How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-26 · 7 min read · Independent comparison
• iMangoo USB C Headphones — biggest strength: USB-C plug with a built-in DAC chip and metal-plated connectors, so one pair covers a wide spread of USB-C phones, tablets and laptops instead of locking you to a single brand.
• iMangoo USB C Headphones — biggest trade-off: It's a single pair with a 1.2 m cord, and it will not fit Lightning-only iPhones, so anyone on an older iPhone needs a different connector entirely.
• MITB 2Pack — biggest strength: Two independent Lightning earphones in one package with an MFi-certified chip, giving you a backup pair or a second pair to hand to a family member.
• MITB 2Pack — biggest trade-off: Lightning only. It is explicitly not compatible with Type-C devices, so it's a dead end for iPhone 15 and newer, most recent Android phones, and USB-C tablets.
• Pick iMangoo if your phone, tablet or laptop has a USB-C port and you want one cable that just works.
• Pick MITB 2Pack if you're on an iPhone 14 or older, want two pairs, and don't want to think about adapters.
The iMangoo set is built around one idea: a USB-C plug that behaves like a proper headphone jack. There's a built-in DAC chip inside, which is the piece that actually converts the digital signal your phone sends out of its USB-C port into analog sound. That matters, because a lot of cheap USB-C buds skip it or do it badly, and you end up with buzzing, popping or a volume ceiling that feels broken. iMangoo pairs that chip with metal-plated connectors, a 1.2 m cord, 13 mm dynamic drivers, 32 ohm impedance and a 20 Hz–20 kHz frequency range. On paper that's a normal, sane spec sheet for wired buds — nothing exotic, nothing that should cause trouble.
Who should skip it? Anyone still on a Lightning iPhone. This is a USB-C product; it physically will not plug into an iPhone 14 or older. Also skip it if you specifically want a spare pair lying around — you get one set here, not two. And if you need active noise cancellation, note that the noise control here is sound isolation, which is passive blocking from the bud seal, not ANC. In my opinion, this is the pick for the USB-C era: one pair, broad compatibility, no dongle.
MITB 2Pack: Who It's For
MITB takes the opposite approach. It's a two-pack of Lightning earphones, white, in-ear, with an MFi-certified chip inside. That certification is the real headline: MFi testing means the earbuds communicate properly with Lightning iPhones, so you don't get the "this accessory is not supported" pop-up that plagues uncertified Lightning audio. The compatibility list is long and specific — iPhone 14, 14 Plus, 14 Pro, 14 Pro Max, 13 series, 12 series, 11, 11 Pro Max, SE, XS, XS Max, XR, X, 8, 8 Plus, 7 and 7 Plus. MITB also states plainly that it is not compatible with Type-C devices, which is refreshingly honest labeling.
The second thing you're buying is the number two. Two independent pairs means one lives in your bag and one stays at your desk, or you hand one to a partner, a kid or a coworker on a call. For families with several older iPhones in the house, that's a practical setup rather than a gimmick. The inline remote covers volume, playback and calls, with a press pattern for answering, ending, rejecting, skipping forward and skipping back. The mic is omnidirectional, built for clear voice pickup, and the driver unit is described as high-sensitivity with balanced sound. Impedance is 32 ohm and the driver type is dynamic, matching the iMangoo on those two numbers.
Who should skip it? Anyone with an iPhone 15 or newer, or really anyone on a USB-C phone. There's no adapter path here — it's Lightning or nothing. Also skip it if noise isolation is a priority, because noise control is listed as none, meaning you're relying purely on the in-ear seal. And note the support window: 6-month quality assurance versus iMangoo's 8 months. To me, this is the buy for a household of Lightning iPhones, or for someone who just wants a spare without buying twice.
• Best for modern iPhone (15, 16, 17) → iMangoo USB C Headphones. The MITB set is Lightning-only and won't fit at all.
• Best for older iPhone (14 and earlier) → MITB 2Pack. MFi-certified Lightning is the correct connector, and iMangoo can't plug in.
• Best for cross-device use (phone + tablet + laptop) → iMangoo USB C Headphones. One USB-C cable across iPhone, Galaxy, Pixel and USB-C laptops.
• Best for a spare or sharing → MITB 2Pack. Two pairs in the box versus iMangoo's single set.
• Best for plug-and-play simplicity → MITB 2Pack. The MFi chip removes pairing steps, warnings and Bluetooth entirely.
• Best for call and music controls → a tie. Both have inline remotes with volume, play/pause and call handling; iMangoo adds skip functions, MITB uses multi-press patterns.
• Best for passive noise blocking → iMangoo USB C Headphones. It lists sound isolation; MITB lists noise control as none.
• Best for in-ear fit → MITB 2Pack. It's an in-ear, ear-wrapping design; iMangoo is an on-ear bud shape.
If I'm buying for myself, I'd take the iMangoo USB C Headphones. Almost every phone I'd plug into in 2026 has a USB-C port, the built-in DAC is the part that actually decides whether wired USB-C audio sounds clean or buzzy, and a single pair that covers iPhone, Galaxy and Pixel beats two pairs that only cover Lightning. The case and the longer stated warranty are small but real wins. The exception is obvious and I'll say it plainly: if your household runs on iPhone 14 or older, buy the MITB 2Pack — the MFi chip and the second pair are exactly what you want, and the iMangoo simply won't fit. Either way, check the current price on Amazon before you commit, since wired earbuds move around a lot.
FAQ
how to use headphones for iphone
how to use wired headphones for iphone 15
The iPhone 15 moved to USB-C, so a Lightning-only set like the MITB 2Pack won't fit. Use a USB-C pair such as the iMangoo USB C Headphones, which has a built-in DAC chip for clean digital-to-analog conversion, and just plug it in.
how to use wired headphones for iphone
Match the plug to the port. USB-C iPhone → iMangoo. Lightning iPhone → MITB 2Pack. Then use the inline remote: play/pause, volume, and answer or end calls without touching the screen. If you hear nothing, reseat the plug firmly.
how to use wired headphones for iphone 16
Same story as the iPhone 15 — USB-C port, so go with the iMangoo USB C Headphones. Its metal-plated connector and DAC chip handle the conversion, and the 1.2 m cord gives you normal slack for a pocket, desk or commute.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: iMangoo USB C Headphones vs NUPLEA Open Ear, Stellar Labs Inline Volume Control vs iMangoo USB C Headphones, BINNUNE 2.4GHz vs iMangoo USB C Headphones: Wired Headphones