Everything You Need to Know About This Process

Hydro Jetting: Everything You Need to Know About This Process

Blocked drains and sewerage are not only a nuisance but may cause bad smells, water leakages and expensive repairs when not dealt with properly. Although short-term solutions such as plunging and snaking may provide temporary relief, it may not be effective in terms of long-term outcomes.

That is where Hydro Jetting enters the picture.

It is a strong, contemporary plumbing service that involves high-pressure water to remove years of accumulation and get your pipes back to almost original condition. This is a complete guide that will tell us what hydro jetting is, how it works, the advantages of hydro jetting, when it is used and why it could be the most intelligent investment you ever make on your plumbing system.

What Is Hydro Jetting?

Hydro jetting is a professional drain-cleaning procedure, which is carried out by high-pressure hose and a special nozzle that sprays water through your plumbing system at pressures as high as 4,000 PSI (pounds per square inch). The water pressure cleans the inside of the pipes, disintegrating obstructions and sweeping out the rubbish.

Hydro jetting, as opposed to traditional snaking, cleans out the entire diameter of the pipe as opposed to just punching a hole through the clogs. It also cleans out grease, sludge, soap scum, mineral deposits and even tree roots in certain situations.

How Does Hydro Jetting Work?

Hydro jetting process is a combination of a few major steps to be followed in order to make the process as effective and safe as possible:

1. First Camera Checkup

The first step before hydro jetting starts is a video inspection of your pipes by plumbers to determine the clog and the damages to your pipes. This is an important step--high-pressure water on a broken or rotten pipe may aggravate the situation.

2. Access and Installation

After the pipes have been determined safe, a hose that has a jetting nozzle is put into a cleanout (an opening to your plumbing system). Its nozzle consists of a number of holes, through which the water sprays forward to blast through obstructions and vice versa, to push the hose and wash away debris.

3. High-Pressure Cleaning

The nozzle pumps high pressure on the water. The water forces its way through the obstructions and cleans the surface of the pipes as the hose goes through the pipe.

4. Final Inspection

Once the cleaning is done, a second camera inspection is done to make sure the clog is removed and no damage has been done during the process.

When Should You Use Hydro Jetting?

Hydro jetting is not always the initial drain cleaning procedure, it is normally used when other techniques are ineffective, or when an in-depth cleaning is required. These are typical situations in which hydro jetting is the best choice:

• Repeated clogs that keep on reoccurring despite snaking or plunging

• Slow draining sinks, shower, or tubs

• Bad smells emanating out of your drains

• Clogged drains in the kitchen or restaurant kitchens

• Roots in sewer line

Older or overworked plumbing systems Preventative maintenance.

Hydro jetting can be a long-term solution to these common plumbing headaches whether you are a homeowner, property manager or business owner.

Benefits of Hydro Jetting

Hydro jetting has a number of benefits compared to the conventional techniques and is, therefore, one of the most effective drain-cleaning solutions today.

1. Thorough Cleaning

In contrast to snaking whereby a residue might be left behind, hydro jetting eliminates all blockage and build up. It puts your pipes back to new condition.

2. Long-Term Results

Hydro jetting is effective in that the entire interior of your pipes will be cleaned, and this will greatly minimize the possibility of future clogs. It is not only a short-term solution, but a proactive one.

3. Eco-Friendly

Hydro jetting does not require any harsh chemicals that may destroy your plumbing or pollute the environment.

4. Most Pipe Safe

Hydro jetting is safe on most of the pipe materials such as PVC, cast iron and copper provided that it is done by a licensed professional.

5. Cost-Effective

The hydro jetting can be more expensive than snaking in the first instance but it can save money in the long term due to the elimination of regular service visits and emergency repairs.

Residential vs. Commercial Hydro Jetting

Hydro jetting can be used in both homes and businesses and the requirements and frequency of use may vary.

Hydro Jetting of Residences

• Hydro jetting is perfect in instances where the homeowner has had repeated problems with the plumbing system or wants preventative maintenance. These are used commonly as:

• Greasy and soapy kitchen drains

• Toilet sinks blocked by hair or toothpaste bits

• Tree roots or sediment that result in sewer line back-ups

Commercial Hydro Jetting

Hydro jetting is critical to regular maintenance of commercial properties, and particularly those with demanding plumbing requirements. Plumbing systems are used in restaurants, hotels, schools, and hospitals to ensure that they work effectively.

Frequent hydro jetting may eliminate downtimes, keep the hygiene at a high level, and prolong the lifecycle of costly infrastructure.

Is Hydro Jetting Safe for Old Pipes?

The question that property owners usually ask is the safety of hydro jetting on older plumbing systems. It depends on whether the pipes are in good condition.

In the first inspection of the camera, the technician will determine whether your pipes are structurally sound. Hydro jetting might not be appropriate in case the pipes are weak, broken, or already damaged. In this scenario, other approaches such as low-pressure cleaning or replacement of the pipes can be suggested.

Hydro jetting is very safe and effective when conducted by an expert.

How Often Should You Schedule Hydro Jetting?

How often you hydro jet will depend on the type of property you own and how you use plumbing:

• Depending on the condition of the pipes and the habits of use, homeowners might require hydro jetting once every 1-2 years.

• Commercial kitchens and restaurants might need hydro jetting after every 3-6 months since they have a lot of grease that clogs up.

• Frequently clogged properties or older properties can use a yearly check and clean.

Your plumber will assist you to identify the most appropriate maintenance schedule that suits your requirement.

DIY Hydro Jetting: Is It a Good Idea?

Although consumer grade pressure washers and jetting attachments are on the market, DIY hydro jetting is not advised. It involves high pressure which needs skill and training to prevent injury or damage of the pipes. Industrial-grade equipment is used by professional plumbers, they make a detailed inspection, and they are aware of the way to deal with complications.

To ensure your own safety, as well as the safety of your plumbing system, never use an unlicensed plumber to perform hydro jetting services.

Conclusion

Hydro jetting is one of the best plumbing systems in the market. It has powerful and long-term cleaning capabilities which remove the most stubborn clogs and accumulation. Hydro jetting is an effective, environmentally friendly, and a quick method of dealing with frequent backups, foul odors in the drains, and slow water movement.

Investing in hydro jetting does not only address an issue, but it also saves your home or business against future plumbing emergencies and expensive repairs.

When your drains are causing you problems, do not wait until a clog turns into a disaster. Call a reputable plumbing expert and inquire whether hydro jetting is suitable to your property.