A temperature tracker is a device that allows you to control temperatures without the need for a lot of human intervention. A temperature control system's controller will take an input from a temperature sensor, such as a thermocouple or RTD, and compare the actual temperature to the intended control temperature, or set point. The output will subsequently be sent to a control element. An application where the controller receives an input from a temperature sensor and has an output linked to a control device such as a heater or fan is a nice illustration. The warehouse monitoring is typically only one component of a temperature control system, thus the entire system should be examined and taken into account when choosing the right controller.
More about Digital Controllers
What Are the Different Types of Processor Temperature Controllers, and How Do They Work?
Process controllers are divided into three categories: on-off, proportional, and PID. The operator will be able to operate the process using one of two types, depending on the system to be controlled.
On/Off Temperature Controller
The most basic type of control device is an on-off temperature controller. The device's output is either on or off, with no in-between condition. When the temperature reaches the set point, an on-off controller will switch the output. When the temperature falls below the setpoint, the output turns on, and when the temperature rises over the setpoint, it turns off.
The temperature must surpass the set point by a specified amount before the output will switch off or on again, according to this disparity. If the cycling above and below the set point occurs very quickly, the on-off differential prevents the output from "chattering" or making fast, continuous changes. On-off control is commonly employed in situations when precise control is not required, such as in systems that cannot tolerate having the energy turned on and off frequently, in systems where the mass of the system is so large that temperatures vary slowly, or for a temperature alert. A limit controller is a form of on-off control that is used for alarms. When a particular temperature is achieved, this controller employs a latching relay that must be manually reset to shut off a process.
Proportional Control
Proportional controls are intended to eliminate the cycle that comes with traditional on-off switches. As the temperature approaches the specified point, a proportional controller reduces the average power provided to the heater. This slows down the heater, ensuring that it does not overrun the set point but instead approaches it and maintains a consistent temperature. Turning the output on and off for brief periods can achieve this proportioning effect. To manage the temperature, this "temporal proportioning" changes the ratio of "on" time to "off" time. Within a "proportional band" around the set point temperature, the proportioning operation takes place.