How to fix the cartridge's Ink

Sometimes the XP 2105 Ink and connected printers show the “Not recognized error." It is a troubleshooting problem that you need to fix. We have to tell you some fixes to find the cause of this problem and get the printing on time. You should follow the given below fixes to solve this not recognized error.

Fix 1- Check the basics.

There are some basics that you check quickly for all not recognized errors. They seem challenging, but you have to check them once

• Have you used the old cartridge for a while? Many compatible inks say they do not recognize errors when they are empty.

• Are you using the right cartridge for the printer? The wrong Epson e603xl Ink will return to the printer.

• Is the cartridge exist in the right slot? A black color cartridge in the slot may show the not recognized error.

Fix 2- Determine which cartridges has issues.

If your printer is only free to print for one cartridge with the error, you have to skip fix 3. If you want to replace the multiple cartridges or see the errors in the whole set, it is only the fault with the single cartridge registered across each cartridge.

You should find the error and fix the cartridge by following the solutions

• Remove the new cartridges that you installed and again install the old cartridges that are worked

• Then you have to start the printer again, and it will remove the error that shows " not recognized error."

• You have to now install any of one cartridge.

Start installing the new cartridges in series until the not recognized errors return. This is the fix for cartridge troubleshooting.

Fix 3- Clean the contact chip

In this solution, you must check every cartridge's copper banding. This is the contact chip and what communicates with the printer. You should give them every gentle wipe with a pencil eraser and cloth to ensure that they are dust free and clean.

Then you must install the cartridge to your machine and start the printer again to clear the error.

Fix 4- Do a hard reset.

As hard as it sounds, errors are only remembered by the printer. Once you clean the contact chip and install the cartridge again, turn the printer off at the plug. Then you have to wait for 30 seconds, and you should turn it on again. This fix will have more chances to work and often clear the error.

If this fix works and errors are cleared, then you are able to take the print of the cartridge free.

What if fixes do not work?

Still, if you get the same errors after the above fixes, your cartridges have faced a big default. In this situation, you have to come in touch with the supplier so they can replace your items and provide you with a new cartridge.