* Corresponding author
1.Saurabh Pawar, K.U. Yazar*, Khushahal Thool, Wi-Geol Seo, Chang-Gon Jeong, Yoon-Uk Heo, Shi-Hoon Choi, 2026, Anisotropic compression behavior of 316 L stainless steel at room and cryogenic temperatures: The influence of twinning and transformation mechanisms, International Journal of Plasticity, https://doi.org/10.1016/j.ijplas.2025.104572.
2.Souvik Sahoo, Anuja P. Joshi, K. U. Yazar, Shibayan Roy, 2025, Fine-Scale Microstructure, Elemental Distribution, and Dislocation Substructure Formation and Their Influence on Post-deposition Phase Transformation in Additive Manufacturing of Ti-6Al-4V Alloy, Journal of Materials Engineering and Performance, 1-19, https://doi.org/10.1007/s11665-025-12207-0.
3. Aarya Kedar Sathe, Diya Anil Kumar, Krish Mehta, Ashish Kumar Saxena, Vivek K. Barnwal, Sureddy Tejanath Reddy, Satyam Suwas, Shi-Hoon Choi, K.U. Yazar*, 2025, Mitigating room-temperature tensile and creep anisotropy in laser powder bed fusion processed Ti6Al4V by modulating slip activity and intervariant boundary distribution through post-printing heat-treatment, Acta Materialia, 299, 121454, https://doi.org/10.1016/j.actamat.2025.121454.
4. K. U. Yazar , VK Barnwal, AK Saxena, AK Kanjarla, PP Date, K Narasimhan, 2025, The role of through-thickness shear in single point incremental forming: a micromechanical perspective, 2025, The International Journal of Advanced Manufacturing Technology, 1-18, https://doi.org/10.1007/s00170-025-16215-1.
5. Ashish Kumar Saxena, Vivek Kumar Barnwal, K.U. Yazar, N Harshavardhana, Sushil Kumar Mishra, 2025, Dynamic evolution of hard orientations and consequent ductility loss during uniaxial tension of Ti6Al4V alloy, Bulletin of Materials Science, 45, 67, https://doi.org/10.1007/s12034-025-03425-2
6. Jahnavi Vikash Jain, Vivek K Barnwal, Ashish Kumar Saxena, Pranav B Nair, K. U. Yazar*, Satyam Suwas, 2025, Predicting crack nucleation in commercially pure titanium using orientation imaging microscopy and machine learning, Materials Letters, 379, 137593, https://doi.org/10.1016/j.matlet.2024.137593
7. Sureddy Tejanath Reddy, K. U. Yazar*, Sita Choudhary, Satyam Suwas, 2025, Micromechanical Response of Commercially Pure Titanium: Insights from Experiments and Crystal Plasticity Simulations, Materials Transactions, 66, 501-510, https://doi.org/10.2320/matertrans.MT-MC2024016
8. K. U. Yazar, Khushahal Thool, V Kavimani, Aman Gupta, Shi-Hoon Choi, 2024, Microstructural and textural evolution in hexagonal close-packed metals: The case of zirconium, magnesium, and titanium, Crystals, 14, 727, https://doi.org/10.3390/cryst14080727
9. K.U. Yazar, S. Bahl, S. Mishra, V. Sahu, Amit Bhattacharjee, S Suwas, (2023): Microcrack formation mechanisms under normal and dwell fatigue of IMI 834, International Journal of Fatigue, 175, 107724, https://doi.org/10.1016/j.ijfatigue.2023.107724
10. K.U. Yazar, Amit Bhattacharjee and Satyam Suwas, (2022): Effect of Thermomechanical Processing on the Dwell Fatigue Behaviour of Near Alpha Titanium Alloy IMI 834, JOM, 218-231, https://doi.org/10.1007/s11837-022-05547-y
11. K.U.Yazar, S Pawar, KS Park, SH Choi, (2022): Effect of process parameters on the clad morphology, microstructure, microtexture, and hardness of single layers 316 L stainless steel during direct energy deposition, Materials Characterization, 191, 112148, https://doi.org/10.1016/j.matchar.2022.112148
13. K.U. Yazar, S. Mishra, L. Kumar, S. Bahl, T. Kiran Kumar, S Suwas, (2021): Texture induced planar anisotropy of dwell fatigue response in titanium: Insights from experiments and crystal plasticity simulations, International Journal of Plasticity, 152, 103140, https://doi.org/10.1016/j.ijplas.2021.103140.
