PUblication

Lee J., “Inelastic Flange Local Buckling Strength of Ultra High Performance Concrete I-Girders”, Ph. D. Dissertation, Korea University (2018).

Kim, K.D., Lee, J.*, Park, K.Y., and Choi, Y.G., “Design of Single-Span Composite Steel Girder Bridges with End Rotational Springs”, Engineering Structures (IF = 6.4, JCR Top 9.0%, Q1), submitted.

Kim, K.D., Lee, J.*, Park, K.Y., and Choi, Y.G., “Stiffness and Strength Requirements for Point Torsional Bracing of Beams”, Journal of Constructional Steel Research (IF = 4.3, JCR Top 18.4%, Q1), submitted.

Lee, J., and Choo, Y.W.*(2027.1.15), “Theoretical and Analytical Investigation of Local Buckling in Bucket Foundations Under Combined Hydrostatic-Axial Loading Conditions”. Marine Structures (IF = 5.6, JCR Top 9.6%, Q1), 111 (2027), 104204. (https://doi.org/10.1016/j.marstruc.2026.104204)

Mliasghar-Mamaghani M.*, Loveleen L., Chen X., Bjelland A. Hebdon, M., Helwig, T.A., Park, S., Lee, J., and Engelhardt M.D.(2026.12), “Modeling Techniques for Evaluating the Redundancy of Composite Steel Tub Girder Bridges Subjected to Brittle Fracture”. Journal of Bridge Engineering (IF = 3.8, JCR Top 27.2%, Q2), 31 (12), 04026071-1~14. (https://doi.org/10.1061/JBENF2.BEENG-8265)   

Kim, K.D., Lee, J.*, Park, K.Y., and Choi, Y.G.(2026.4.15), “Improved Stiffness and Strength Requirements for Point Lateral Bracing in Beams”, Engineering Structures (IF = 6.4, JCR Top 9.0%, Q1), 353 (2026), 122268. (https://doi.org/10.1016/j.engstruct.2026.122268)

Kim, K.D., Lee, J.*, Park, K.Y., and Choi, Y.G. (2025.12.10), “Optimizing Column Point Brace Designs: Balancing Strength and Stiffness with Buckling Load Equivalence Method ”, Steel and Composite Structures (IF = 3.9, JCR Top 20.9%, Q1), 57(5), 2025, pp. 459-475. (https://doi.org/10.12989/scs.2025.57.5.459)

Han, S., Kim, K., Park, B., Lee, J., Jeon, D., Park, S., and Park, S. (2025.11), “Comparison Study of Concrete Pavement with GFRP Versus Reinforcing Bars: Extensive Review and Numerical Analysis ”, Journal of Asian Architecture and Building Engineering (IF = 1.6, JCR Top 56.3%, Q3). (https://doi.org/10.1080/13467581.2025.2581266)

Lee, J., Byun, N., Ryu, S., and Kang, Y.J.* (2025.3), “DNN-based Estimation of Flexural Strength of Horizontally Curved Bracing System”, Journal of Constructional Steel Research (IF = 4.3, JCR Top 18.4%, Q1), 226, 109203. (https://doi.org/10.1016/j.jcsr.2024.109203)

Byun, N., Lee, J., Noh, Y., and Kang, Y.J.* (2024.12), “Improved mode shape expansion method for cable-stayed bridge using modal approach and artificial neural network”, Advances in Engineering Software (IF = 5.7, JCR Top 8.9%, Q1), 198 (2024), 103766. (https://doi.org/10.1016/j.advengsoft.2024.103766)

Byun, N., Lee, J., and Kang, Y.J.* (2024.07), “Combining long short-term memory and shape superposition for estimating moving load-induced global responses of bridges”, Structure and Infrastructure Engineering (IF = 2.6, JCR Top 38.7%, Q2), 1-16. (https://doi.org/10.1080/15732479.2024.2425763)

Byun, N., Won, J.Y., Lee, J., Lee, Y., and Kang, Y.J.* (2024.7.26), “Global Response Reconstruction of a Full-Scale 3D Structure Model Using Limited Multi-Response Data”, International Journal of Steel Structures (IF = 1.4, JCR Top 68.7%, Q3), 2024. (https://doi.org/10.1007/s13296-024-00875-y)

Byun, N., Lim, J., Lee, J., and Kang, Y.J.* (2024.2.28), “The prototype of a real-time monitoring system for global structural responses of beam structure using wireless sensor network”, Measurement (IF = 5.6, JCR Top 10.3%, Q1), 226, 114192. (https://doi.org/10.1016/j.measurement.2024.114192)

