Setup IJ Start Canon Using IJ.Start.Cannon

It is beneficial to have a printer set up at your home. It will help with your “work from home” tasks and aid you in your other tasks. And, if you are looking to purchase an efficient and high-powered printing device, you should only go for a Canon printer.

If you want help while setting up the Canon printer, you should reach its official website or visit ij.start.canon You can also take references from the following sections.

Steps to Follow Before the Canon Printer Setup Through ij.start.cannon

Before you can commence following the instructions to set up a Canon printer at your workstation through ij.start.canon, you should have the model number of your printer handy.

1. Check basic system specifications. Also, verify that your computer’s hard disk has sufficient space to make up for the printer driver.

2. Before switching on the printer, check the socket and the plug and establish the connection.

3. Otherwise, the printer might go off during the setup process, and you might have to do everything again.

4. Next, check the Wi-Fi, the internet speed, and whether the connection with your system or device is active or not.

5. Visit the website ij.start.canon for further information and driver installation.

How to Setup Canon Printer Hardware via ij.start.canon?

Setting up Canon printer hardware through ij.start.canon requires unboxing your printer and then removing its packaging. You can follow these steps to make it convenient:

1. When you purchase the Canon printer, it gets delivered to you in a sealed box.

2. Unbox the canon printer & take out the necessary components like cartridges and cables along with it.

3. Remove the rest of the packaging, including the polystyrene wraps and protective plastic.

4. Now, locate the power socket in your printing hardware. And then establish an electrical connection.

5. Now, turn on the printer by pressing the power button. You will observe display lights turning on.

6. Now, unpack the cartridges and then slowly put them in the slots by opening the top cover of the printer hardware.

7. Now, place the top cover lid back on, and you will observe that your canon printer will begin to make some sounds.

8. This is an indication that the cartridges have been placed correctly.

9. Place the A-4 sheets or other pages in the paper tray.

10. If you have already performed the initial setup process and need help installing drivers, visit the website: ij.start.canon.

How to Connect a Canon Printer to a Wi-Fi Network? (Using WPS Button Method)

Use these steps to connect a Canon printer to a Wi-Fi networking using the WPS method:

1. Make sure the printer is switched on. Otherwise, turn on the printer.

2. Check the Wireless Fidelity router is turned or turned off. If it is turned off, turn it on.

3. Now, proceed with the WPS push button process.

4. To begin with, go to “Start.” Then, click on the Wi-Fi option.

5. Now, wait out a few moments. Then, you will notice the option of your Wi-Fi network coming up on the screen.

6. Now, look for the symbol of WPS or the title WPS itself on the router. Press and hold.

7. Click on “Ok” on your printer screen.

8. The network connection will be initiated, and you will receive the notification once the printer hardware gets connected to the internet.

9. After this, you can begin installing the printer software from the recommended website ij.start.canon.

How to Download and Install a Canon Printer Driver on Your Computer via ij.start.canon

Use these steps to download and install a Canon printer driver on your computer:

1. Commence the driver installation process by reaching the website ij.start.canon.

2. Notice all the Canon products appearing on the screen. Find your product or otherwise take the help of the search bar window.

3. Click on your printer product.

4. Afterward, you will observe an option called “Driver and Downloads” located at the right-hand side of the screen.

5. Proceed to left-click on the option “Driver and Downloads.”

6. You will discover further options such as ‘Optional Printer Drivers’ and ‘Recommended printer drivers.’

7. You can choose between the two options depending upon the specifications of your operating system.

8. However, it is advisable to always go for ‘Recommended printer drivers.’

9. Now, notice a few download links appearing on your system.

10. Proceed to select the download link.

11. Let the download process start and wait till you observe a pop-up notification on your computer screen that the download process has concluded.

12. Proceed to head towards the “Downloads” folder on your system.

13. It will be there below the desktop icon in the Windows system.

14. Use the hotkeys “Ctrl+J” or “Option-command-L” to open the downloads folder directly.

15. Locate the driver file from the site ij.start.canon.

16. Now, select the file. Find two options: “Run” or “Cancel.”

17. Select the “Run” option to commence the installation process.

18. Grant permission to the User Account Control if you are using Windows 10 operating system.

19. Let the extraction of files happen; it might take a few seconds.

20. Afterward, you will see the setup wizard coming on the screen.

21. Follow the on-screen steps. Start by selecting the region and the preferred language.

22. Click on the “Next” button.

23. You will see a list of existing programs and drivers in your system.

24. You can proceed to add or remove any programs.

25. Read all the points specified in the License Agreement section. Select the “Agree” option to move ahead. Click on “Next.”

26. Let your system process the information and then select the “Next” option to conclude.

How to Connect a Canon Printer to a Windows Computer Using a USB Cable?

You can use these steps to connect your Canon printer to a Windows computer using a USB cable:

1. You should head towards the website ij.start.canon to download and install canon driver files in the commencing step. Complete the installation process successfully.

2. After that, manually connect the printer hardware and the Windows system via a USB cable wire.

3. Launch the “Run” window. Search for the control panel. Otherwise, select “Start” and then find the “Control Panel” option.

4. Afterward, you must tap on the option titled “Devices and Printers.” Remember the fact that you will observe your printer with a green checkmark.

5. You may not be able to see your printer option at all. In that case, you can employ the “Add a printer” option to add the hardware manually.

6. Afterward, wait for a few moments before the hardware gets added to your computer.

7. Thus, your printer will be ready to use. Test the features by printing out a page.

Frequently Asked Questions

Steps to Follow Before the Canon Printer Setup Through ij.start.canon

How to Setup Canon Printer Hardware via ij.start.canon?

How to Connect a Canon Printer to a Wi-Fi Network? (Using WPS Button Method)

How to Download and Install a Canon Printer Driver on Your Computer via ij.start.canon

How to Connect a Canon Printer to a Windows Computer Using a USB Cable?

What is the process to connect a Canon printer to a computing system using a CD?

What is the process to download and install additional software or driver files for the Canon printer?

How to fix the error when my printer gets disconnected from the internet and does not get connected again?