Publication

Journal

Journal | Conference | Patent

International

108. Performance Assessment of Limestone-reinforced Calcium Aluminate Cement in Binder Jetting 3D Printing: Mechanical Properties, Microstructure, and Hydration, Cement and Concrete Composites, 2025 (SCI(E)-(Q1))

TBD

107. Synergistic effect of alkanolamines and nano-SiO2 on hydration and mechanical properties of Portland limestone cement, Construction and Building Materials, 2025 (SCI(E)-(Q1))

TBD

106. Comparative effects of CO2-curing on the microstructure formation and the mechanical responses of C3S: Insights from atomic, crystallographic, and macroscopic deformations, Journal of Building Engineering, 2025 (SCI(E)-(Q1))

TBD

105. Removal of free lime from thermally activated recycled cement powder using phosphoric acid modification, Construction and Building Materials, 2025 (SCI(E)-(Q1))

TBD

104. RH-based sensitivity modeling and performance classification framework for internally cured waste glass beads mortars, Construction and Building Materials, 2025 (SCI(E)-(Q1))

https://doi.org/10.1016/j.conbuildmat.2025.144426

103. Interfacial Reinforcement Behavior of Lightweight Aggregates–Binder Matrix in High-Strength Mortars Incorporating Carbon Nanotubes, Journal of Building Engineering, 2025 (SCI(E)-Q1))

https://doi.org/10.1016/j.jobe.2025.113848

102. Enhancing sustainability and mechanical properties of ultra-high-performance concrete through CO2 uptake, Construction and Building Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2025.142272

101. Analysis of Fire-Resistance Improvement Mechanism in Low-Lime Calcium Silicate Cement Paste through Nanoscale Pore-Structure Analysis via Synchrotron X-ray Nanoimaging, Construction and Building Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2025.141184

100. Immobilization and Leaching Behavior of Cobalt in Alkali-Activated Fly Ash/Dehydrated Cement Paste Fine Blends, Cement and Concrete Research, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2025.107921

99.Synthesis and Characterization of MgO- and SrO-Doped Cement: Mineralogical Composition and Polymorphism of Cement Clinker Phases, Construction and Building Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2025.141994

98. Synergistic effects of nano-alumina and triisopropanolamine in Portland limestone cements with various sulfate levels, Cement and Concrete Composites, 2025 (SCI(E)-(Q1))

https://doi.org/10.1016/j.cemconcomp.2025.105994

97. Repetitive Water Replenishment in CO2 Curing: Enhancement in Reactivity, Carbon Uptake, Crystal Development, and Mechanical Properties of Low Calcium Binder Composites, Cement and Concrete Composites, 2025 (SCI(E)-(Q1))

https://doi.org/10.1016/j.cemconcomp.2025.106053

96. Analysis of Fire-Resistance Improvement Mechanism in Low-Lime Calcium Silicate Cement Paste through Nanoscale Pore-Structure Analysis via Synchrotron X-ray Nanoimaging, Construction and Building Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2025.141184

95. Exploring the impact of copper slag on the physicochemical properties of Portland limestone cement (PLC), Journal of Building Engineering, 2025 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2025.111964

94. Comparative Effects of Graphene Oxide on the Interfacial Transition Zone in Silica Fume-Modified Cement Mortar at Varying Water-to-Binder Ratios, Case Studies in Construction Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cscm.2025.e04230

93. Multi-Scale Synchrotron X-ray Scattering Studies on Thermo-Induced Changes in Structural and Mechanical Properties of CSH/PCE Composites, Construction and Building Materials, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.139742

92. A Novel Strategy Utilizing Graphene Oxide/Functionalized Carbon Nanotube/Nanosilica Sheet for Nanomaterial Incorporation in Cement Paste: Analysis of the Impact on Mechanical Properties and Porosity Analyzed through Synchrotron X-ray Nanoimaging, Cement and Concrete Composites, 2025 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2024.105918

91. High-alumina cementitious materials for binder jetting 3D printing: Optimizing mixing ratio and curing solution for mechanical properties and hydration, Journal of Building Engineering, 2025 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2024.111598

90. Effect of particle size distribution and content of limestone powder on compressive response of high-early-strength cement mortars, Journal of Building Engineering, 2024 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2024.110964

