Nayak, Kanhu C., et al. "Synthesis of an aluminum alloy metal matrix composite using powder metallurgy: role of sintering parameters." Applied Sciences 12.17 (2022): 8843.
Kumar Pandey, Ankit, and Prashant P. Date. "Room temperature and high temperature micro-forming analysis of SS304 foil." Materials and Manufacturing Processes (2022): 1-10.
Yadav, Vipin, and Kanhu Nayak. "Finite Element and Experimental Investigation of Multi-stage Deep Drawing of Stainless Steel 304 Sheets at Elevated Temperature." NUMISHEET 2022. Springer, Cham, 2022. 185-195.
Pandey, Ankit K., and Prashant P. Date. "Mechanical and micro-structural characterization of hot rolled brass foil." Materials Characterization 181 (2021): 111515.
Pandey, A. K., B. S. Walunj, and P. P. Date. "Simulation based approach for light weighting of Connecting rod by tube hydro forming process." IOP Conference Series: Materials Science and Engineering. Vol. 1157. No. 1. IOP Publishing, 2021.
Rane, K. K., and P. P. Date. "A dimensional analysis based model to predict completion of solvent debinding step for Metal Injection Moulded parts." Advances in Materials and Processing Technologies 7.2 (2021): 241-261.
Nayak, Kanhu Charan, and Prashant P. Date. "Physical simulation of hot rolling of powder metallurgy-based Al/SiC composite by plane strain multi stage compression." Materials Characterization 173 (2021): 110954.
Date, Prashant P., and Shubham P. Dhonde. "On the design of an air-cooling system of an IC engine block made from sheet metal." IOP Conference Series: Materials Science and Engineering. Vol. 967. No. 1. IOP Publishing, 2020.
Nayak, Kanhu C., and Prashant P. Date. "Experimental Investigation of Multi-stage Deep Drawing of IN718 Sheet at Elevated Temperature." IOP Conference Series: Materials Science and Engineering. Vol. 967. No. 1. IOP Publishing, 2020.
Nayak, Kanhu C., and Prashant P. Date. "Experimental Investigation of Multi-stage Deep Drawing of IN718 Sheet at Elevated Temperature." IOP Conference Series: Materials Science and Engineering. Vol. 967. No. 1. IOP Publishing, 2020.
Aphale, Siddharth, et al. Deformation and Failure Behavior of Cylindrical Lithium-Ion Batteries Subjected to Mechanical Loading. No. 2020-28-0484. SAE Technical Paper, 2020.
Nayak, Kanhu Charan, et al. "Microstructural, physical and mechanical characterization of grinding sludge based aluminium metal matrix composite." Materials Science and Engineering: A 773 (2020): 138895.
Marathe, Pragat P., Kanhu C. Nayak, and Sergei Alexandrov. "Interface Frictional Behaviour of Aluminium and Iron Powder Compacts at Room Temperature." Modeling, Synthesis and Fracture of Advanced Materials for Industrial and Medical Applications. Springer, Cham, 2020. 111-123.
Pandey, Ankit Kumar, et al. "Effect of powder loading and testing condition on the different properties of metal injection molding parts." Materials Today: Proceedings 33 (2020): 5492-5497.
Nayak, Kanhu Charan, Ankit Kumar Pandey, and Prashant P. Date. "Mechanical and physical characterization of powder metallurgy based aluminium metal matrix hybrid composite." Materials Today: Proceedings 33 (2020): 5408-5413.
Nayak, Kanhu Charan, and Prashant P. Date. "Mathematical model for weight fraction of reinforcement addition in a metal matrix through powder metallurgy route." Materials Today: Proceedings 33 (2020): 5368-5372.Date, Prashant P., and Shubham P. Dhonde. "On the design of an air-cooling system of an IC engine block made from sheet metal." IOP Conference Series: Materials Science and Engineering. Vol. 967. No. 1. IOP Publishing, 2020.
Date, Prashant P., and Shubham P. Dhonde. "On the design of an air-cooling system of an IC engine block made from sheet metal." IOP Conference Series: Materials Science and Engineering. Vol. 967. No. 1. IOP Publishing, 2020.
