HVAC Service Burnaby

Plumber

How To Maintain Your HVAC System

There are many ways to maintain your HVAC system. Odds are during winter months your heater runs all day attempting to keep the house warm. HVAC systems generally run longer than needed due to incorrect settings. There there are various areas in the heating section to take a look at when troubleshooting for proficiency.

Air Filters

This part is what gets talked about probably the most in conversations about heating maintenance but is usually forgotten. When there is a obstruction you either run the chance of not distributing heat adequately or possibly starting a fire|When the air filter becomes dirty air will not flow through as well which suggests the unit must work overtime and will also mean a risk of fire. When a system works harder it costs more to operate. You want eliminate any chance of fire. Neither scenario is good for the pocket book or your peace of mind..

The Blower

Examine the blower blades to ensure they are free of crap. If there is any build-up of dirt and dust your fan will work overtime to blow the air out and your heating will be overexerting itself. This means the system is overworking and costing more money to run.

Fire Damper

Next look at the fire damper to make sure it is running properly. The fire damper is self-explanatory so take note of this aspect.

The Flex Duct

Air ducts can get damaged over the years. If there are obstructions or if the duct has collapsed anywhere the HVAC system will think the correct temp has been reached which can be wrong. Finally your system will be working harder to keep your house cool as you continue lowering the thermostat to reach cozy settings.

Insulation

It is easy to miss the insulation but is one of the most typical reason behind a system malfunctioning. Take the time to look at the insulation between the duct work and the outside to ensure it has not worked itself loose. If this happens your system will not reach optimal temperatures and work too hard to try and accommodate.

Air Ducts

Make be certain the ductwork is hooked up in all places to all sections. These detachments can cause cracks in the airflow and result in a loss of hot air in your house since it will be escaping through the spaces.

Return Air Inlets

Ensure that that return air intakes are free of the dust and dirt so air can easily flow.

Zone Dampers

Check out the zone dampers to see if they are in the right position. During the year we may change the positioning of the damper for a lot of reasons (i.e. getting into a tight space or arranging for storage). For a properly working system check to see that the dampers are actually in the best place.

If that is a little too much to handle by yourself we propose you hire an area plumbing contractor licensed for HVAC and heating repair. There will be a number of heating companies close to you who will take care of all of this quite skillfully. For the best results you could arrange annual maintenance for HVAC and your heating people will call every year to take care of it.

Burnaby is a city in British Columbia, Canada, located immediately to the east of Vancouver. It is the third-largest city in British Columbia by population, surpassed only by nearby Surrey and Vancouver. Wikipedia

Weather: 16 °C, Wind E at 5 km/h, 82% Humidity

Local time: Thursday 10:25 a.m.

Population: 239,059 (2014) United Nations

Burnaby

Place ID ChIJc4OcIah3hlQRabFSh3NyCt0

Burnaby, BC, Canada