How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a memory-foam replacement pad built specifically for the Marshall Monitor and backed by a one-year defect warranty, choose HTINDUSTRY Earpads Replacement Cushion; if you need white protein-leather pads sized for Zihnic Bluetooth over-ear headphones and you're chasing a softer clamp, choose YDYBZB White Ear Pads.
• HTINDUSTRY — biggest strength: Purpose-built fit for the Marshall Monitor, with softer protein leather over memory foam and a one-year warranty against manufacturer defects.
• HTINDUSTRY — biggest trade-off: It's a single-model pad. If you don't own the Marshall Monitor, the fit isn't for you, and the finish is a standard faux leather rather than a colored one.
• YDYBZB — biggest strength: A firmer memory-foam core that conforms to the ear, plus a white finish that's genuinely hard to find in replacement pads.
• YDYBZB — biggest trade-off: No warranty, and it's cut for Zihnic Bluetooth over-ear headphones — not a universal pad.
• Who HTINDUSTRY is for: Marshall Monitor owners who want an OEM-style restoration and a safety net if the pad fails.
• Who YDYBZB is for: Zihnic owners who want white pads, a lighter clamp, and stronger passive isolation from a firmer foam.
The HTINDUSTRY pad is a straight-up restoration part. It's listed as compatible with the Marshall Monitor over-ear stereo headphone, and that's the whole point — you're not shopping for a generic circle of foam, you're shopping for a pad shaped and sized to land correctly on that specific headphone. That matters more than people expect. A pad that's slightly off in circumference or depth changes how the driver sits relative to your ear, and it changes how the headphone clamps.
The materials are the other half of the story. Softer protein leather on the surface, memory foam underneath. Protein leather is the standard choice for replacement pads because it's skin-friendly relative to cheaper vinyl and it stays supple rather than going brittle. Memory foam is what gives you the slow rebound — it compresses where your ear and skull press hardest and then pushes back. In practice that means less of a hot spot behind the ear over a long session and a better seal around the ear, which is what actually blocks outside noise. HTINDUSTRY frames it as comfort plus noise reduction, and that pairing is honest: the seal does the isolating, not any electronics.
Installation is tool-free, which is how these jobs should go. The listing also includes a 24-hour customer-service response commitment and a one-year warranty against manufacturer defects. In my opinion, that warranty is the real differentiator here — replacement pads are a wear item, and a stated defect warranty is unusual in this category.
YDYBZB White Ear Pads: Who It's For
YDYBZB is solving a different problem. These pads are compatible with Zihnic Bluetooth over-ear headphones, and they're white — which is the headline feature, because white replacement pads are a niche within a niche. If your Zihnic headphone came in a light colorway and the stock pads have gone grey and shiny, a black replacement pad looks like a repair. A white one looks like the headphone you bought.
The construction is protein leather over memory foam, same family as the HTINDUSTRY pad, but the emphasis is different. YDYBZB describes a firmer memory-foam cushioning, and firmer foam does two things. First, it conforms to the shape of your ear rather than flattening under it, which is what the listing means by an "ear-conforming fit." Second, firmer foam holds a seal against the side of your head more consistently, and a consistent seal is what isolates you from your environment and keeps bass from leaking away. That's the mechanism behind the "enhanced sound" claim — not a driver change, just better coupling.
The comfort angle is specific and worth noting: YDYBZB calls out relief from the pressure that strong-clamping headphones create during long listening sessions. If your Zihnic set grips hard, a thicker, firmer pad spreads that force over more surface area. The published dimensions back the thickness up — 20 mm thick, 70 mm wide, 90 mm long, roughly 3.54 x 2.76 x 0.39 inches. Twenty millimeters is a substantial pad. It'll sit your ear further from the driver and add a little physical bulk to the headphone.
What you don't get is a warranty. YDYBZB states none. The package is one pair of white protein-leather pads, and the pad weight is listed at 4.54 g.
