You love your new wedding ring in Long Island, NY and you would not want anything to happen to it. Unfortunately, no matter how well a ring is made, accidental damage or even daily wear and tear can loosen the prongs and cause your stone to fall out and get lost.
Before this happens, you need to care properly for your ring and check each of your stones to make sure that they aren’t loose in their setting. Here are some steps to follow.
Check your center stones
If your diamond jewelry in Long Island, NY is set in a classic four or a six-prong setting then take the edge of your fingernail and try to move the stone gently back and forth or up and down. If you cannot do this easily then your stone is secure.
If your piece is set in a bezel or a pave setting, simply take a pin and gently press on the most outward point of the diamond. Try to move the diamond up and down or left and right and see if it moves. Avoid putting too much force as you can loosen the stone.
You can also hold the ring to your ear and try shaking it back and forth to listen for any rattling sounds. If there is a rattling sound, immediately store your piece in a velvet-lined pouch and take it to a professional to repair.
Check your side stones
When checking your side stones, your jewelry store in Long Island, NY will tell you to be gentle. Use the pin test while making sure that your ring is somewhere safe and secure. Accent and side stones have a lot less metal to hold them securely into place which makes them more susceptible to coming loose and falling out.
Wrapping Up
Just keep in mind to always hold your ring by the metal band when putting it on or taking it off. Touching the gemstone constantly can lead to body oils, dust, and dirt gathering onto your stone which can dull its shine. This can also cause the stone to come loose in the setting and fall out.
You should always take your ring every six months to a professional to clean, repair, and maintain it so that it looks new and shiny for years to come.