Embedded Files
Base Station
Base Station
map_0000.xlsx (sheet: basestation)
Location: The location of BS is defined with the building, where possibly more than two hexahedron components consist of the building. (The map data on the right side is map_kaist.xlsx, which is the place around the north gate of KAIST.)
Number of array antenna: The antenna array of BS might have multiple antennas in the horizontal and vertical directions, which can also be manipulated on map_0000.xlsx.
Direction of array antenna: The default direction of the antenna array is [0,-1,0], where the horizontal antennas are aligned in [1,0,0], and the vertical antennas are aligned in [0,0,1]. The heading direction of the array antenna can be calibrated with angles of rotation and tilt.
Polarization of array antennas: WiThRay supports two types of polarization antenna structure; single pol in the vertical direction (single-ver) and double pols in two orthogonally diagonal directions.
Interval of array antennas: The interval of array antennas can be defined in two ways. If you want to set the antenna interval as a half lambda, fill in half lambda in "intv. of antennas." The antenna interval can also be defined manually by writing the exact distance in meter [m].
[KAIST around the north gate]
IRS (intelligent reflecting surface)
IRS (intelligent reflecting surface)
map_0000.xlsx (sheet: irs)
Location: The location of IRS is defined with the building, where possibly more than two hexahedron components consist of the building. Since the IRS is installed at the side wall of the building, which side to put up should also be defined.
Number of array panels: The IRS might have multiple panels in the horizontal and vertical directions, which can be manipulated on map_0000.xlsx.
Interval of array panels: The interval of array panel can be defined in two ways. If you want to set the panel interval as a half lambda, fill in half lambda in "intv. of cell." The cell interval can also be manually defined by the exact distance in meter [m].
Subcell setting: The IRS model in WiThRay is introduced in [1], where the discrete cell type panel consists of multiple subcells in the array structure. Thus, the number and size of subcells should be defined.
[1] M. Najafi, V. Jamali, R. Schober, and H. V. Poor, "Physics-Based Modeling and Scalable Optimization of Large Intelligent Reflecting Surfaces," in IEEE Trans. on Commun., vol. 69, no. 4, pp. 2673-2691, April 2021.
UE (user equipment)
UE (user equipment)
map_0000.xlsx (sheet: ue)
Number of array antenna: The atenna array of UE might have multiple antennas in the horizontal and vertical directions, which can also be manipulated on map_0000.xlsx.
Antenna type: WiThRay supports two types of antennas for UE; a dual-pol antenna and a plate antenna.
Interval of array antennas: The interval of array antennas can be defined in two ways. If you want to set the antenna interval as a half lambda, fill in half lambda in "intv. of antennas." The antenna interval can also be defined manually by writing the exact distance in meter [m].
Speed: In the trajectory-type data, the consecutive positions of UE are first defined with the speed of UE. The grid-type data does not use this parameter.
Height: This is a relative distance of UE from ground, which should be manually defined in meter [m].
VEH (vehicle)
VEH (vehicle)
map_0000.xlsx (sheet: veh)
Vehicle type: Three types of vehicles are modeled in WiThRay; car, SUV, and bus.
Speed: In the trajectory-type data, the consecutive positions of VEH are defined with the speed of VEH. The grid-type data does not use this parameter.
Physical coefficient (refletion): According to the material of vehicle, the reflecting coefficient can be defined.
Page updated
Google Sites
Report abuse