How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-29 · 7 min read · Independent comparison
• INF Replacement Earpads Cushions — biggest strength: a direct, tool-free replacement for worn Mpow 071 pads, built from PU leather and memory foam with a thick inner layer for a snug, noise-reducing seal.
• INF Replacement Earpads Cushions — biggest trade-off: it is a pair of cushions only. No drivers, no mic, no cable, no headband — it does nothing unless you already own the Mpow 071.
• Turtle Beach Airlite Fit — biggest strength: a complete wired headset with 40mm dynamic drivers, a bi-directional mic with flip-to-mute, on-ear volume control, and an officially licensed Nintendo tie-in across Switch 2, Switch, Switch Lite and OLED.
• Turtle Beach Airlite Fit — biggest trade-off: it is a closed, brand-specific system with a fixed 3.8 ft cable and a Mario Star theme, so it is not a repair part and not something you can move onto other headphones.
• Pick the INF pads if your Mpow 071 still works fine and only the cushions have gone flat, cracked or sweaty.
• Pick the Airlite Fit if you need a whole headset for Switch gaming and voice chat, not a spare part.
The INF pads exist for one job: bringing a specific headphone back to life. They are shaped to match the original Mpow 071 earcups, so the install is a snap-in affair rather than a glue-and-hope project. You pull the old pads off, line the new pair up with the earcups, and press them into place. No tools, no adhesive, no waiting. That matters if you like the Mpow 071's sound and just want the comfort back.
The materials are the real story here. PU leather over memory foam is the standard recipe for a reason: the foam compresses to your ear shape over time, and the faux leather skin keeps sweat and everyday grime off the foam core. INF also calls out crack, peel and sweat resistance on the cover, which is exactly the failure mode that kills cheap cushions first. The thick memory foam interior is designed to form a snug seal, which reduces ambient noise and keeps the original tuning intact rather than muffling or distorting it. If you wear headphones for long work blocks, gaming sessions or music marathons, that seal is what keeps ear fatigue from creeping in.
Turtle Beach Airlite Fit: Who It's For
The Airlite Fit is a full wired gaming headset, not a component. Turtle Beach built it around a 3.5mm jack, so it plugs straight into a controller or handheld and never needs charging — the cable is 3.8 ft, or about 1.15 m, which is short enough to stay out of your lap but you should think about whether that reach suits your setup. The sound comes from 40mm dynamic drivers with a 20Hz–20kHz frequency range and 35 ohm impedance, which is an easy load for a handheld or controller to drive without a separate amp.
Comfort is clearly the design priority. The headband is adjustable and the whole thing weighs 8 ounces, so it is light on the head during long sessions. The ear cushions use a jersey knit cover over foam in an over-ear, oval shape rather than sitting flat on the ear. Knit breathes better than leather-style covers, and the over-ear fit is what Turtle Beach leans on for bass and noise isolation. The mic is bi-directional with a flip-to-mute arm, so you can swing it up for instant radio silence. Volume lives on a wheel at the back of the left earcup.
The compatibility story is the other half of the pitch. It is officially licensed by Nintendo for Nintendo Switch 2, and it also works with the original Switch, Switch Lite and the OLED model. It ships with the cable, ear cushions, headband and a user manual, and carries a 2-year manufacturer warranty. The Mario Star theme is baked into the styling, so it is aimed at a specific kind of buyer.
Who should buy it: Switch players who want a cheap-to-own, charge-free headset with a mute mic and a light frame, and anyone who prefers a knit, over-ear cushion over a leather-like seal. Who should skip it: you do not own a Nintendo console, you need wireless freedom, or you want to repair an existing headset rather than buy a new one.
• Best for repairing what you already own → INF Replacement Earpads Cushions. It is a straight swap for Mpow 071 pads and nothing else.
• Best for a complete gaming setup → Turtle Beach Airlite Fit. Drivers, mic, cable and headband all come in the box.
• Best for long listening comfort with a tight seal → INF Replacement Earpads Cushions. PU leather over thick memory foam is built to hug the ear and block ambient noise.
• Best for breathable, over-ear cushioning → Turtle Beach Airlite Fit. Jersey knit over foam, with an oval over-ear shape.
• Best for voice chat → Turtle Beach Airlite Fit. The bi-directional mic with flip-to-mute has no equivalent on a set of replacement pads.
• Best for cable-free convenience → neither, strictly speaking. The Airlite Fit is wired by design and does not need charging, while the INF pads are not electronics at all.
• Best for Nintendo Switch owners → Turtle Beach Airlite Fit. Officially licensed for Switch 2 and compatible with Switch, Switch Lite and OLED.
• Best for a low-commitment fix → INF Replacement Earpads Cushions. One pair, no tools, seconds to install.
In my opinion, these two barely compete — they solve different problems, and the right answer depends entirely on what you already own. If you have a working Mpow 071 and the pads have gone flat, I would buy the INF Replacement Earpads Cushions. It is the cheaper-feeling decision, the install is trivial, and PU leather over memory foam is exactly the material you want against your ears for hours at a time. If you do not own an Mpow 071, or what you actually need is a headset for Switch gaming and voice chat, I would buy the Turtle Beach Airlite Fit instead. The 40mm drivers, flip-to-mute mic, adjustable 8-ounce frame and official Nintendo licensing make it the complete package, and the knit over-ear cushions are a genuinely different comfort philosophy from the INF pads. My pick for most readers starting from zero: the Airlite Fit. My pick if you are fixing, not buying: the INF pads.
what is on ear headset
An on-ear headset rests against the outer ear rather than surrounding it. The Mpow 071 that the INF Replacement Earpads Cushions are made for is an on-ear model, which is why those pads are shaped as flat cushions instead of deep cups.
what is over ear headset
An over-ear headset has larger cups that enclose the whole ear. The Turtle Beach Airlite Fit uses over-ear, oval ear cushions with jersey knit covers over foam, which is why Turtle Beach describes it as an over-ear fit with added bass and noise isolation.
how to open headset ear
Opening an on-ear headset usually means peeling the cushion away from the earcup lip. The INF pads are designed to be removed and refitted without tools — you take the old pair off, align the new pair with the earcups and snap them into place.
how to wear one ear headset
A single-ear setup means resting one cup against or over one ear and leaving the other side off or pushed back. The Airlite Fit is a two-ear over-ear design with a flip-to-mute mic, so if you want one-ear monitoring you would simply keep one cup angled off your ear and use the left earcup volume wheel.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: MOXKING Joymiso vs HOYULLI 3, VkingMoR Kids Headphones vs SECFOU Retro, Ladont 10 vs Wensdo Kids Headphones Bulk: Cheap Headphones, Linsoul Tripowin x 0DiBi vs KASOTT SoundMaster Pro V1