HFM Porting Service
Cbn / pcd Surfacing
Machining & Labor Operations
Hand Ported Intake, Exhaust, & Combustion Chambers
Professional Competition Quality Valve job
Valves Cleaned & Precision Ground
CBN milled to ensure flatness
Set springs for Bind Heights
Cleaning/Prep using UltraSonic to ensure internal passages are clear & free of debris
Smoothing of all edges and deburing casting flash
Multi angle seat cutting
Prices for labor only. All parts extra
Seat and valve job (16) $320.00 fully blended. Standard
Grind Valves. Standard valve 45deg seat angle $2.00 per valve additional back angles $1.00 per valve
Broken stud removal 10.00
Surface Heads Starting @ $70.00 ea for flatness add $15 up to .030
Install Seats (per seat) $5.00
Replace guides (per guide) $2.50
Hone Guides (per guide) $2.50
Flow Test one port w/flow sheet $35.00
reflow one port $20.00
Flow Test every port w/flow sheet $150.00
Cleaning $50.00 per head.
Chemical degreased
Media blasted for hard deposit
Ultra Sonic cleaning for passages and metal finish.
Ultra Sonic Cleaning
Flow testing intake with Cylinder head
Pic of stock exhaust port of LS cylinder head
Super flow 600 using Performance Trend software
Ported lower of
GT 40 intake