89. Comprehending the role played by graphene nanoribbons in modulating the conductivity and self-sensing properties of cementitious composites, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.138905

88. Benefits of CaCO3 nanoparticles for the strain hardening behavior of high-strength alkali-activated composites based on blast furnace slag and liquid crystal display glass powder, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.138314

87. A Mechanism Study of Thermal Resistance and Post-Fire Strength Recovery in Cement Paste with Carbon Nanotubes and Nanosilica via Focused Ion Beam/Scanning Electron Microscopy Tomography, Journal of Building Engineering, 2024 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2024.110750

86. Enhanced reactivity and CO2 mineralization of low-lime calcium silicate cement by incorporating nitric acid as an initial calcium leaching agent, Journal of CO2 Utilization, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.jcou.2024.102913

85. Performance of Self-healing Cementitious Mortar with PVA Fiber and SAP, International Journal of Concrete Structures and Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1186/s40069-024-00692-x

84. Quantitative Characterization of Nano-Scale Pore Structures in a Consistent Volume of Cement Paste subjected to Heating via Synchrotron X-ray Nanoimaging, Cement and Concrete Research, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2024.107630

83. Sustainable design of low-CO2 hybrid concrete incorporating calcined clay and limestone powder , Journal of Building Engineering, 2024 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2024.109798

82. Evaluation of the thermal stability of metakaolin-based geopolymers according to Si/Al ratio and sodium activator, Cement and Concrete Composites, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2024.105562

81. A state-of-the-art review on recent advances in the fabrication and characteristics of magnesium-based alloys in biomedical applications, Journal of Magnesium and Alloys, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.jma.2024.06.015

80. Impacts of graphene nanoribbon dispersion and stability on the mechanical and hydration properties of cement paste: Insights from surfactant-assisted ultrasonication, Journal of Building Engineering, 2024 (SCI(E)-Q1))

https://doi.org/10.1016/j.jobe.2024.110469

79. Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.135892

78. Graphene nanoribbons: a novel additive for enhancing the fire resistance of cementitious composites, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.136057

77. Influences of alumina type and sulfate content on hydration and physicochemical changes in Portland–limestone cement, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.135989

76. Investigation of the hydrate formation and mechanical performance of limestone calcined clay cement paste incorporating nano-CaCO3 and nano-SiO2 as partial limestone substitutes, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.135335

75. Exploring the potential of pulverized oyster shell as a limestone substitute in limestone calcined clay cement (LC3) and its implications for performance, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2024.135918

74. Anodization and nonstructural surface characterizations of fabricated Ti–29Nb–13Ta–7.1Zr alloy for biomedical applications and its mechanical, wettability, tribological, and corrosion properties, Materials Chemistry and Physics, 2024 (SCI-(Q1))

DOI: https://doi.org/10.1016/j.matchemphys.2023.128825

73. Impact of interatomic structural characteristics of aluminosilicate hydrate on the mechanical properties of metakaolin-based geopolymer, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.134529

72. Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment, Construction and Building Materials, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.134248

71. Characterization of Thermal Resistance and Mechanical Strength Recovery of Carbon-nanotube-incorporated Portland Cement Composites subjected to Heating and Rehydration: Visualization of Pore Structural Evolutions via Synchrotron 3D X-ray Nanoimaging, Cement and Concrete Composites, 2024 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2023.105361

70. Characteristic microstructural phase evolution and the compressive strength development mechanisms of tricalcium silicate pastes under various initial carbonation curing environments, Construction and Building Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.133866

69. Influence of Multi-scale Three-dimensional Pore Characteristics on the Mechanical Properties of Graphene Oxide and Carbon Nanotube incorporated Cementitious Composites, Cement and Concrete Research, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2023.107326

68. Graphene nanoribbons as a novel nanofiller for enhancing the mechanical and electrical properties of cementitious composites, Construction and Building Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.133273

67. Comparative Analysis of the Synergistic Effects of Hybrid Nanomaterial Reinforcement in Cementitious Composites: a Perspective for Pore Refinement and Thermal Resistance, Construction and Building Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.132856

66. Quantitative characterization of the interfacial transition zone around lightweight and normal aggregates in cement mortars at different water-to-binder ratios, Construction and Building Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2023.132584