Date, P. P., Pratik Kulkarni, and K. D. Jamadar. "Determining a threshold Strain Nonuniformity Index (SNI) to predict failure in sheet metal components." IOP Conference Series: Materials Science and Engineering. Vol. 651. No. 1. IOP Publishing, 2019.
Nayak, Kanhu Charan. "Development of constitutive relationship for thermomechanical processing of Al-SiC composite eliminating deformation heating." Journal of Materials Engineering and Performance 28.9 (2019): 5323-5343.
Alexandrov, Sergei, et al. "Solution behavior near envelopes of characteristics for certain constitutive equations used in the mechanics of polymers." Materials 12.17 (2019): 2725.
Nayak, Kanhu Charan, and Prashant P. Date. "Hot deformation flow behavior of powder metallurgy based Al-SiC and Al-Al2O3 composite in a single step and two-step uni-axial compression." Materials Characterization 151 (2019): 563-581.
Alexandrov, Sergei. "A general method of stress analysis for a generalized linear yield criterion under plane strain and plane stress." Continuum Mechanics and Thermodynamics 31.3 (2019): 841-849.
Mishra, Sumeet, and K. Narasimhan. "Deciphering the deformation mechanism in single point incremental forming: experimental and numerical investigation." The International Journal of Advanced Manufacturing Technology 101.9 (2019): 2355-2366.
Rane, Kedarnath, and Prashant Date. "Evolution of properties of parts during MIM and sintering of recycled oxide particles." Powder Metallurgy 62.2 (2019): 133-145.
Pandey, Ankit Kumar, et al. "Sustainable manufacturing process for recycling of aluminum alloy waste into direct product by high-pressure torsion process." Materials Today: Proceedings 18 (2019): 3099-3108.
Rane, Kedarnath, and Prashant P. Date. "Recycling Potential for Finely Divided Ferrous Metallic Scrap Using Powder Technology." Recycling 3.4 (2018): 59.
Rane, Kedarnath, and Prashant Date. "Recycling-Cum-Manufacturing Process for Utilization of Finely Divided Ferrous Metallic Scrap. Preprint (2018).
Alexandrov, Sergei. "An alternative interpretation of axial friction test results for viscoplastic materials." Mechanics of Time-Dependent Materials 22.2 (2018): 259-271.
Lyamina, E. A., N. V. Kalenova, and P. P. Date. "A stationary bulk planar ideal flow solution for the double shearing model." Journal of Physics: Conference Series. Vol. 991. No. 1. IOP Publishing, 2018.
Jadhav, S., P. Date, and R. Singh. "Effect of Ni to Cu Ratio on Formation of Oxide Scale at High Temperature." J Nanosci Nanotechnol Res 2.1 (2018): 3.
Alexandrov, Sergei, Elena Lyamina, and Prashant Date. "A Method of Calculating Principal Stress Trajectories in Powder and Porous Materials Obeying a Piece-wise Linear Yield Criterion." MATEC Web of Conferences. Vol. 220. EDP Sciences, 2018.
Nayak, Kanhu Charan, and Prashant P. Date. "Manufacturing of light automobile engine piston head using sheet metal." Procedia Manufacturing 15 (2018): 940-948.
Pandey, Ankit Kumar, Bhushan S. Walunj, and Prashant P. Date. "Simulation based approach for light weighting of transmission components using tube hydroforming." Procedia Manufacturing 15 (2018): 915-922.
Alexandrov, S., A. Pirumov, and P. P. Date. "Existence of Nonsteady Planar Ideal Flows in Anisotropic Plasticity." IOP Conference Series: Materials Science and Engineering. Vol. 272. No. 1. IOP Publishing, 2017.
Patil, Sachin, et al. "Effect of laser shock peening (Lsp) on AISI L6 hot work tool steel." Processing, Properties, and Design of Advanced Ceramics and Composites II 261 (2017): 267.
Date, P. P., R. N. Kasture, and A. S. Kore. "On the lightweighting of automobile engine components: forming sheet metal connecting rod." Journal of Physics: Conference Series. Vol. 896. No. 1. IOP Publishing, 2017.
