whether footsteps are coming from your left or behind you. The frequency response tops out at 20 KHz, sensitivity is rated at 105 dB and impedance is 32 ohm, which is a friendly load for a controller, a laptop or a motherboard jack — you will not need an amp to get usable volume.
The build is where this one separates itself from cheap plastic headsets. The headband is reinforced aluminum, and the frame materials are listed as ABS with a classic style. That combination is aimed squarely at people who are hard on their gear — tossing a headset into a bag, wearing it for four-hour sessions, adjusting it constantly. The memory foam ear cushions are oval-shaped and over-ear, and the headband is adjustable, so the fit is meant to hold up over long sessions without pressure points.
Communication is handled by a high-sensitivity mic with noise isolation built in. In practice that means your voice comes through clearly while background noise — a fan, a keyboard, a TV in the next room — is pushed down. There is a push-button volume control on the headset itself, and noise control is listed as sound isolation rather than active cancellation, so expect physical blocking of outside noise rather than electronic ANC.
Compatibility is broad: PC, PS5, PS4, Xbox One, Switch and Mac, all over a 3.5mm jack. There is a 2-year warranty, it weighs 8 ounces, and audio latency is listed at 15 milliseconds. The color is black with red accents.
Buy it if: you want one wired headset that covers console and PC gaming, you value a metal headband over an all-plastic one, or you need a mic for team chat. Skip it if: you need wireless, you want active noise cancellation, or you only need to fix headphones you already own.
This is a spare-parts product, and it is honest about that. Hmoke makes replacement ear pads specifically for the JBL Tune 700BT, 710BT, 720BT, 750BTNC, 760NC and 770NC. That list is the whole story — if your headphones are not on it, this product is not for you, and Hmoke says so plainly by asking buyers to confirm their model before ordering. That is not a limitation to complain about; it is the point. A pad that fits one headphone shell precisely will not fit another.
The materials are the real selling point. The foam is high-density slow-rebound memory foam, and it is wrapped in soft protein leather. Slow-rebound foam is the type that compresses under pressure and then eases back into shape rather than staying crushed, which is exactly the property you want in a cushion that sits against your ears for hours. Hmoke describes the fit as shaping to your ears, and the pads are built extra thick, which matters if your original pads have flattened out and your ears have started touching the driver grilles.
Installation is the part most people worry about, and Hmoke addresses it directly: no special tools, and a plastic removal tool is included in the box. The process is a few minutes of prying the old pads out and pressing the new ones into the same channel. The pads are the same shape as the originals, so the fit is meant to be indistinguishable once they are on. The color is black, the enclosure material is leather, and the dimensions are 3.15 x 0.98 x 3.54 inches. Hmoke backs them with a 1-year manufacturer warranty and promises a response within 24 hours if you have questions.
Buy it if: you own one of the listed JBL Tune models and your pads are flat, flaking, cracked or simply uncomfortable. Skip it if: your headphones are a different brand or model, or if what you actually want is a new headset rather than a repair.
• Best for gaming and voice chat → IYGR K98. The 50mm drivers and the noise-isolating boom mic are built for exactly this.
• Best for restoring headphones you already own → Hmoke Replacement Ear Pads. A few minutes of work and your JBL Tunes feel new again.
• Best for long-session comfort → both, for different reasons. The K98 uses memory foam cushions and an adjustable headband; the Hmoke pads use slow-rebound memory foam and protein leather.
• Best for durability → IYGR K98. A reinforced aluminum headband is a structural upgrade; ear pads are a wear item that will eventually need replacing again.
• Best for broad device compatibility → IYGR K98. PC, PS5, PS4, Xbox One, Switch and Mac over a single 3.5mm jack.
• Best for a narrow, guaranteed fit → Hmoke Replacement Ear Pads. They are made for six specific JBL Tune models and nothing else.
• Best if you need a microphone → IYGR K98. The Hmoke pads have no electronics at all.
• Best if you want to avoid buying a whole new headset → Hmoke Replacement Ear Pads. That is the entire value proposition.
In my opinion, the IYGR K98 is the better buy for most people reading this, and it is the one I would pick. It is a complete, self-contained product: 50mm drivers, a metal headband, a mic, multi-platform wired compatibility and a 2-year warranty. There is nothing to assemble and nothing to match up. The Hmoke pads are genuinely good at what they do — slow-rebound memory foam and protein leather are the right materials, and the included tool removes the main barrier to DIY replacement. But they only make sense if you already own one of the six listed JBL Tune models. If you do, buy them and skip the new headset. If you do not, they are simply not an option, and the K98 is the clear choice.
Only if you own a JBL Tune 700BT, 710BT, 720BT, 750BTNC, 760NC or 770NC. The pads are shaped for those models specifically, so check your model number before ordering. They will not fit other brands or other JBL lines.
No. They are cushions, not electronics. What they can change is comfort and seal — extra-thick slow-rebound foam that sits properly against your ears can restore the fit you had when the headphones were new, and a better seal is what keeps bass from leaking away.
No, it is wired only, connecting through a 3.5mm jack. That works with PC, PS5, PS4, Xbox One, Switch and Mac, and it means no battery to charge and no pairing. Audio latency is listed at 15 milliseconds, which is low enough for gaming.
Ask yourself one question: do I need a headset, or do I need to fix the one I have? If it is the first, get the IYGR K98. If it is the second and your headphones are on the compatibility list, get the Hmoke pads. If you are worried about cost, check the current price on Amazon using the button on this page before deciding.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.