65. Comprehensive analysis of CNT/NS/GO composites: Dispersion effect of graphene oxide for environmental sensor application, Composites Part A: Applied Science and Manufacturing, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.compositesa.2023.107639

64. Effect of Nanomaterials (Carbon Nanotubes, Nano-silica, Graphene Oxide) on Bond Behavior Between Concrete and Reinforcing Bars, Case Studies in Construction Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cscm.2023.e02206

63. Flexible wearable self-supporting hybrid supercapacitor device based on hierarchical Nickel–Cobalt Sulfide@C electrode, Scientific Reports, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1038/s41598-023-42278-9

62. Systematic microstructure modification effect on nanomechanical, tribology, corrosion, and biomineralization behavior by optimized anodic alumina nanotubes coated Ti-6Al-4V, Ceramics International, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.ceramint.2023.04.176

61. Evaluation of the mechanical and photocatalytic properties of TiO2-reinforced cement-based materials in binder jet 3D printing, Journal of Building Engineering, 2023 (SCI(E)-Q1))

https://doi.org/10.1016/j.jobe.2023.106618

60. Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled nuclear power plants, Construction and Building Materials, 2023 (SCI(E)-(Q1))

https://doi.org/10.1016/j.conbuildmat.2023.130878

59. Insight on the mechanical properties of hierarchical porous calcium–silicate–hydrate pastes according to the Ca/Si molar ratio using in-situ synchrotron X-ray scattering and nanoindentation test, Construction and Building Materials, 2023 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2022.130034

58. Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution, Case Studies in Construction Materials, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cscm.2022.e01603

57. Micromechanical properties of hydroxyapatite nanocomposites reinforced with CNTs and ZrO2, Ceramics International, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.ceramint.2022.10.218

56. Synergistic strengthening mechanism of Portland cement paste reinforced by a triple hybrid of graphene oxide, functionalized carbon nanotube, and nano-silica, Construction and Building Materials, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2022.129017

55. Sustainability enhancement of calcined clay and limestone powder hybrid ultra-high-performance concrete using belite-rich Portland cement, Construction and Building Materials, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2022.128932

54. Understanding the role of graphene oxide nanoribbons–functionalized carbon nanotubes–graphene oxide (GNFG) complex in enhancing the fire resistance of cementitious composites, Construction and Building Materials, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2022.128637

53. Effect of magnesium silicate hydrate (M-S-H) formation on the local atomic arrangements and mechanical properties of calcium silicate hydrate (C-S-H): In situ X-ray scattering study, Cement and Concrete Research, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2022.106869

52. Flexural Retrofit of Existing Reinforced Concrete Structural Walls with Various Boundary Element Details under Cyclic Loading, Journal of Building Engineering, 2022 (SCI(E)-Q1))

DOI: https://doi.org/10.1016/j.jobe.2022.104468

51. Synthesis, Characterization of Polyethylene/B4C Composite, and its Neutron Shielding Performance in Cementitious Materials: Experimental and Simulation Studies, Cement and Concrete Composites, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2022.104458

50. One-Step Fabrication of Superhydrophobic Surfaces with Wettability Gradient Using Three-Dimensional Printing, International Journal of Precision Engineering and Manufacturing-Green Technology, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1007/s40684-022-00418-y

49. Feasibility Study on Utilization of Pulverized Eggshell Waste as an Alternative to Limestone in Raw Materials for Portland Cement Clinker Production, Construction and Building Materials, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2022.126589

48. Instant Mechanical Recovery of Heat-damaged Nanosilica-incorporated Cement Composites under Various Rehydrations Procedures, Materials and Structures, 2022 (SCI(E)-(Q1))

DOI: https://doi.org/10.1617/s11527-021-01847-y

47. Effect of Zirconia Nanotube Coating on the Hydrophilicity and Mechanochemical Behavior of Zirconium for Biomedical Applications, Surfaces and Interfaces, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.surfin.2021.101623

46. Effect of waste ceramic powder on the properties of alkali-activated slag and fly ash pastes exposed to high temperature, Polymers, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/polym13213797

