How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-20 · 7 min read · Independent comparison
• Betron BS10 – biggest strength: A 12mm dynamic driver tuned for deep bass, paired with a 3.5mm jack that works with laptops, phones and MP3 players, plus three sizes of ear tips and a carrying case in the box.
• Betron BS10 – biggest trade-off: No microphone, no inline remote and no volume controls — it is a listening-only earbud, and it needs a 3.5mm headphone port to work at all.
• EarFun K3 – biggest strength: A foldable over-ear design built for kids, with a USB-C connector aimed at tablets, Chromebooks and PCs, made from recycled and eco-friendly materials.
• EarFun K3 – biggest trade-off: No active noise cancellation and no mic-free simplicity — it is button-controlled, wired only, and its USB-C plug is for audio devices, not for charging ports.
• Who each is for: Betron BS10 suits adults who want lightweight in-ear bass and a universal 3.5mm plug; EarFun K3 suits kids and teens who need a comfortable, packable over-ear headphone for school and travel.
The Betron BS10 is a classic wired in-ear earphone, and its personality comes straight from the spec sheet. The headline is a 12mm dynamic driver, which is a fairly large driver for an earbud — that size is generally what gives in-ear models their low-end weight, and Betron explicitly tunes it for "deep, solid bass" alongside clear mids and natural vocals. With a 20Hz–20,000Hz frequency range, 16-ohm impedance and 112dB sensitivity, it is an easy load for phones, laptops and tablets to drive. You will not need a headphone amp here.
The design side is just as practical. It weighs 16g, uses an aluminium housing with plastic and silicone, and ships with a 1.2-metre tangle-resistant cord. The ergonomic in-ear shape gives you passive noise isolation — it seals your ear canal, which naturally blocks some surrounding noise without any electronics or batteries. Three pairs of silicone tips (small, medium and large) let you dial in that seal, and a carrying case plus a cable clip keep everything tidy between uses.
So who should buy it? In my opinion, the BS10 fits the person who wants zero friction: no charging, no pairing, no app. It plugs into a 3.5mm jack, has 0ms audio latency for real-time sound, and stays comfortable during commutes, workouts and long listening sessions. The flip side is important, though. There is no microphone, no inline remote and no volume control — so if you take calls or want to skip tracks from the cable, this is not the earphone for you. And if your phone or laptop has dropped the 3.5mm port entirely, you will need an adapter. Skip it if you want a headset, and skip it if you want over-ear coverage rather than in-ear.
The EarFun K3 is a different animal entirely — an over-ear kids' headphone with a specific job. Its connector is an upgraded USB-C plug, and that one detail defines its audience. It is built to connect to Type-C devices: tablets, Chromebooks and PCs. That is the school-and-homework setup for a lot of families, where the tablet or laptop is the main learning device and a 3.5mm jack is nowhere to be found. One caveat the brand states plainly: it is not compatible with USB-C charging ports, so you plug it into an audio-capable USB-C device, not a power brick.
The physical design is aimed at durability and portability. It folds, which makes it far easier to throw in a backpack or a carry case, and it is built from ABS and what EarFun describes as recycled and eco-friendly materials, reducing plastic waste. The 40mm dynamic driver gives it a much bigger diaphragm than the in-ear BS10, which suits the over-ear form factor for stereo sound on video, lessons and music. The specs list 32-ohm impedance and 100dB sensitivity with the same 20Hz–20,000Hz range, and it uses button controls.
Who should buy it? Parents and kids who need one reliable headphone for school, travel and screen time. It weighs 185g, so it is a sit-down or supervised-listening product rather than a gym accessory, and the over-ear fit means no ear-tip fiddling. The clear trade-off: there is no noise cancellation, so it will not silence a noisy classroom or a plane cabin — it is a comfort-and-durability pick, not a quiet-cabin pick. Skip it if you want in-ear isolation, if you need a 3.5mm plug, or if you want a mic for calls.
Side-by-Side: Which Should You Choose?
• Best for bass and in-ear isolation → Betron BS10. A 12mm dynamic driver plus a sealed in-ear fit is the setup for low-end weight and passive noise blocking.
• Best for universal compatibility → Betron BS10. The 3.5mm jack reaches laptops, phones, tablets and MP3 players; the K3 is limited to USB-C audio devices.
• Best for travel and packing → EarFun K3. It folds, so it stows far more easily than a cabled earbud — though the BS10's own hard case and cable clip keep it tidy too.
• Best for long, comfortable listening → EarFun K3. Over-ear cushions avoid ear-canal pressure; the BS10 is comfortable but relies on a tip seal.
• Best for calls and controls → EarFun K3. It has button controls; the BS10 has no mic, no remote and no volume buttons at all.
• Best for workouts and movement → Betron BS10. At 16g with a tangle-free 1.2m cord, it is the lighter, more secure option for activity.
• Best for quiet environments → neither, by design. The BS10 offers passive isolation only, and the K3 has no noise cancellation — pick based on fit, not silence.
If I were buying for myself, I would take the Betron BS10. I want a wired earphone that works with whatever I plug it into, and a 12mm driver with a 3.5mm jack and a tangle-free cord ticks the everyday boxes for me. The lack of a mic is the price you pay, and it is one I would accept for a listening-only pair.
But I would not hand the BS10 to a child for school. For that job, the EarFun K3 is the better call in my opinion: the foldable over-ear build, the USB-C connector for tablets and Chromebooks, and the recycled-material construction all point at a kid who needs something sturdy and easy to pack. Two different buyers, two different right answers — and the specs make that split pretty clear.
They are not really competing for the same buyer. The BS10 is a 16g in-ear earphone with a 12mm driver and a 3.5mm jack; the K3 is a 185g foldable over-ear kids' headphone with a USB-C plug. "Better" depends entirely on whether you want in-ear bass or a durable over-ear for a child.
Does the Betron BS10 have a microphone?
No. Betron states clearly that the BS10 has no microphone, no inline remote and no volume controls — it is designed purely for audio listening. If you need to take calls or control playback from the cable, the EarFun K3's button controls are the relevant alternative.
It connects via USB-C to Type-C audio devices such as tablets, Chromebooks and PCs. EarFun notes it is not compatible with USB-C charging ports, and there is no 3.5mm option — so an older phone with only a headphone jack is not a match.
For a child, I would choose the EarFun K3. The foldable over-ear fit, ABS and recycled-material build, and USB-C connection suit school tablets and travel. The Betron BS10 is the better pick for an adult who wants lightweight wired earbuds for music and workouts.
I do not quote prices here because they change often. Check the current price on Amazon using the button on this page before you decide — the value question is really about which feature set fits your day-to-day use.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.