Kore, A. S., K. C. Nayak, and P. P. Date. "Formability of aluminium sheets manufactured by solid state recycling." Journal of Physics: Conference Series. Vol. 896. No. 1. IOP Publishing, 2017.
Rane, K. K. "Sustainable recycling of ferrous metallic scrap using powder metallurgy process." Journal of Sustainable Metallurgy 3.2 (2017): 251-264.
Inamdar, Sanket, et al. "Life prediction of l6 steel using strain-life curve and cyclic stress-strain curve by means of low cycle fatigue testing." IOP Conference Series: Materials Science and Engineering. Vol. 201. No. 1. IOP Publishing, 2017.
Inamdar, Sanket, et al. Exploration and Analysis of Strain Softening Phenomena of L6 Steel. No. 2017-01-0350. SAE Technical Paper, 2017.
Lomate, Dattaprasad, et al. Fatigue Life Prediction of Induction Hardened Case Depth Specimens Made From 38MnVS6 Micro Alloyed Steel. No. 2017-01-0357. SAE Technical Paper, 2017.
Bhavar, Valmik, et al. "Influence of shot peening on DIN 1.2714 hot work tool steel." Journal of Materials Science and Chemical Engineering 5.1 (2017): 81-90.
Alexandrov, Sergei, and Prashant Date. "Plane strain bending under tension as an ideal flow process in pressure–dependent plasticity." MATEC Web of Conferences. Vol. 108. EDP Sciences, 2017.
Alexandrov, Sergei, and Prashant Date. "Functional Materials and Performance Testing." MATEC Web of Conferences. Vol. 108. EDP Sciences, 2017.
Dhumal, D. A., P. P. Date, and V. M. Nandedkar. "Effect of Different Process Parameters for Drawn Sheet Metal Components on the Global Strain Non-Uniformity Index (GSNI)." Strain 1.1.48 (2016): 2-236.
Dhumal, D. A., et al. "Experimental Verification of the Strain Non-Uniformity Index (SNI) based Failure Prediction." Journal of Physics: Conference Series. Vol. 734. No. 3. IOP Publishing, 2016.
Jadhav, Sandip, Ratneshwar Tekale, and Prashant P. Date. "Analysis of Strain Non-uniformity Index (SNI) for DifferentGeometries of Drawn Sheet Metal Parts." Journal of Physics: Conference Series. Vol. 734. No. 3. IOP Publishing, 2016.
Date, P. P., and K. D. Jamadar. "Application of Strain non-uniformity index (SNI) based approach to predict failure in sheet metal components." Journal of Physics: Conference Series. Vol. 734. No. 3. IOP Publishing, 2016.
Lyamina, Elena A., and Prashant P. Date. "Planar plastic flow of polymers near very rough walls." Structural Engineering and Mechanics, An Int'l Journal 58.4 (2016): 707-718.
Powar, Amit, and Prashant Date. "Modeling of microstructure and mechanical properties of heat treated components by using Artificial Neural Network." Materials Science and Engineering: A 628 (2015): 89-97.
Rane, K. K., and P. P. Date. "Reduction and densification characteristics of iron oxide metallic waste during solid state recycling." Advanced Powder Technology 26.1 (2015): 126-138.
Salunke, S. K. "Analysis of Strain Nonuniformity Index (SNI) in electrohydraulically formed sheet metal component." (2014).
Date, Prashant P. "Effect of mesh size on calculation of strain non-uniformity index in drawn sheet metal parts." Procedia Engineering 81 (2014): 945-950.
Kharabe, Sangmeshwar M., et al. An Evaluation of Crankshaft Bending Rigidity Using Finite Element Analysis. No. 2013-01-0126. SAE Technical Paper, 2013.2019
Milind, T. R., and P. P. Date. "Analytical and finite element modeling of strain generated in equal channel angular extrusion." International Journal of Mechanical Sciences 56.1 (2012): 26-34.
Singhal, M., and P. P. Date. "Study on the Formability & Shape Conformity of Mg & Al-alloy sheets in Warm condition by Electromagnetic Forming." 5th International Conference on High Speed Forming. 2012.