45. Synthesis of highly-dispersed graphene oxide nanoribbons-functionalized carbon nanotubes-graphene oxide (GNFG) complex and its application in enhancing the mechanical properties of cementitious composites, Nanomaterials, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/nano11071669

44. Temperature effects on local structure, phase transformation, and mechanical properties of calcium silicate hydrates, Journal of the American Ceramic Society, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1111/jace.17881

43. Networking human biomarker and hazardous chemical elements from building materials: Systematic literature review and in vivo test, Building and Environment, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.buildenv.2021.107603

42. Synergistic Effect of Carbon Nanotube/TiO2 Nanotube Multi-Scale Reinforcement on the Mechanical Properties and Hydration Process of Portland Cement Paste, Construction and Building Materials, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2021.123447

41. Tribo-mechanical Properties Evaluation of HA/TiO2/CNT Nanocomposite, Scientific Reports, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1038/s41598-021-81187-7

40. Evaluation of orientation and distribution of steel fibers in high-performance concrete column determined via micro-computed tomography, Construction and Building Materials, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2020.121473

39. Effects of Titanium and Carbon Nanotubes on Nano/Micromechanical Properties of HA/TNT/CNT Nanocomposites, Applied Surface Science, 2021 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.apsusc.2020.148123

38. Photocatalytic Performance Evaluation of Titanium Dioxide Nanotube Reinforced Cement paste, Materials, 2020 (SCI(E)-(Q2))

DOI: https://doi.org/10.3390/ma13235423

37. Supercapacitor performance of porous nickel cobaltite nanosheets, Scientific Reports, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1038/s41598-020-75946-1

36. Synthesis and Characterization of Cement Clinker Using Recycled Pulverized Oyster and Scallop Shell as Limestone Substitutes, Journal of the Cleaner Production, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.jclepro.2020.123987

35. Determination of Atomistic Deformation of Tricalcium Silicate Paste with High-Volume Fly Ash, Journal of the American Ceramic Society, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1111/jace.17404

34.Synthesis and Characterization of a NiCo2O4@ NiCo2O4 Hierarchical Mesoporous Nanoflake Electrode for Supercapacitor Applications, Nanomaterials, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/nano10071292

33. Application of micro-CT to Mori-Tanaka method for non-randomly oriented pores of air-entrained cement paste, Construction and Building Materials, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2020.119342

32. Prediction of Binding Stability of Pu(IV) and PuO2(VI) by Nitrogen Tridentate Ligands in Aqueous Solution, International Journal of Molecular Sciences, 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/ijms21082791

31. Supercapacitor performance of nickel-cobalt sulfide nanotubes decorated using Ni Co-layered double hydroxide nanosheets grown in situ on Ni foam, Nanomaterials. 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/nano10030584

30. Pressure-induced anomalous behavior of thaumasite crystal, Journal of the American Ceramic Society. 2020 (SCI-(Q1))

DOI: https://doi.org/10.1111/jace.17035

29. Detection of hydrolyzed plutonium chloride compounds generated by moisture intrusion of pyroprocessing hot cell using density functional theory, Journal of Radioanalytical and Nuclear Chemistry. 2020 (SCI-(Q2))

DOI: https://doi.org/10.1007/s10967-020-07211-8

28. Analysis of atomistic structural deformation characteristics of calcium silicate hydrate in 53-year-old tricalcium silicate paste using atomic pair distribution function, Construction and Building Materials. 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2019.117714

27. Influences of Rehydration Conditions on the Mechanical and Atomic Structural Recovery Characteristics of Portland Cement Paste Exposed to Elevated Temperatures, Construction and Building Materials. 2020 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2019.117453

26. Experimental and theoretical study on elastic properties of crystalline alkali silicate hydrate, Materials & Design. 2019 (SCI(E)-(Q1)

DOI: https://doi.org/10.1016/j.matdes.2019.108240

25. Fire Spread of Thermal Insulation Materials in the Ceiling of Piloti-type Structure: Comparison of Numerical Simulation and Experimental Fire Tests Using Small- and Real-scale Models, Sustainability, 2019 (SCI(E)-(Q3))

DOI: https://doi.org/10.3390/su11123389

24. Characterization of Titanium Nanotube Reinforced Cementitious Composites; Mechanical Properties, Microstructures, and Hydration Kinetics, Materials, 2019 (SCI(E)-(Q2))