Lee, J., and Kang, Y.J.* (2024.2), “Elastic Local Buckling Coefficients of I-shaped Beams considering Flange-Web Interaction”, Thin-Walled Structures (IF = 6.6, JCR Top 6.9%, Q1), 195, 2024, 111325. (https://doi.org/10.1016/j.tws.2023.111325)

Byun, N., Lee, J., Lee, K., and Kang, Y.J.* (2023.10), “Extended artificial neural network for estimating the global response of a cable stayed bridge based on limited multi-response data”, Smart Structures and Systems (IF = 2.2, JCR Top 46.4%, Q2), 32(4), 235-251. (https://doi.org/10.12989/sss.2023.32.4.235)

Lee, J., Ryu, S., Chung, W.C., Kim, S., and Kang, Y.J. *(2023.1.23), “Estimates of Internal Forces in Torsionally Braced Steel I-Girder Bridges Using Deep Neural Networks”, Applied Sciences, 13, 1499. (https://doi.org/10.3390/app13031499)

Ryu, S., Lee, J., and Kang, Y.J.* (2023.1.20), “DNN-Based Estimation of the Maximum Lateral Flange Moments of Horizontally Curved I-Girder Bridges”, Buildings, 13, 317. (https://doi.org/10.3390/buildings13020317)

Kim, P., Han, W.S., Kim, J.H., Lee, J., Kang, Y.J., and Kim, S.* (2023.1.13), “Analytical Investigation of the Effects of Secondary Structural Members on the Structural Behaviors of Transmission Towers”, Buildings, 13, 223. (https://doi.org/10.3390/buildings13010223)

Kim, D., Cho, S., Kang, Y.J., Lee, K., and Lee, J.* (2022.12), “Shear buckling coefficients of web panels for composite girders considering flange-web stiffness ratio”, Thin-Walled Structures (IF = 6.6, JCR Top 6.9%, Q1), 181, 110005. (https://doi.org/10.1016/j.tws.2022.110005)

Lee, J., Kim, S., and Kang, Y.J.* (2022.11), “Improved design of intermediate diaphragm spacing in horizontally curved steel box bridges”, Journal of Constructional Steel Research (IF = 4.3, JCR Top 18.4%, Q1), 198, 107488. (https://doi.org/10.1016/j.jcsr.2022.107488)

Lee, J., Byun, N., Kang, Y.J., Won, D.H., and Kim, S.* (2022.5.25), “Axial compression behavior of double-skinned composite tubular columns under pure compression on concrete cores”, Steel and Composite Structures (IF = 3.9, JCR Top 20.9%, Q1), 43(4), 431-445. (https://doi.org/10.12989/scs.2022.43.4.431)

Byun, N., Lee, J., Won, J.Y., and Kang, Y.J.* (2022.5.14), “Structural Responses Estimation of Cable-Stayed Bridge from Limited Number of Multi-Response Data”, Sensors, 22, 3745. (https://doi.org/10.3390/s22103745)

Song, J., Kim, J., Lee, J., Kim, S., and Chung, W.C.* (2022.1.31), “Dynamic Response of Multiconnected Floating Solar Panel Systems with Vertical Cylinders”, Journal of Marine Science and Engineering, 10, 189. (https://doi.org/10.3390/jmse10020189)

Lee, J., Kim, S., and Kang, Y.J.* (2022.1), “Effect of cross-sectional rigidity on intermediate diaphragm spacing of steel-box girder bridges”, Journal of    Constructional Steel Research (IF = 4.3, JCR Top 18.4%, Q1), 188, 107006. (https://doi.org/10.1016/j.jcsr.2021.107006)

Lee, J., Lee, K., Kim, S., and Kang, Y.J.* (2021.9.1), “Evaluation of fatigue strength of high-strength grouted connections subjected to unidirectionally reversible cyclic loading”, Ocean Engineering (IF = 5.5, JCR Top 6.0%, Q1), 235, 109384. (https://doi.org/10.1016/j.oceaneng.2021.109384)

Lee, J., Kim, H., Lee, K., and Kang, Y.J.* (2021.8.4), “Effect of Load Combinations on Distortional Behaviors of Simple-Span Steel Box Girder Bridges”, Metals, 11, 1238. (https://doi.org/10.3390/met11081238)

Lim, J., Kang, Y.J., Lee, J., Kim, S., and Lee, K.* (2021.7.17), “Experimental and Analytical Study of Horizontally Curved I-Girders Subjected to Equal End Moments”, Metals, 11, 1132. (https://doi.org/10.3390/met11071132)