Gawade, Shyam, P. P. Date, and S. B. Sharma. "On The Simulation of Electromagnetic Forming Process of Tube Using Multiphysics Software." Excerpt from the Proceedings of the COMSOL Conference. 2011.
Padhye, R. S., T. R. Milind, and P. P. Date. "Texture and grain refinement in equal channel angular pressing using round corner dies." AIP Conference Proceedings. Vol. 1315. No. 1. American Institute of Physics, 2011.
Kore, Sachin D., et al. "Application of electromagnetic impact technique for welding copper-to-stainless steel sheets." The International Journal of Advanced Manufacturing Technology 54.9 (2011): 949-955.
Varma, Navneet, Manoj Ukhande, and P. P. Date. "On The Experimental Verification Of The Numerical Simulation Based Inferences From Strain Distribution In Axisymmetric Drawn Sheet Metal Parts." AIP Conference Proceedings. Vol. 1383. No. 1. American Institute of Physics, 2011
Kore, Sachin Dnyandeo, et al. "Electromagnetic impact welding of copper-to-copper sheets." International journal of material forming 3.2 (2010): 117-121.
Kore, S. D., et al. "Electromagnetic impact welding of Al-to-Al–Li sheets." Journal of manufacturing science and engineering 131.3 (2009).
Date, P. P. "On the inferences from the analyses of strain distributions in drawn sheet metal products." International Journal of Materials and Product Technology 32.4 (2008): 346-362.
Kore, S. D., P. P. Date, and S. V. Kulkarni. "Electromagnetic impact welding of aluminum to stainless steel sheets." Journal of materials processing technology 208.1-3 (2008): 486-493.
Kore, S. DATE, P. P. Date, and S. V. Kulkarni. "Effect of process parameters on electromagnetic impact welding of aluminum sheets." International journal of impact engineering 34.8 (2007): 1327-1341.
Desai, Sharvari G., and P. P. Date. "On the quantification of strain distribution in drawn sheet metal products." Journal of materials processing technology 177.1-3 (2006): 439-443.
Kamalapurkar, R. L., and P. P. Date. "Minimizing wastage of sheet metal for economical manufacturing." Journal of materials processing technology 177.1-3 (2006): 81-83.
Date, P. P. "Sheet metal formability." Proceedings of the training program of sheet metal forming research association at Indian Institute of Technology, Mumbai (2005).
Desai, Sharvari G., R. H. Pardeshi, and P. P. Date. "Study of various initial blank shapes to minimize the earing in the different shaped formed parts using finite element analysis." AIP Conference Proceedings. Vol. 778. No. 1. American Institute of Physics, 2005.
Thakkar, Manish, and P. P. Date. "Simulation based control of weld line movement in tailor welded blanks." AIP Conference Proceedings. Vol. 778. No. 1. American Institute of Physics, 2005.
Bairwa, M. L., and Sharvari G. Desai. "Identification of heat treatments for better formability in an aluminum-lithium alloy sheet." Journal of materials engineering and performance 14.5 (2005): 623-633.
Desai, Sharvari, and P. P. Date. "ON THE STUDY OF THE INTERACTION BETWEEN MATERIAL PROPERTIES AND PRODUCT GEOMETRY AND THEIR EFFECT ON THE STRAIN DISTRIBUTION IN DEEP DRAWN PRODUCTS." Transactions of the Indian Institute of Metals 58.5 (2005).
Desai, Sharvari G., and P. P. Date. "ON THE DEFINITION OF THE CONSTRAINT FACTOR IN QUANTITATIVE CHARACTERISATION OF THE STRAIN DISTRIBUTION IN DRAWN SHEET METAL PRODUCTS." Transactions of the Indian Institute of Metals 58.5 (2005).
Yerra, S. K., et al. "Effect of strain path and the magnitude of prestrain on the formability of a low carbon steel: On the textural and microtextural developments." J. Eng. Mater. Technol. 126.1 (2004): 53-61.
Jaisingh, Amit, et al. "Sensitivity analysis of a deep drawing process for miniaturized products." Journal of materials processing technology 147.3 (2004): 321-327.
Singh, U. P., et al. "Numerical simulation of the influence of air bending tool geometry on product quality." Journal of materials processing technology 145.3 (2004): 269-275.