DOI: https://doi.org/10.3390/ma12101617

23. Properties Investigation of GO/HA/Pt Composite Thin Film, BioMed Research International, 2019 (SCI(E)-(Q3))

DOI: https://doi.org/10.1155/2019/4847932

22. Assessment of Neutron Shielding Performance of Nano-TiO2-Incorporated Cement Paste by Monte Carlo Simulation, Progress in Nuclear Energy, 2019 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.pnucene.2019.103043

21. Mechanical Degradation and Thermal Decomposition of Ethylene-Vinyl Acetate (EVA) Polymer-Modified Cement Mortar (PCM) Exposed to High-Temperature, Sustainability, 2019 (SCI(E)-(Q3))

DOI: https://doi.org/10.3390/su11020500

20. Electrodeposited nickel aluminum-layered double hydroxide on Co3O4 as binder-free electrode for supercapacitor, Journal of Materials Science: Materials in Electronics, 2019 (SCI(E)-(Q2))

DOI: https://doi.org/10.1007/s10854-018-0515-x

19. Tribo-Mechanical Properties and Corrosion Behavior Investigation of Anodized Ti–V alloy, Coatings, 2018 (SCI(E)-(Q2))

DOI: https://doi.org/10.3390/coatings8120459

18. A study of thermal decomposition of phases in cementitious systems using HT-XRD and TG, Construction and Building Materials, 2018 (SCI(E)-(Q1))

DOI: https://doi.org/10.1016/j.conbuildmat.2018.03.001

17. DFT study on the bonding properties of Pu(III) and Pu(IV) chloro complexes, Journal of Nuclear Science and Technology, 2018 (SCI-(Q1))

DOI: https://doi.org/10.1080/00223131.2017.1412365

16. Pair distribution function analysis of nanostructural deformation of calcium silicate hydrate under compressive stress, Journal of the American Ceramic Society, 2018 (SCI-(Q1))

DOI: https://doi.org/10.1111/jace.15185

15. Removal of Hexavalent Chromium in Portland Cement Using Ground Granulated Blast-Furnace Slag Powder, Materials, 2017 (SCI(E)-(Q1))

DOI: https://doi.org/10.3390/ma11010011

14. Synthesis and characterization of cobalt hydroxide carbonate nanostructures, RSC Advances, 2017 (SCI(E)-(Q1))

DOI: http://dx.doi.org/10.1039/c7ra09050a

13. Synthesis, characterization, and properties of nickel-cobalt layered double hydroxide nanostructures, RSC Advances, 2017 (SCI(E)-(Q1))

DOI: http://dx.doi.org/10.1039/c7ra06670h

12. Effects of Incorporating High-Volume Fly Ash into Tricalcium Silicate on the Degree of Silicate Polymerization and Aluminum Substitution for Silicon in Calcium Silicate Hydrate, Materials, 2017 (SCI(E)- (Q1))

DOI: https://doi.org/10.3390/ma10020131

11. In Situ Soft X-ray Spectromicroscopy of Early Tricalcium Silicate Hydration, Materials, 2016 (SCI(E)- (Q1))

DOI: https://doi.org/10.3390/ma9120976

10. Nanostructural Deformation Analysis of Calcium Silicate Hydrate in Portland Cement Paste by Atomic Pair Distribution Function, Advances in Materials Science and Engineering, 2016 (SCI(E)-(Q3))

DOI: https://doi.org/10.1155/2016/8936084

9. Atomic and nano-scale characterization of a 50-year-old hydrated C3S paste, Cement and Concrete Research, 2015. (SCI-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2015.06.010

8. CaCl2-Accelerated Hydration of Tricalcium Silicate: A STXM Study Combined with 29Si MAS NMR, Journal of Nanomaterials, 2015 (SCI(E)-(Q2))

DOI: https://doi.org/10.1155/2015/215371

7. Soft X-ray Ptychographic Imaging and Morphological Quantification of Calcium Silicate Hydrates (C-S-H)., Journal of American Ceramic Society, 2015. (SCI-(Q1)) (The best paper on cements published in the Journal of the American Ceramic Society)