13. K.U. Yazar, M. Shamitha, S. Suwas, (2021): Texture dependent dwell fatigue response of titanium, Philosophical Magazine, 101, 1443-1470, https://doi.org/10.1080/14786435.2021.1916116
14. S. Mishra, K.U. Yazar, A. Kar, R. Lingam, N.V. Reddy, Om Prakash, and S Suwas, (2021), Texture and microstructure evolution during single point incremental forming of commercially pure titanium, Metallurgical and Materials Transactions A, 52, 151-156, doi.org/10.1007/s11661-020-06000-y
15. K. U. Yazar, S. Mishra, A. Karmakar, Amit Bhattacharjee, S. Suwas, (2020), On the temperature sensitivity of dwell fatigue of a near alpha titanium alloy : role of strain hardening and strain rate sensitivity, Met Trans A, 51, 5036-5042, https://doi.org/10.1007/s11661-020-05914-x
16. K.V. Vaishakh, R. Narasimhan, K.U. Yazar, S. Suwas, (2020), Mixed-mode (I and II) fracture behavior of a basal-textured magnesium alloy, Acta Materialia, 193, 99-114, https://doi.org/10.1016/j.actamat.2020.03. 023.
17. K. Dash, K.U. Yazar, K. Chattopadhyay and S. Suwas, (2020), Graded microstructure and interface in ultrafine grained multi-layered immiscible bimetallic system, Materialia, 13, 100830, https://doi.org/10.1016/j.mtla.2020.100830.
18. S. Mishra, K.U. Yazar, A. M. More, R. Lingam, N.V. Reddy, Om Prakash, S. Suwas, (2020): Elucidating deformation modes in incremental sheet forming process: Insights from crystallographic texture, microstructure, and mechanical properties, Materials Science and Engineering A, 790, 139311, https://doi.org/10.1016/j.msea.2020. 139311.
19. S. Acharya, S. Mishra, K.U. Yazar, K. Chatterjee, and S. Suwas, (2020): Evolution of deformation texture in the low modulus β titanium alloys Ti-34Nb-2Ta-(0, 3)Zr-0.5O, Metallurgical and Materials Transactions A, 51, 4045-4058, https://doi.org/10.1007/s11661-020-05850-w
20. D. Karthik, K.U. Yazar, Anuj Bisht, S. Swaroop, Suwas. S, and Chandan Srivastava; (2020): Gradient plastic strain accommodation and nanotwinning in multi-pass laser shock peened 321 steel; Applied Surface Science, 487, 426-432, https://doi.org/10.1016/j.apsusc.2019.05. 130.
21. S. Bahl, S. Mishra, K.U. Yazar, Kola. I.R, Chatterjee. K. Suwas. S, (2019), Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel; Additive Manufacturing, 28, 65-77, https://doi.org/10.1016/j.addma.2019.04. 016.
22. L. Kumar, K.U.Yazar, Sudipta Pramanik, (2019), Effect of fusion and friction stir welding techniques on the microstructure, crystallographic texture and mechanical properties of mild steel, Materials Science and Engineering A, 754, 400-410, https://doi.org/10.1016/j.msea.2019.03.100.
23. V.K.S. Jain, K.U. Yazar, S Muthukumaran, (2019), Development and characterization of Al5083-CNTs/SiC composites via friction stir processing, Journal of Alloys and Compounds, 798, 82-92, https://doi.org/10.1016/j.jallcom.2019.05. 232.
24. K.U. Yazar*, Mishra. S, Narasimhan. K, Date P. P; (2018), Deciphering the deformation mechanism in single point incremental forming: experimental and numerical investigation, International Journal of Advanced Manufacturing Technology, 101, 2355-2366, https://doi.org/10.1007/s00170-018- 3131-2.
K.U. Yazar, PP Date, K Narasimhan , EXPERIMENTAL STUDIES ON SINGLE POINT INCREMENTAL FORMING OF METALLIC SHEETS, IDDRG 2014, Nantes France.
K.U. Yazar, Anish Karmakar, Vivek Sahu, Amit Bhattacharjee, and Satyam Suwas, Normal and dwell fatigue behavior of a near-alpha titanium alloy - IMI 834, The 14th World Conference on Titanium (Ti 2019), Nantes France, https://doi.org/10.1051/matecconf/202032104005