Canon manufacturers offer the most cost-efficient printers in the market while offering the same level of customer satisfaction as expensive printers do. If you’re looking for a powerful yet affordable printer for office or personal use, look no further than the Canon printer by visiting its official website. To get started with the installation, visit canon.com/ijsetup today to download & install Canon printer drivers and software.
Please follow the steps given below for setting up a new Canon printer for the first time.
Unbox the printer.
Place it on a flat surface.
Remove all the papers, cables, ink cartridges, and other printer parts from the box.
Extend the rear tray of the printer and the output tray extension as well.
Insert one end of the printer cable into the wall outlet and the other end into the printer’s rear side.
At this stage, do not connect the printer with the computer just yet.
Press the POWER button to turn on the printer.
Once you’ve removed the printer from the packaging, please follow the steps given below for assembling your Canon printer.
Open the Top Cover and remove the printhead from the packaging.
Remove the orange protective cap.
Insert the Print Head.
Before moving forward, please ensure that the printhead is correctly installed and locked firmly in place.
Now, peel off the protective film and altogether remove it from the printer.
Moreover, pull the orange tape and remove it from the printer as well.
Please ensure that no extra film is left behind. Otherwise, the ink may lead or not work correctly due to air blockage.
Now, carefully twist OFF the protective cap and discard it. The second cap is located at the bottom of the ink tank.
Follow these steps to set up Canon ink cartridges:
Carefully insert the ink tank and press the mark on the sides of it. This will ensure the ink tank is firmly placed in its location.
Make sure the ink lamp lights red.
Follow the same method and install all the remaining ink tanks according to their color labels.
The printer starts operating. Wait for about 2 minutes until the printer stops making noise.
Usually, most printers take a minimum time of 2-5 minutes for the initial run.
The initial run helps the printer to settle down all the mechanics and software settings.
This concludes the Canon printer setup.
Drivers are programs that bridge the connection between external hardware components and the computer. To start the driver installation process through canon.com/ijsetup, please follow the steps given below.
Power ON your computer.
Open your CD-ROM and insert the software CD that comes with the printer.
Double-click the “My Computer” icon and select CD-ROM.
Now, select “”PCL”” or “”UFRII””> “”uk_eng.””
You can now start the driver installation process.
To begin the setup process, double-click on the driver installer.
Select your preferred installation method and click on “Next.“
Read the license agreement carefully. Click “Yes.“
Select “Manually Set Port to Install” and then click “Next.
Select your preferred method under the ” process to install the printer driver.”
Once selected, click “Next.“
Now, you have two options. First, install a new printer driver. The second option is updating the previously installed drivers.
Now, select the “Canon Driver Information Assist Service” option. This option will allow you to download & use Canon’s driver assistant tool, “Canon Driver Information Assist Service.”
“Canon Driver Information Assist Service” works with the printer driver to provide convenience and ease of use while updating the printer drivers.
Now, you’ll see a bunch of driver options. Select your preferred printer drivers and click on the “Add” button.
Check that the printer driver you want to install is selected in the ”Printer List for Driver Installation” and then click “Next.”
Select your printer model name and click on “Set as Default.“
Your Canon printer will now be used as the default printer on your current computer.
Click Next.
To verify the installation settings, click “Start.”
Wait for the installer to install all the necessary files and settings.
When the field is copied, click “Exit.”
Once installed, restart your computer.
The driver is now installed.
This concludes the Canon driver installation by going to canon.com/ijsetup.
Please follow the steps given below for downloading and installing Canon printer drivers via canon.com/ijsetup.
If your computer does not support software installation through CDs and DVDs, you can download them from the internet.
Open your internet browser and go to canon.com/ijsetup.
Once you’re on the website, select your printer model.
You can retrieve the printer model number from the printer’s rear side. Additionally, you can get your printer model number from the printer user manual.
Once you have the printer model number with you, enter it on the website and follow the on-screen instructions to download and install the printer drivers.
Once installed, restart your computer to finish.
To set up a wireless connection for your Canon printer, first, download the Canon PRINT app on your smartphone device. Secondly, press the WPS push button to connect your printer to the same network as your smartphone. Lastly, synchronize the connection using the app, and you’re done! Your Canon printer can now print wirelessly.
Download and install the Canon printer app on your smartphone. Follow the on-screen instructions and tap on the CONNECT VIA WIRELESS ROUTER. After that, tap on the “Add Printer” icon and then tap on “Printer Setup.” Now, select your network and enter the password to connect your Canon Pixma printer to your mobile.
Unbox the printer and connect it to your computer system. After that, download and install the drivers on your computer via canon.com/ijsetup. Once installed, select the connection type and follow the on-screen instructions to complete the Canon printer installation process.