Lee, J., Byun, N., Lee, Y., Kang, S.Y., and Kang, Y.J.* (2021.6), “Experimental and numerical evaluations of local buckling in thin-walled UHPFRC flanges”, Thin-Walled Structures (IF = 6.6, JCR Top 6.9%, Q1), 163, 107662. (https://doi.org/10.1016/j.tws.2021.107662)

Kim, H., Lim, J., Lee, J., Kang, Y.J., and Kim, S.* (2021.5.21), “Experimental Investigations on Ultimate Behavior of Fabricated Mobile Scaffolds”, Metals, 11, 851. (https://doi.org/10.3390/met11060851)

Byun, J., Lee, J., Lee, K., and Kang, Y.J.* (2021.4.28), “Estimation of Structural Deformed Configuration for Bridges Using Multi-Response Measurement Data”, Applied Sciences, 11, 4000. (https://doi.org/10.3390/app11094000)

Lee, J., Kim, S., Lee, K., and Kang, Y.J.* (2021.4.22), “Theoretical Local Buckling Behavior of Thin-Walled UHPC Flanges Subjected to Pure Compressions”, Materials, 14, 2130. (https://doi.org/10.3390/ma14092130)

Won, D., Lee, J., Seo, J., Kang, Y.J., and Kim, S.* (2020.5), “Hysteretic performance of column-footing joints with steel composite hollow RC columns under cyclic load”, Journal of Building Engineering, 29, 101165. (https://doi.org/10.1016/j.jobe.2019.101165)

Lee, J., Lee, K., Choi, J., and Kang, Y.J.* (2020.5), “Intermediate diaphragm spacing for single-cell rectangular steel box girder bridges considering aspect-ratio”, Journal of Constructional Steel Research (IF = 4.3, JCR Top 18.4%, Q1), 168, 105877. (https://doi.org/10.1016/j.jcsr.2019.105877)

Lee, K., Bassem A., Lee, J., and Kang, Y.J.* (2020.8), “Lateral torsional buckling of ultra-high-performance fibre-reinforced concrete girders”, Magazine of Concrete Research (IF = 4.3, JCR Top 18.4%, Q1), 72(16), 820-836. (https://doi.org/10.1680/jmacr.18.00180)

Lee, J., Won, D.H., Jeong, Y.J., Kim, S.H., Kang, Y.J.* (2017.11.15), “Interfacial shear behavior of a high-strength pile to sleeve grouted connection”, Engineering Structures (IF = 6.4, JCR Top 9.0%, Q1), 151(2017), 704-723. (http://dx.doi.org/10.1016/j.engstruct.2017.08.035)

Lee, J., and Choo, Y.W.*, "Evaluation of local bucking strength of suction bucket foundations considering additional axial loadings during installation", IABSE Congress Incheon 2026, 16-18 Sep. 2026, Incheon, Republic of Korea.

Lee, J., Kim, S., and Kang, Y.J.*, "Parametric study on distortional warping normal stress of single-span rectangular steel box girder bridges considering various deck overhang designs", Proceedings of The 11th International Symposium on Steel Structures (ISSS-2021), 2021.11.04, pp. 98-99.

Lee, J., Byun, N., Won, D., Kim, J., and Kang, Y.J.*, "Response Spectrum Analysis of Bridges supported by Double Skinned Composite Tubular Columns", Proceedings of The 11th International Symposium on Steel Structures (ISSS-2019), 2019.11, pp. 13-16.

Kang, S., Lee, K., Lee, J., and Kang, Y.J.*, "A Study on Examination Wind Turbine Tower Design Criteria Development of South Korea", Proceedings of the 8th International Symposium on Steel Structures (ISSS-2015), 2015.11.05-07, pp. 221-222.

Lee, K., Kim, H., Lim, J., Lee, J., and Kang, Y.J.*, "Ultimate Strength of Simply Supported Steel I-girders Curved in Plan with Equal End Moments", Proceedings of the 8th International Symposium on Steel Structures (ISSS-2015), 2015.11.05-07, pp.153-154.

Kim, H., Lee, K., Lee, J., and Kang, Y.J.*, "An Analytical Evaluation of Flange Local Buckling for Horizontally Curved I-Girders", Proceedings of the 8th International Symposium on Steel Structures (ISSS-2015), 2015.11.05-07, pp. 139-140.

Lee, J., Lee, K., Lim, J., and Kang, Y.J.*, "Spacing of Intermediate Solid Diaphragms for Single-Span Horizontally Curved Steel Box Girder Bridges considering Bending-Distortional Stress Ratio", Proceedings of the 8th International Symposium on Steel Structures (ISSS-2015), 2015.11.05-07, pp.209-210.