How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want one pair of replacement cushions that covers the widest spread of JBL Tune over-ear models with memory foam and a one-year manufacturer warranty, choose hopopower Replacement Ear Pads; if you need fresh pads for a Skullcandy Hesh or Hesh 2 and want protein leather with a printed install guide in the box, choose SOULWIT Earpads Replacement.
• hopopower's biggest strength: one pad set listed as compatible with a long run of JBL Tune models — 700/700BT, 710/710BT, 720/720BT, 750/750BT/750BTNC, 760NC and 770NC — so you can order once and know it fits your pair.
• hopopower's biggest trade-off: the listing is built entirely around JBL Tune headphones, so if you own anything else, it simply isn't the right part.
• SOULWIT's biggest strength: a protein leather and high-density foam build aimed at Skullcandy Hesh and Hesh 2, sold as a set that includes a user guide and should take about three minutes to fit.
• SOULWIT's biggest trade-off: no warranty is stated, and the fit is locked to the Hesh and Hesh 2 only.
• Buy hopopower if you're reviving a JBL Tune 700 through 770 and want memory foam plus a stated one-year manufacturer warranty.
• Buy SOULWIT if you own Skullcandy Hesh or Hesh 2 and want a leather-feel surface with step-by-step fitting instructions in the box.
hopopower plays the compatibility game, and it plays it broadly. This one set is listed for the JBL Tune 700(700BT), 710(710BT), 720(720BT), 750(750BT and 750BTNC), 760(760NC) and 770(770NC). That's a lot of Tune generations under a single part number, which matters if you own more than one pair or you're replacing pads on a model that's a few years old.
The build is memory foam — the soft, slow-springback kind that spreads pressure instead of pressing a hard ring against your skull. In hopopower's own description, that foam is there to hold its support over long sessions, and the pads are meant to seal so outside noise stays out and your headphones keep sounding like themselves. The company also points to precision sewing: hand-stitched and glued edges designed not to split, plus an ergonomic shape that hugs the ear. No tools are needed to swap them, and the pads are described as staying put once they're on.
So who should buy these? Anyone running a JBL Tune 700-series headphone whose original cushions have gone flat, cracked or started flaking. It's also a sensible pick if you wear your headphones for hours at a time — the memory foam is the whole point of the design — or if you commute or work somewhere loud and want the seal to do its job. The Black finish keeps things looking stock.
SOULWIT Earpads Replacement: Who It's For
SOULWIT goes the other direction: narrower fit, richer material story. These pads are made for the Skullcandy Hesh and Hesh 2 Wireless over-ear headphones, and that's it. If that's your headphone, you're the target buyer.
The material spec is the interesting part. The pads combine high-grade protein leather on the outside with high-density foam inside, in a Blue finish. That leather surface is what gives you a smooth, wipeable feel against the skin and a firm seal around the ear — SOULWIT's own wording is that the pads "seal around your ears brilliantly," which is the mechanism behind noise isolation. Dense foam plus a snug seal is how passive isolation actually works: you're blocking the path the noise would take, not cancelling it electronically.
SOULWIT also leans into the practical side. A user guide ships in the package, and the company estimates installation at roughly three minutes. That's a real difference if you've never pulled pads off a headphone before and don't want to guess where to pry. The brand's pitch on sound is straightforward: tired old pads hurt what you hear, and a precisely modelled replacement restores the headphone's original performance and makes it look new again. SOULWIT also says it keeps developing ergonomic pads and invites customers to reach out for replacements or refunds if something's wrong — useful, though it's a service statement rather than a formal warranty, and no warranty is listed on this product.
Buy these if you own Hesh or Hesh 2, you've watched the originals disintegrate, and you'd rather have a leather-feel pad with an instruction sheet than figure it out cold. Skip them if your headphones are JBL Tunes — or anything else — because the fit won't be right.
• Best for JBL Tune owners → hopopower Replacement Ear Pads. The compatibility list covers 700/700BT, 710/710BT, 720/720BT, 750/750BT/750BTNC, 760NC and 770NC.
• Best for Skullcandy Hesh and Hesh 2 owners → SOULWIT Earpads Replacement. That's the only fit it's built for.
• Best for long listening sessions → hopopower. Memory foam is the stated core of the design, aimed at support that lasts through a long day.
• Best for a leather-look, wipe-clean surface → SOULWIT. Protein leather over high-density foam, in Blue.
• Best if you want a fitting guide in the box → SOULWIT. A user guide is included and the brand estimates about three minutes to install.
• Best if a stated warranty matters to you → hopopower. It carries a one-year manufacturer warranty; SOULWIT lists none.
• Best for a noise-isolating seal → either, in principle. Both are designed to seal around the ear so less outside sound gets in — hopopower frames it as preserving your headphone's original sound, SOULWIT as excellent isolation.
• Best if your headphones aren't listed anywhere above → neither. These are model-specific parts, not universal pads.
If I owned a JBL Tune 700 through 770, I'd buy the hopopower Replacement Ear Pads. The compatibility spread is wide, the memory foam is aimed squarely at all-day comfort, and the one-year manufacturer warranty gives you something to fall back on — that combination is the safer buy in my opinion. If I owned Skullcandy Hesh or Hesh 2 instead, I'd take the SOULWIT set without hesitation: protein leather, a Blue finish, and an install guide that removes the guesswork. Match the pad to your headphone model first. Everything else is secondary.
FAQ
can you sleep with over ear headphones
how to wear over ear headphones properly
Set the headband so the cups sit centered over your ears, with the pad sealing around the ear rather than pressing on it. Both the hopopower and SOULWIT pads are shaped to surround the ear — if the cushion is squashing your ear flat, adjust the headband or the cup position.
how should over ear headphones fit
Snug but not tight. The pads should seal against your head with even pressure on both sides, and you should be able to wear them for a long session without pressure points. Memory foam, as used in both of these replacements, is what lets the pad conform instead of digging in.
Yes. Worn, flattened pads leak sound and weaken the seal, which is why hopopower describes its pads as maintaining the integrity of your headphones' sound and SOULWIT says old pads negatively affect sound quality. A fresh, properly sealing pad restores the isolation the headphone was designed with.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Yworlln AI Translation Earbuds vs Poounur Earbuds, Krysenix 2.4 vs DockCase Chizha Gaming Audio, Betron BS10 vs EarFun K3, LEEMC Earbuds vs TOZO OpenWear Open Ear