Jaisingh, Amit, et al. "Sensitivity analysis of a deep drawing process for miniaturized products." Journal of materials processing technology 147.3 (2004): 321-327.
Vij, Sunil, and P. P. Date. "Studies Of Variation Of Springback With Curved Line Of Bend And Variable Blankholder Forces." AIP Conference Proceedings. Vol. 712. No. 1. American Institute of Physics, 2004.
Bairwa, M. L., and P. P. Date. "Effect of heat treatment on the tensile properties of Al–Li alloys." Journal of materials processing technology 153 (2004): 603-607.
Vankudre, H. V., and P. P. Date. "Evaluation of the Mean Plastic Strain Ratio r m of Metallic Sheets Prestrained Along Different Biaxial Strain Paths." Journal of testing and evaluation 31.4 (2003): 321-329.
Desai, S. G., and P. P. Date. "Effect of blank size on thickness distribution and punch load in deep drawing of multi-stage non-axisymmetric part using finite element simulation." Transactions of the Indian Institute of Metals 56.5 (2003).
Vij, S., and P. P. Date. "Variation of springback over curved line of bend." Transactions of the Indian Institute of Metals 56.5 (2003).
Suneel, T. S., S. S. Pande, and P. P. Date. "A technical note on integrated product quality model using artificial neural networks." Journal of Materials Processing Technology 121.1 (2002): 77-86.
Inamdar, M. V., P. P. Date, and S. V. Sabnis. "On the effects of geometric parameters on springback in sheets of five materials subjected to air vee bending." Journal of Materials Processing Technology 123.3 (2002): 459-463.
Vankudre, H. V., et al. "Effect of in-plane biaxial strain paths on the variation of normal anisotropy and texture of steel sheet." Journal of materials processing technology 125 (2002): 756-763.
Date, P. P., and K. A. Padmanabhan. "Deformation behaviour of sheets of three aerospace Al-alloys." Journal of Materials Processing Technology 112.1 (2001): 68-77.
Date, P. P., and K. A. Padmanabhan. "Comparison of fracture in sheets of low pressure gas (LPG) steel and aluminium alloys." Journal of Materials Processing Technology 114.2 (2001): 122-128.
Inamdar, M., et al. "Development of an artificial neural network to predict springback in air vee bending." The International Journal of Advanced Manufacturing Technology 16.5 (2000): 376-381.
Pilani, R., et al. "A hybrid intelligent systems approach for die design in sheet metal forming." The International Journal of Advanced Manufacturing Technology 16.5 (2000): 370-375.
Maiti, S. K., et al. "Assessment of influence of some process parameters on sheet metal blanking." Journal of Materials Processing Technology 102.1-3 (2000): 249-256.
Inamdar, M. V., P. P. Date, and U. B. Desai. "Studies on the prediction of springback in air vee bending of metallic sheets using an artificial neural network." Journal of Materials Processing Technology 108.1 (2000): 45-54.
Date, P. P., et al. "On the prediction of spring back in vee bending of metallic sheets under plane strain condition." International conference on sheet metal, Earlangen, Germany. 1999.
Padmanabhan, K. A. "Deformation behaviour of hot rolled low carbon steel sheets: the effects of sheet thickness and modes of testing on formability." Journal of materials science letters 13.11 (1994): 795-798.
Kumar, Sujit, P. P. Date, and K. Narasimhan. "A new criterion to predict necking failure under biaxial stretching." Journal of Materials Processing Technology 45.1-4 (1994): 583-588.
Date, P. P., and K. A. Padmanabhan. "On the deformation and fracture behaviour of low-pressure gas (LPG) grade steel and two aluminium alloys." Journal of materials processing technology 39.1-2 (1993): 153-164.
Date, P. P., and K. A. Padmanabhan. "On the prediction of the forming-limit diagram of sheet metals." International journal of mechanical sciences 34.5 (1992): 363-374.
Date, P. P., and K. A. Padmanabhan. "On the formability of 3.15 mm thick low-carbon steel sheets." Journal of materials processing technology 35.2 (1992): 165-181.