Buy it if: you own Zihnic Bluetooth over-ear headphones, you want white, and you want a firmer pad that relieves clamp pressure. Skip it if: you need a warranty, or you own a Marshall Monitor or any non-Zihnic model.
• Best for the Marshall Monitor → HTINDUSTRY Earpads Replacement Cushion. It's the only one of the two listed as compatible with that headphone.
• Best for Zihnic Bluetooth over-ear headphones → YDYBZB White Ear Pads. Same logic in reverse.
• Best for a white colorway match → YDYBZB White Ear Pads. HTINDUSTRY doesn't list white as an option.
• Best for softer surface feel and a gentler break-in → HTINDUSTRY Earpads Replacement Cushion. Its listing leads with softer protein leather and skin-friendly comfort.
• Best for passive noise isolation → YDYBZB White Ear Pads. The firmer memory foam is what it credits for the ear-conforming seal.
• Best for relieving clamp pressure on a tight headphone → YDYBZB White Ear Pads. That's the exact problem its listing names.
• Best if you want a warranty → HTINDUSTRY Earpads Replacement Cushion. One year against manufacturer defects.
• Best if you want a thicker pad that moves your ear off the driver → YDYBZB White Ear Pads. Its published 20 mm thickness is the concrete number here.
If I owned a Marshall Monitor, I'd buy the HTINDUSTRY Earpads Replacement Cushion. Not because it's fancier — it isn't — but because it's the pad that's actually cut for that headphone, it uses the same protein-leather-over-memory-foam recipe, and it comes with a one-year defect warranty that the other option simply doesn't offer. For a wear part you'll replace again in a couple of years, that warranty is worth more than a color choice.
If I owned Zihnic Bluetooth over-ear headphones, I'd buy the YDYBZB White Ear Pads without much deliberation. They're the compatible option, the white finish is the reason most people land on them, and the firmer foam is the right call if your set clamps hard. Just go in knowing there's no warranty behind them. Either way, check the current price on Amazon before you commit — replacement pads are cheap enough that the decision should be about fit and feel, not a few dollars.
can you sleep with over ear headphones
You can, but it's a bad idea with either of these pads. Both are built around a memory-foam core that's designed to hold a seal while you're upright and still. Lying on your side presses the pad flat against a pillow, which breaks the seal and puts continuous pressure on the ear. If you want to listen in bed, lying on your back with the pads resting lightly is the only position that really works.
how to wear over ear headphones
The pad should sit around your ear, not on it. The opening goes over the ear so the foam rests against the side of your head and the leather seals around the outside edge. That seal is what gives you the isolation both of these pads are designed for — memory foam conforms to the shape of your head, and that conformity is the entire mechanism. If the pad is pressing on your ear itself, it's sitting too far forward or too low.
how should over ear headphones fit
Snug but not tight, with even pressure front to back. The pad should compress slightly all the way around the ear and stay put when you turn your head. The YDYBZB pads are 20 mm thick with a firmer memory-foam core, which spreads clamp force over more area — useful if your headphone grips hard. The HTINDUSTRY pads use softer protein leather, so they tend to feel gentler right away and settle in with use. If you feel a hot spot behind the ear after an hour, the pad is either the wrong size or the headband needs adjusting.
how to wear over ear headphones properly
Get the headband right first, then the pads. Set the band so the pads sit centered over your ears, not tilted, and make sure the left and right cups match. A tilted pad leaks sound and kills bass, because the seal breaks on one side. Both of these are replacement pads, so the fit ultimately depends on the headphone they're going on — the HTINDUSTRY pad is made for the Marshall Monitor, the YDYBZB pad for Zihnic Bluetooth over-ear headphones, and neither is meant to be stretched onto something else.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: YDYBZB Ear Pads Cushion vs Zopsc 3, SOULWIT Earpads vs Callez Ear Cushions, Panasonic clip headphone white vs Bulktech 10: On Ear