DOI: https://doi.org/10.1111/jace.13808

6. Soft X-ray Spectromicroscopic Investigation of Synthetic C-S-H and C3S hydration products, Journal of American Ceramic Society, 2015. (SCI-(Q1))

DOI: https://doi.org/10.1111/jace.13709

5. Characterization of natural pozzolan-based geopolymeric binders, Cement and Concrete Composites, 2014 (SCI-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2014.06.010

4. Characterization of morphology and hydration products of high-volume fly ash paste by monochromatic scanning x-ray micro-diffraction (µ-SXRD), Cement and Concrete Research, 2014. (SCI-(Q1))

DOI: https://doi.org/10.1016/j.cemconres.2014.03.001

3. Multiscale characterization of the chemical-mechanical interactions between polymer fibers and cementitious matrix, Cement and Concrete Composites, 2014 (SCI-(Q1))

DOI: https://doi.org/10.1016/j.cemconcomp.2014.01.001

2. Chloride Adsorption by Calcined Layered Double Hydroxides in Hardened Portland cement Paste, Materials Chemistry and Physics, 2014 (SCI-(Q1))

DOI: https://doi.org/10.1016/j.matchemphys.2014.02.026

1. Advanced Nanoscale Characterization of Cement Based Materials Using X-Ray Synchrotron Radiation: A Review. International Journal of Concrete Structures and Materials, 2013 (SCI(E)-(Q2))

DOI: http://dx.doi.org/10.1007/s40069-013-0036-1

On-going Papers

Thermal stability of C-S-H pastes with different Ca/Si ratios. In preparation
Multiscale investigation on the C-S-H structure intercalated by graphene oxide. In preparation
Effect of nano-calcite and nano-silica on the hydration and mechanical properties of limestone calcined clay cement (LC3) paste. In preparation
Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement exposed to high temperatures. In preparation
Investigating shrinkage characteristics of cement hydrate through repeated heating and same-volume x-ray nanoimaging analysis. In preparation
Reaction Kinetics and Phase Evolutions of Fly Ash-based Geopolymer Incorporating Dehydrated Cement Paste Fines from Nuclear Decommissioning. In preparation

Domestic

7. 석회석 미분말이 혼입된 조강포틀랜드 시멘트 모르타르의 압축강도와 휨강도의 관계, 대한건축학회논문집, 40(5), pp. 199-205.

DOI: https://doi.org/10.5659/JAIK.2024.40.5.199

6. 국내 시멘트 및 콘크리트의 염화물 함유량 현황 분석 및 관련 기준 개선 제언, 한국콘크리트학회논문집, 35(5), pp. 495-504.

DOI: https://doi.org/10.4334/JKCI.2023.35.5.495

5. 그래핀 옥사이드, 기능성 탄소 나노 튜브, 나노 실리카 혼입 비율이시멘트 경화체의 역학적 성능에 미치는 영향, 한국콘크리트학회논문집, 35(1), pp. 101-110.

DOI: https://doi.org/10.4334/JKCI.2023.35.1.101

4. 국산 저품질 고령토의 소성온도에 따른 석회석 소성점토 시멘트(LC3)의 수화물 생성 및 기계적 특성 평가, 한국건설순환자원학회논문집, 10(3), pp. 252-261.

DOI: https://doi.org/10.14190/JRCR.2022.10.3.252

3. 그래핀 옥사이드 혼입 고강도 시멘트 모르타르의 Interfacial Transition Zone(ITZ) 특성에 관한 연구, 한국건설순환자원학회논문집, 10(3), pp. 343–350.

DOI: https://doi.org/10.14190/JRCR.2022.10.3.343

2. 나노 인덴테이션을 통한 경량 고강도 콘크리트 Interfacial Transition Zone (ITZ)의 역학적 특성에 관한 연구, 한국건설순환자원학회논문집, 8(4), pp. 537–544.

DOI: https://doi.org/10.14190/JRCR.2020.8.4.537

1. 석회석 소성 점토 시멘트(LC3) 내 석회석 대체재로서 굴 패각의 친환경적인 재활용 방안, 한국건설순환자원학회논문집, 8(2), pp. 219–226.

DOI: https://doi.org/10.14190/JRCR.2020.8.2.219